(no subject)

From: Jeremy Messenger <mezz7_at_cox.net>
Date: Wed, 17 Sep 2003 11:59:46 -0500
Last night, I CVSup'ed and did the buildworld/kernel stuff. Then, I reboot 
and I get the busy signal like forever, it looks like the HD is spinning 
forever for no reason. Also, the ATAng can't find my Teac CD-RW..

Here are three attaches..

dmesg-ataog.txt is old kernel sometime before ATAng went in the 
5.1-CURRENT tree.
FreeBSD mezz.mezzweb.com 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Sat Aug 23 
01:09:03 CDT 2003     mezz_at_mezz.mezzweb.com:/usr/obj/usr/src/sys/BSDRULZ  
i386

dmesg-atang.txt and pciconf.txt are from last night 5.1-CURRENT.

Please, let me know if there is something else I can do.. Soon, I am going 
to boot into the yesterday -CURRENT, I think I saw more error with SCSI 
stuff and I will try to collect them. If I get them and I will reply in 
here with the more info.

Cheers,
Mezz


-- 
bsdforums.org 's moderator, mezz.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #3: Wed Sep 17 03:37:47 CDT 2003
    root_at_mezz.mezzweb.com:/usr/obj/usr/src/sys/BSDRULZ
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05a7000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc05a71f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05a72a0.
Calibrating clock(s) ... i8254 clock: 1193255 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1666740493 Hz
CPU: AMD Athlon(tm) XP (1666.74-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x00000000005ce000 - 0x000000000fb49fff, 257409024 bytes (62844 pages)
avail memory = 254504960 (242 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fae40
bios32: Entry = 0xfb2a0 (c00fb2a0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb2d0
pnpbios: Found PnP BIOS data at 0xc00fbc70
pnpbios: Entry = f0000:bca0  Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <761686 MSI ACPI> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=700e1022)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdcb0
PCI-Only Interrupts: 5 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    9    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    D   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    7    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    7    D   0x05  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.1
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.3
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
---- before setting priority for links ------------
\\_SB_.PCI0.LNKA:
	interrupts:	     1     3     4     5     6     7    10    11    12    14    15
	penalty:	100880  1880  1880  1680  1880  1880  1680  1680  1880 10880 10880
	references:	8
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.LNKA:
	interrupts:	     1     3     4     5     6     7    10    11    12    14    15
	penalty:	100880  1880  1880  1680  1880  1880  1680  1680  1880 10880 10880
	references:	8
	priority:	99694
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.1
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base d0000000, size 27, enabled
	map[14]: type 3, range 32, base e3001000, size 12, enabled
	map[18]: type 4, range 32, base 0000c000, size  2, port disabled
found->	vendor=0x1022, dev=0x700e, revid=0x13
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x700f, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1106, dev=0x0686, revid=0x40
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c400, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=7, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c800, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found->	vendor=0x1106, dev=0x3038, revid=0x16
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000cc00, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found->	vendor=0x1106, dev=0x3038, revid=0x16
	bus=0, slot=7, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x3057, revid=0x40
	bus=0, slot=7, func=4
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000d000, size  8, enabled
	map[14]: type 4, range 32, base 0000d400, size  2, enabled
	map[18]: type 4, range 32, base 0000d800, size  2, enabled
pcib0: matched entry for 0.7.INTC (source \\_SB_.PCI0.LNKC)
pcib0: slot 7 INTC is routed to irq 10
found->	vendor=0x1106, dev=0x3058, revid=0x50
	bus=0, slot=7, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e000, size  8, enabled
	map[14]: type 1, range 32, base e3000000, size 10, enabled
pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.LNKD)
pcib0: slot 12 INTA is routed to irq 11
found->	vendor=0x1317, dev=0x0985, revid=0x11
	bus=0, slot=12, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000e400, size  8, enabled
	map[14]: type 1, range 64, base e3002000, size 12, enabled
pcib0: matched entry for 0.15.INTA (source \\_SB_.PCI0.LNKC)
pcib0: slot 15 INTA is routed to irq 10
found->	vendor=0x9005, dev=0x00cf, revid=0x01
	bus=0, slot=15, func=0
	class=01-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e800, size  8, enabled
	map[14]: type 1, range 64, base e3003000, size 12, enabled
pcib0: matched entry for 0.15.INTB (source \\_SB_.PCI0.LNKD)
pcib0: slot 15 INTB is routed to irq 11
found->	vendor=0x9005, dev=0x00cf, revid=0x01
	bus=0, slot=15, func=1
	class=01-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
agp0: <AMD 761 host to AGP bridge> port 0xc000-0xc003 mem 0xe3001000-0xe3001fff,0xd0000000-0xd7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 128M
agp0: gatt -> ag_pdir 0x6ed000
agp0: allocating GATT for 32768 AGP page entries
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe0000000-0xe1ffffff
