Re: pcib allocation failure

From: <deeptech71_at_gmail.com>
Date: Thu, 19 May 2011 11:23:42 +0200
On Tue, May 17, 2011 at 10:40 PM, John Baldwin <jhb_at_freebsd.org> wrote:
> On Tuesday, May 17, 2011 2:03:42 pm deeptech71_at_gmail.com wrote:
>> On Tue, May 17, 2011 at 3:44 PM, John Baldwin <jhb_at_freebsd.org> wrote:
>> > On Saturday, May 14, 2011 12:27:59 pm deeptech71_at_gmail.com wrote:
>> >> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>> >> pcib1: failed to allocate initial prefetch window: 0xd0000000-0xfaffffff
>> >>
>> >> the console output is cut shortly after those 2 lines (but the machine
>> >> seems to continue booting, as i have reset'd the machine, after which
>> >> "/" was found to be improperly dismounted).
>> >
>> > So it actually boots fine, but video output breaks during the boot?  Does it
>> > ever come back or it is permanently broken until reboot?
>>
>> the video output is permanently broken until reboot (i was able to
>> gather logs by using delayed rc.d scripts).
>>
>> > Your BIOS is actually violating the PCI spec by assigning the same resource
>> > ranges to two devices on the same PCI bus (the hostb device and the AGP bridge
>> > device).  It's also doing so unnecessarily.
>>
>> ok, i've tried changing random BIOS settings, and found that changing
>> "AGP Aperture Size" from 128M to 64M solved the problem with the new
>> PCI bus driver. (i have a computer with 512MiB of RAM and an AGP video
>> card with 128MiB of RAM.) weird. any comments on that?

(also, i have noticed a ~64Mi detraction in resource ranges)

> Does it still fail to alloc the initial prefetch window in that case?

hmm! good question, there does seem to be another failure with pcib2,
although without any noticable effect on the system's functionality:
pcib2: failed to allocate initial memory window: 0xf7f00000-0xfbffffff

for the sake of completeness, here r the logs, coming from an r222043
kernel with the new PCI bus driver:

