On Tue, 19 Jan 2010, Alexander Motin wrote: > Hi. > > I've made a patch, that should solve set of problems of CAM ATA and CAM > generally. I would like to ask for testing and feedback. [snip] Hello, applied this patch to 8-stable recompiled the kernel and rebooted. The kernel did not boot it hangs while probing the ahci-controller. The error message is: ahcich0: Timeout on slot 0 ahcich0: is 00000002 cs 00000000 ss 000000000 rs 00000001 tfs 50 serr 00000000 run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config After that the kernel hangs forever. A 8-stable without the patch shows ahcich0: Timeout on slot 0 run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config and boots but doesn't find any hard disks. It's an Asus M3A-H/HDMI motherboard with AMD SB710 southbridge. The harddisk is an Western Digital WD10EAVS. Both are working with the old ata implementation in AHCI mode. pciconf output of the controller is atapci0_at_pci0:0:17:0: class=0x010601 card=0x43911002 chip=0x43911002 rev=0x00 hdr=0x00 Thanks, Yamagi -- Homepage: www.yamagi.org Jabber: yamagi_at_yamagi.org GnuPG/GPG: 0xEFBCCBCBReceived on Sat Jan 23 2010 - 20:59:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:00 UTC