Re: USB floppy

From: Alex Keda <admin_at_lissyara.su>
Date: Tue, 28 Jul 2009 22:33:22 +0400
illoai_at_gmail.com пишет:
> 2009/7/28 Alex Keda <admin_at_lissyara.su>:
>> Hi, all =)
>> I have USB floppy.
>> When I plug it, I see in the messages log:
>>
>> Jul 28 21:05:02 HP kernel: ugen0.3: <MITSUMI> at usbus0
>> Jul 28 21:05:02 HP kernel: umass0: <MITSUMI MITSUMI USB FDD 061M, class 0/0,
>> rev 1.10/2.00, addr 3> on usbus0
>> Jul 28 21:05:02 HP kernel: umass0:  SCSI over Bulk-Only; quirks = 0x0100
>> Jul 28 21:05:03 HP kernel: umass0:2:0:-1: Attached to scbus2
>>
>> But... What I can mount? =)
>>
> 
> (I've never used a USB floppy, so I have a deficit
> of direct knowledge)
> 
> You obviously won't be able to mount anything if
> there is no disk in the drive.
I try attach with disk, without disk, insert or remove disk when device 
attached... Nothing =(
> 
> As I recall (and it has been a few years since I
> even saw a floppy disk) most drives are not
> auto-sensing, so you have to rile it up a bit by
> trying to read /dev/fd0c (I think)
> dd if=/dev/fd0c of=/dev/null count=1
> (or variations on that tune)
> (for all I know USB floppies are /dev/daN)
> 
> I would look at the output of
> ls -lrt /dev/ | tail
> And see if anything interesting showed up.
> 
> You can probably play with camcontrol(8) in this
> context too.
> 
> Hopefully someone who has used one can give
> better help.
> 
Received on Tue Jul 28 2009 - 16:33:24 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:52 UTC