========== ``devinfo -rv'' begins ==========
nexus0
  npx0
  apic0
  ram0
      I/O memory addresses:
          0x0-0x9fbff
          0x100000-0x1ff2ffff
  acpi0
      Interrupt request lines:
          9
      I/O ports:
          0x10-0x1f
          0x22-0x3f
          0x44-0x5f
          0x62-0x63
          0x65-0x6f
          0x72-0x7f
          0x80
          0x84-0x86
          0x88
          0x8c-0x8e
          0x90-0x9f
          0xa2-0xbf
          0xe0-0xef
          0x290-0x297
          0x480-0x4bf
          0x4d0-0x4d1
          0x680-0x6ff
          0x800-0x87f
      I/O memory addresses:
          0xc0000-0xdffff
          0xe0000-0xfffff
          0xfec00000-0xfec00fff
          0xfed20000-0xfed8ffff
          0xfee00000-0xfee00fff
          0xffb00000-0xffbfffff
          0xfff00000-0xffffffff
    cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1
      p4tcc0
      cpufreq0
    cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU2
      p4tcc1
      cpufreq1
    pcib0 pnpinfo _HID=PNP0A03 _UID=0 at handle=\_SB_.PCI0
        I/O ports:
            0xcf8-0xcff
      pci0
        hostb0 pnpinfo vendor=0x8086 device=0x2570 subvendor=0x1043
subdevice=0x80f2 class=0x060000 at slot=0 function=0
            I/O memory addresses:
                0xf8000000-0xfbffffff
          agp0
        pcib1 pnpinfo vendor=0x8086 device=0x2571 subvendor=0x0000
subdevice=0x0000 class=0x060400 at slot=1 function=0
handle=\_SB_.PCI0.P0P1
            I/O ports:
                0xd000-0xdfff
            I/O memory addresses:
                0xd0000000-0xf6ffffff
                0xf7e00000-0xf7efffff
          pci1
            vgapci0 pnpinfo vendor=0x1002 device=0x4150
subvendor=0x17ee subdevice=0x2002 class=0x030000 at slot=0 function=0
                Interrupt request lines:
                    16
                pcib1 I/O port window:
                    0xd000-0xd0ff
                pcib1 memory window:
                    0xf7ee0000-0xf7eeffff
                pcib1 prefetch window:
                    0xd0000000-0xdfffffff
              vgapm0
              drm0
            vgapci1 pnpinfo vendor=0x1002 device=0x4170
subvendor=0x17ee subdevice=0x2003 class=0x038000 at slot=0 function=1
                pcib1 memory window:
                    0xf7ef0000-0xf7efffff
                pcib1 prefetch window:
                    0xe0000000-0xefffffff
              drm1
        uhci0 pnpinfo vendor=0x8086 device=0x24d2 subvendor=0x1043
subdevice=0x80a6 class=0x0c0300 at slot=29 function=0
handle=\_SB_.PCI0.USB1
            Interrupt request lines:
                16
            I/O ports:
                0xc880-0xc89f
          usbus0
            uhub0
        uhci1 pnpinfo vendor=0x8086 device=0x24d4 subvendor=0x1043
subdevice=0x80a6 class=0x0c0300 at slot=29 function=1
handle=\_SB_.PCI0.USB2
            Interrupt request lines:
                19
            I/O ports:
                0xcc00-0xcc1f
          usbus1
            uhub1
              ums0 pnpinfo vendor=0x04fc product=0x0801 devclass=0x00
devsubclass=0x00 sernum="" release=0x1611 intclass=0x03
intsubclass=0x01 at bus=1 hubaddr=2 port=1 devaddr=2 interface=0
        ehci0 pnpinfo vendor=0x8086 device=0x24dd subvendor=0x1043
subdevice=0x80a6 class=0x0c0320 at slot=29 function=7
handle=\_SB_.PCI0.EUSB
            Interrupt request lines:
                23
            I/O memory addresses:
                0xf7dffc00-0xf7dfffff
          usbus2
            uhub2
        pcib2 pnpinfo vendor=0x8086 device=0x244e subvendor=0x0000
subdevice=0x0000 class=0x060400 at slot=30 function=0
handle=\_SB_.PCI0.P0P4
            I/O ports:
                0xe000-0xefff
            I/O memory addresses:
                0xf7f00000-0xf7ffffff
          pci2
            skc0 pnpinfo vendor=0x10b7 device=0x1700 subvendor=0x1043
subdevice=0x80eb class=0x020000 at slot=5 function=0
                Interrupt request lines:
                    22
                pcib2 I/O port window:
                    0xe800-0xe8ff
                pcib2 memory window:
                    0xf7ffc000-0xf7ffffff
              sk0
                miibus0
                  e1000phy0 pnpinfo oui=0xac2 model=0x2 rev=0x3 at phyno=0
            pcm0 pnpinfo vendor=0x1274 device=0x5880 subvendor=0x1274
subdevice=0x8001 class=0x040100 at slot=12 function=0
                Interrupt request lines:
                    20
                pcib2 I/O port window:
                    0xec00-0xec3f
        isab0 pnpinfo vendor=0x8086 device=0x24d0 subvendor=0x0000
subdevice=0x0000 class=0x060100 at slot=31 function=0
handle=\_SB_.PCI0.SBRG
          isa0
            pmtimer0
            sc0
            vga0
                I/O ports:
                    0x3c0-0x3df
                I/O memory addresses:
                    0xa0000-0xbffff
            orm0 pnpinfo pnpid=ORM0000
                ACPI I/O memory addresses:
                    0xc0000-0xccfff
            fdc0
            ppc0
            uart0
            uart1