pcib1:   prefetched decode 0xd8000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base e0000000, size 24, enabled
	map[14]: type 3, range 32, base d8000000, size 27, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 1:5 INTA BIOS irq 5
found->	vendor=0x10de, dev=0x0281, revid=0xa1
	bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xc400-0xc40f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=20 ostat1=50
ata0-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata0-slave:  stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0xd800-0xd803,0xd400-0xd403,0xd000-0xd0ff irq 10 at device 7.5 on pci0
pcm0: <ICEnsemble ICE1232 AC97 Codec (id = 0x49434511)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27
pcm0: Primary codec extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap 787000, 1000; 0xc2633000 -> 787000
pcm0: sndbuf_setmap 7a5000, 1000; 0xc2631000 -> 7a5000
dc0: <ADMtek AN985 10/100BaseTX> port 0xe000-0xe0ff mem 0xe3000000-0xe30003ff irq 11 at device 12.0 on pci0
dc0: Ethernet address: 00:04:5a:79:36:96
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000749, model 0x0001, rev. 1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xe3002000-0xe3002fff irq 10 at device 15.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 422 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x20485540
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xe3003000-0xe3003fff irq 11 at device 15.1 on pci0
ahc1: Defaulting to MEMIO off
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 422 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x20485540
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xd0000-0xd5fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1666740493 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
Waiting 15 seconds for SCSI devices to settle
ata0: spurious interrupt - status=0x7f error=0x7f
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
	Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
GEOM: create disk da0 dp=0xc26fd850
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST336706LW 0109> Fixed Direct Access SCSI-3 device 
pass0: Serial Number 3FD0RQY700007234TV4J
pass0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST336706LW 0109> Fixed Direct Access SCSI-3 device 
da0: Serial Number 3FD0RQY700007234TV4J
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
GEOM: new disk da0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 36701167104 end 36701199359
GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
GEOM: Configure da0s1b, start 268435456 length 536870912 end 805306367
GEOM: Configure da0s1c, start 0 length 36701167104 end 36701167103
GEOM: Configure da0s1d, start 805306368 length 268435456 end 1073741823
GEOM: Configure da0s1e, start 1073741824 length 35627425280 end 36701167103
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Sat Aug 23 01:09:03 CDT 2003
    mezz_at_mezz.mezzweb.com:/usr/obj/usr/src/sys/BSDRULZ
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0583000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc05831f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05832a0.
Calibrating clock(s) ... i8254 clock: 1193256 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1666739919 Hz
CPU: AMD Athlon(tm) XP (1666.74-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x00000000005aa000 - 0x000000000fb49fff, 257556480 bytes (62880 pages)
avail memory = 254652416 (242 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fae40
bios32: Entry = 0xfb2a0 (c00fb2a0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb2d0
pnpbios: Found PnP BIOS data at 0xc00fbc70
pnpbios: Entry = f0000:bca0  Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <761686 MSI ACPI> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=700e1022)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdcb0
PCI-Only Interrupts: 5 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    9    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      1    5    D   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    7    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    7    D   0x05  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.1
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.3
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
---- before setting priority for links ------------
\\_SB_.PCI0.LNKA:
	interrupts:	     1     3     4     5     6     7    10    11    12    14    15
	penalty:	100880  1880  1880  1680  1880  1880  1680  1680  1880 10880 10880
	references:	8
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.LNKA:
	interrupts:	     1     3     4     5     6     7    10    11    12    14    15
	penalty:	100880  1880  1880  1680  1880  1880  1680  1680  1880 10880 10880
	references:	8
	priority:	99694
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.0
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.1
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base d0000000, size 27, enabled
	map[14]: type 3, range 32, base e3001000, size 12, enabled
	map[18]: type 4, range 32, base 0000c000, size  2, port disabled
found->	vendor=0x1022, dev=0x700e, revid=0x13
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x700f, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1106, dev=0x0686, revid=0x40
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c400, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=7, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c800, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found->	vendor=0x1106, dev=0x3038, revid=0x16
