FreeBSD 8: fails booting from slice ad8s1a

From: O. Hartmann <ohartman_at_mail.zedat.fu-berlin.de>
Date: Tue, 06 Jan 2009 01:07:47 +0100
Since January, 3rd my FreeBSD 8/amd64 box won't boot anymore. I have
buildworld the most recent sources. Symptomes: after loading and booting
kernel,
booting suddenly stops and I'm getting prompted for defining the boot
slice like

ufs:/dev/ad8s1a

Typing '?' offers GEOM managed slices/partitions/devices. What changed?

Well, I;m confused, because everything worked perfect on January 3rd
when I recompiled world, but after then, after svn updating again,
booting stops.

What informations should I provide?

dmesg follows:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #29 r186724: Sat Jan  3 17:19:08 CET 2009
    root_at_thor.walstatt.dyndns.org:/usr/obj/usr/src/sys/THOR
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2376.07-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x1<LAHF>
usable memory = 2136616960 (2037 MB)
avail memory  = 2065059840 (1969 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
ioapic0 <Version 1.1> irqs 0-23 on motherboard
netsmb_dev: loaded
kbd1 at kbdmux0
smbios0: <System Management BIOS> at iomem 0xfbdc0-0xfbdde on motherboard
smbios0: Version: 2.3, BCD Revision: 2.3
cryptosoft0: <software crypto> on motherboard
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of e0000, 20000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <SiI 3132 SATA300 controller> port 0xcc00-0xcc7f mem
0xdceffc00-0xdceffc7f,0xdcef8000-0xdcefbfff irq 16 at device 0.0 on pci1
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xd800-0xd8ff mem
0xdcffc000-0xdcffffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
msk0: Ethernet address: 00:15:f2:a2:79:aa
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
mskc0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem
0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xdd000000-0xddffffff irq 17
at device 0.0 on pci3
pci0: <memory> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
nfsmb0: <nForce2/3/4 MCP SMBus Controller> port
0xbc00-0xbc1f,0x600-0x63f,0x700-0x73f irq 20 at device 10.1 on pci0
smbus0: <System Management Bus> on nfsmb0
smb0: <SMBus generic I/O> on smbus0
nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
smbus1: <System Management Bus> on nfsmb1
smb1: <SMBus generic I/O> on smbus1
ohci0: <OHCI (generic) USB controller> mem 0xdcdfe000-0xdcdfefff irq 21
at device 11.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xdcdffc00-0xdcdffcff irq
22 at device 11.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
atapci1: <nVidia nForce CK804 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.0 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
atapci2: <nVidia nForce CK804 SATA300 controller> port
0xb480-0xb487,0xb400-0xb403,0xb080-0xb087,0xb000-0xb003,0xac00-0xac0f
mem 0xdcdfd000-0xdcdfdfff irq 23 at device 16.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce CK804 SATA300 controller> port
0xa880-0xa887,0xa800-0xa803,0xa480-0xa487,0xa400-0xa403,0xa080-0xa08f
mem 0xdcdfc000-0xdcdfcfff irq 20 at device 17.0 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 18.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcm0: <Envy24GT audio (M-Audio Revolution 5.1)> port
0xec00-0xec1f,0xe880-0xe8ff irq 18 at device 8.0 on pci4
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
pcm0: system configuration
  SubVendorID: 0x1412, SubDeviceID: 0x3631
  XIN2 Clock Source: 49.152MHz(192kHz*256)
  MPU-401 UART(s) #: not implemented
  ADC #: 1
  DAC #: 3
  Multi-track converter type: I2S(with volume, 192KHz support, 24bit
resolution, ID#0x0)
  S/PDIF(IN/OUT): 0/1 ID# 0x00
  GPIO(mask/dir/state): 0x3fff85/0x4000fa/0x72
pci4: <serial bus, FireWire> at device 11.0 (no driver attached)
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xa000-0xa007
mem 0xdcdfb000-0xdcdfbfff irq 21 at device 19.0 on pci0
miibus1: <MII bus> on nfe0
e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
nfe0: Ethernet address: 00:15:f2:a2:85:ba
nfe0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci6: <ACPI PCI bus> on pcib6
k8temp0: <AMD K8 Thermal Sensors> on hostb3
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
Timecounter "TSC" frequency 2376069974 Hz quality 800
Timecounters tick every 1.333 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <nVidia> at usbus0
ushub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ushub0: 10 ports with 10 removable, self powered
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <nVidia> at usbus1
ushub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ushub1: 10 ports with 10 removable, self powered
acd0: DVDR <NEC DVD RW ND-3500AG/2.1B> at ata0-master UDMA33
ad8: 238475MB <HDT722525DLA380 V44OA96A> at ata4-master SATA300
ad10: 953869MB <WDC WD1001FALS-00J7B0 05.00K05> at ata5-master SATA300
GEOM: ad8s1: geometry does not match label (255h,63s != 16h,63s).
ad12: 238475MB <HDT722525DLA380 V44OA96A> at ata6-master SATA300
GEOM: ad8s2: geometry does not match label (255h,63s != 16h,63s).
ad14: 152627MB <SAMSUNG HD160JJ ZM100-47> at ata7-master SATA300
ar0: 476950MB <nVidcd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-3500AG 2.1B> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ia MediaShield RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad12 at ata6-master
ar0: disk1 READY using ad8 at ata4-master
hwpmc: TSC/1/64/0x20<REA> K8/4/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
GEOM_LABEL: Label for provider ad14s1 is ntfs/THOR.
Trying to mount root from ufs:/dev/ad8s1a
ugen0.2: <Logitech> at usbus0
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/22.00, addr
2> on usbus0
ums0: 8 buttons and [XYZ] coordinates
Symlink: ums0 -> usb0.2.0.16
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 13
ZFS storage pool version 13
pid 1226 (slapd), uid 389: exited on signal 11
nfe0: link state changed to UP
Received on Mon Jan 05 2009 - 23:22:38 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:40 UTC