USB card reader (umass) panic on FreeBSD 5.3-STABLE

From: Martin <nakal_at_nurfuerspam.de>
Date: Sat, 30 Oct 2004 17:21:55 +0200
Hi,

it's a while ago that I reported a panic when attaching
a USB card reader device. The panic still exists and
the behavior has not changed.

If I can help somehow to solve this problem, please message me.

System:
FreeBSD 5.3-STABLE #0: Wed Oct 27 01:31:39 CEST 2004

Earlier PR:
http://www.freebsd.org/cgi/query-pr.cgi?pr=i386/65783

umass0: ICSI 2.0 Card Reader, rev 2.00/3a, addr 3
da0: at umass-sim0 bus 0 target 0 lun 0
da0: <ICSI CF CARD       CF 1.3A> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 122MB (250368 512 byte sectors: 64H 32S/T 122C)
da1: at umass-sim0 bus 0 target 0 lun 1
da1: <ICSI MS Card       MS 1.3A> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): ILLEGAL REQUEST asc:25,0
(da2:umass-sim0:0:0:2): Logical unit not supported
(da2:umass-sim0:0:0:2): fatal error, failed to attach to device
(da2:umass-sim0:0:0:2): lost device
(da2:umass-sim0:0:0:2): removing device entry
(da2:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:3): ILLEGAL REQUEST asc:25,0
(da2:umass-sim0:0:0:3): Logical unit not supported
(da2:umass-sim0:0:0:3): fatal error, failed to attach to device
(da2:umass-sim0:0:0:3): lost device
(da2:umass-sim0:0:0:3): removing device entry

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x3c
fault code              = supervisor write, page not present
instruction pointer     = 0x8:0xc05731dc
stack pointer           = 0x10:0xd01b7cac
frame pointer           = 0x10:0xd01b7cb8
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 2 (g_event)
[thread 100026]
Stopped at      g_disk_destroy+0xc: movl        $0,0x3c(%eax)
db> trace
g_disk_destroy(c20b9d80,0,0,c080a3a3,0) at g_disk_destroy+0xc
one_event(66666667,c05767c0,0,d01b7d10,c05767e5) at one_event+0x225
g_run_events(c087c39c,0,4c,c080a3a3,64) at g_run_events+0x15
g_event_procbody(0,d01b7d48,0,0,0) at g_event_procbody+0x25
fork_exit(c05767c0,0,d01b7d48) at fork_exit+0x80
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xd01b7d7c, ebp = 0 ---

The card reader has got 4 slots. Only the first one is in use
and the Compact flash card is recognized correctly. But then
the kernel scans the empty slots and panics. The first empty
slot is handled right, I think.

Martin
Received on Sat Oct 30 2004 - 13:21:59 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:20 UTC