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000cc00, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 11
found->	vendor=0x1106, dev=0x3038, revid=0x16
	bus=0, slot=7, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x3057, revid=0x40
	bus=0, slot=7, func=4
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000d000, size  8, enabled
	map[14]: type 4, range 32, base 0000d400, size  2, enabled
	map[18]: type 4, range 32, base 0000d800, size  2, enabled
pcib0: matched entry for 0.7.INTC (source \\_SB_.PCI0.LNKC)
pcib0: slot 7 INTC is routed to irq 10
found->	vendor=0x1106, dev=0x3058, revid=0x50
	bus=0, slot=7, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e000, size  8, enabled
	map[14]: type 1, range 32, base e3000000, size 10, enabled
pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.LNKD)
pcib0: slot 12 INTA is routed to irq 11
found->	vendor=0x1317, dev=0x0985, revid=0x11
	bus=0, slot=12, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000e400, size  8, enabled
	map[14]: type 1, range 64, base e3002000, size 12, enabled
pcib0: matched entry for 0.15.INTA (source \\_SB_.PCI0.LNKC)
pcib0: slot 15 INTA is routed to irq 10
found->	vendor=0x9005, dev=0x00cf, revid=0x01
	bus=0, slot=15, func=0
	class=01-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e800, size  8, enabled
	map[14]: type 1, range 64, base e3003000, size 12, enabled
pcib0: matched entry for 0.15.INTB (source \\_SB_.PCI0.LNKD)
pcib0: slot 15 INTB is routed to irq 11
found->	vendor=0x9005, dev=0x00cf, revid=0x01
	bus=0, slot=15, func=1
	class=01-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
agp0: <AMD 761 host to AGP bridge> port 0xc000-0xc003 mem 0xe3001000-0xe3001fff,0xd0000000-0xd7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 128M
agp0: gatt -> ag_pdir 0x6d1000
agp0: allocating GATT for 32768 AGP page entries
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe0000000-0xe1ffffff
pcib1:   prefetched decode 0xd8000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base e0000000, size 24, enabled
	map[14]: type 3, range 32, base d8000000, size 27, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 1:5 INTA BIOS irq 5
found->	vendor=0x10de, dev=0x0281, revid=0xa1
	bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xc400-0xc40f at device 7.1 on pci0
ata0: pre reset mask=03 ostat0=20 ostat2=50
ata0-master: ATAPI 20 20
ata0-slave: ATAPI 14 eb
ata0: after reset mask=03 stat0=20 stat1=00
ata0-master: ATA 25 25
ata0: devices=08
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0xd800-0xd803,0xd400-0xd403,0xd000-0xd0ff irq 10 at device 7.5 on pci0
pcm0: <ICEnsemble ICE1232 AC97 Codec (id = 0x49434511)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27
pcm0: Primary codec extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap 76b000, 1000; 0xc2637000 -> 76b000
pcm0: sndbuf_setmap 789000, 1000; 0xc2635000 -> 789000
dc0: <ADMtek AN985 10/100BaseTX> port 0xe000-0xe0ff mem 0xe3000000-0xe30003ff irq 11 at device 12.0 on pci0
dc0: Ethernet address: 00:04:5a:79:36:96
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000749, model 0x0001, rev. 1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xe3002000-0xe3002fff irq 10 at device 15.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 422 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x20485540
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xe3003000-0xe3003fff irq 11 at device 15.1 on pci0
ahc1: Defaulting to MEMIO off
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 422 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x20485540
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xd0000-0xd5fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1666739919 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata0-slave: success setting PIO4 on VIA 82C686B chip
acd0: <CD-W516EB/1.0A> CD-RW drive at ata0 as slave
acd0: read 6890KB/s (36026KB/s) write 2755KB/s (2755KB/s), 1456KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): error 5
(probe2:ata1:0:0:0): Retries Exhausted
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): CAM Status 0x39
(probe2:ata1:0:0:0): Retrying Command
(probe2:ata1:0:0:0): error 5
(probe2:ata1:0:0:0): Retries Exhausted
(probe4:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
	Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST336706LW 0109> Fixed Direct Access SCSI-3 device 
pass0: Serial Number 3FD0RQY700007234TV4J
pass0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass1 at ata0 bus 0 target 1 lun 0
pass1: <TEAC CD-W516EB 1.0A> Removable CD-ROM SCSI-0 device 
pass1: Serial Number [
pass1: 16.000MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST336706LW 0109> Fixed Direct Access SCSI-3 device 
da0: Serial Number 3FD0RQY700007234TV4J
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
GEOM: new disk da0
cd0 at ata0 bus 0 target 1 lun 0
cd0: <TEAC CD-W516EB 1.0A> Removable CD-ROM SCSI-0 device 
cd0: Serial Number [
cd0: 16.000MB/s transfers
cd0: cd present [205330 x 2048 byte records]
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 36701167104 end 36701199359
GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
GEOM: Configure da0s1b, start 268435456 length 536870912 end 805306367
GEOM: Configure da0s1c, start 0 length 36701167104 end 36701167103
GEOM: Configure da0s1d, start 805306368 length 268435456 end 1073741823
GEOM: Configure da0s1e, start 1073741824 length 35627425280 end 36701167103
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init

agp0_at_pci0:0:0:	class=0x060000 card=0x00000000 chip=0x700e1022 rev=0x13 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-761 CPU to PCI Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1_at_pci0:1:0:	class=0x060400 card=0x00000000 chip=0x700f1022 rev=0x00 hdr=0x01
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-761 CPU to AGP Bridge  (AGP 4x)'
    class    = bridge
    subclass = PCI-PCI
isab0_at_pci0:7:0:	class=0x060100 card=0x06861106 chip=0x06861106 rev=0x40 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82C686/A/B "Super South" PCI to ISA Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0_at_pci0:7:1:	class=0x01018a card=0x05711106 chip=0x05711106 rev=0x06 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
    class    = mass storage
    subclass = ATA
uhci0_at_pci0:7:2:	class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x16 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
    class    = serial bus
    subclass = USB
uhci1_at_pci0:7:3:	class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x16 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
    class    = serial bus
    subclass = USB
none0_at_pci0:7:4:	class=0x0c0500 card=0x30571106 chip=0x30571106 rev=0x40 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82C686A/B ACPI Power Management Controller'
    class    = serial bus
    subclass = SMBus
pcm0_at_pci0:7:5:	class=0x040100 card=0x34101462 chip=0x30581106 rev=0x50 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT82C686/A/B AC'97 Audio Codec'
    class    = multimedia
    subclass = audio
dc0_at_pci0:12:0:	class=0x020000 card=0x05741317 chip=0x09851317 rev=0x11 hdr=0x00
    vendor   = 'ADMtek Inc'
    device   = 'ADM983 fast ethernet controller'
    class    = network
    subclass = ethernet
ahc0_at_pci0:15:0:	class=0x010000 card=0x341d1462 chip=0x00cf9005 rev=0x01 hdr=0x00
    vendor   = 'Adaptec'
    device   = 'AIC-7899 Ultra160 SCSI Host Adapter'
    class    = mass storage
    subclass = SCSI
ahc1_at_pci0:15:1:	class=0x010000 card=0x341d1462 chip=0x00cf9005 rev=0x01 hdr=0x00
    vendor   = 'Adaptec'
    device   = 'AIC-7899 Ultra160 SCSI Host Adapter'
    class    = mass storage
    subclass = SCSI
none1_at_pci1:5:0:	class=0x030000 card=0x88911462 chip=0x028110de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'GeForce4 Ti 4200 with AGP 8x [NV28]'
    class    = display
    subclass = VGA
Received on Wed Sep 17 2003 - 08:00:58 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:22 UTC