        atapci0 pnpinfo vendor=0x8086 device=0x24db subvendor=0x1043
subdevice=0x80a6 class=0x01018a at slot=31 function=1
handle=\_SB_.PCI0.IDE0
            I/O ports:
                0x170-0x177
                0x1f0-0x1f7
                0x376
                0x3f6
                0xfc00-0xfc0f
          ata0 at channel=0
              Interrupt request lines:
                  14
          ata1 at channel=1
              Interrupt request lines:
                  15
        unknown pnpinfo vendor=0x8086 device=0x24d3 subvendor=0x1043
subdevice=0x80a6 class=0x0c0500 at slot=31 function=3
            I/O ports:
                0x400-0x41f
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0.DRV0
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0.DRV1
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1.DRV0
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1.DRV1
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.MC97
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB3
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB4
    atpic0 pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.SBRG.PIC_
        I/O ports:
            0x20-0x21
            0xa0-0xa1
    atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.SBRG.DMAD
        DMA request lines:
            4
        I/O ports:
            0x0-0xf
            0x81-0x83
            0x87
            0x89-0x8b
            0x8f
            0xc0-0xdf
    attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.SBRG.TMR_
        Interrupt request lines:
            0
        I/O ports:
            0x40-0x43
    atrtc0 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.SBRG.RTC0
        Interrupt request lines:
            8
        I/O ports:
            0x70-0x71
    atkbdc0 pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2K
        Interrupt request lines:
            1
        I/O ports:
            0x60
            0x64
      atkbd0
      psm0
    psmcpnp0 pnpinfo _HID=PNP0F03 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2M
    unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.PCI0.SBRG.SPKR
        I/O ports:
            0x61
    npxisa0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.SBRG.COPR
        I/O ports:
            0xf0-0xff
    unknown pnpinfo _HID=PNP0501 _UID=1 at handle=\_SB_.PCI0.SBRG.UAR1
    unknown pnpinfo _HID=PNP0501 _UID=2 at handle=\_SB_.PCI0.SBRG.UAR2
    unknown pnpinfo _HID=PNP0700 _UID=0 at handle=\_SB_.PCI0.SBRG.FDC_
    unknown pnpinfo _HID=PNP0400 _UID=1 at handle=\_SB_.PCI0.SBRG.LPTE
    unknown pnpinfo _HID=PNPB02F _UID=0 at handle=\_SB_.PCI0.SBRG.GAME
    unknown pnpinfo _HID=PNPB006 _UID=0 at handle=\_SB_.PCI0.SBRG.MIDI
    acpi_sysresource0 pnpinfo _HID=PNP0C02 _UID=46 at
handle=\_SB_.PCI0.SBRG.SIOR
    acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=16 at
handle=\_SB_.PCI0.SBRG.RMSC
    unknown pnpinfo _HID=PNP0C02 _UID=1014 at handle=\_SB_.PCI0.SBRG.P3F6
    acpi_sysresource2 pnpinfo _HID=PNP0C02 _UID=0 at handle=\_SB_.PCI0.SBRG.OMSC
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.P0P2
    unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.P0P2.ILAN
    acpi_sysresource3 pnpinfo _HID=PNP0C01 _UID=1 at handle=\_SB_.RMEM
    acpi_button0 pnpinfo _HID=PNP0C0C _UID=170 at handle=\_SB_.PWRB
    pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.LNKA
    pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.LNKB
    pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.LNKC
    pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.LNKD
    pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.LNKE
    pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.LNKF
    pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.LNKG
    pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.LNKH
    acpi_timer0 pnpinfo unknown at unknown
        ACPI I/O ports:
            0x808-0x80b
========== ``devinfo -rv'' ends ==========
========== ``devinfo -u'' begins ==========
Interrupt request lines:
    0 (attimer0)
    1 (atkbdc0)
    3-7 (root0)
    8 (atrtc0)
    9 (acpi0)
    10-13 (root0)
    14 (ata0)
    15 (ata1)
    16 (uhci0)
    16 (vgapci0)
    17-18 (root0)
    19 (uhci1)
    20 (pcm0)
    21 (root0)
    22 (skc0)
    23 (ehci0)
DMA request lines:
    0-3 (root0)
    4 (atdma0)
    5-7 (root0)
I/O ports:
    0x0-0xf (atdma0)
    0x10-0x1f (acpi0)
    0x20-0x21 (atpic0)
    0x22-0x3f (acpi0)
    0x40-0x43 (attimer0)
    0x44-0x5f (acpi0)
    0x60 (atkbdc0)
    0x61 ----
    0x62-0x63 (acpi0)
    0x64 (atkbdc0)
    0x65-0x6f (acpi0)
    0x70-0x71 (atrtc0)
    0x72-0x7f (acpi0)
    0x80 (acpi0)
    0x81-0x83 (atdma0)
    0x84-0x86 (acpi0)
    0x87 (atdma0)
    0x88 (acpi0)
    0x89-0x8b (atdma0)
    0x8c-0x8e (acpi0)
    0x8f (atdma0)
    0x90-0x9f (acpi0)
    0xa0-0xa1 (atpic0)
    0xa2-0xbf (acpi0)
    0xc0-0xdf (atdma0)
    0xe0-0xef (acpi0)
    0xf0-0xff (npxisa0)
    0x100-0x16f (root0)
    0x170-0x177 (atapci0)
    0x178-0x1ef (root0)
    0x1f0-0x1f7 (atapci0)
    0x1f8-0x28f (root0)
    0x290-0x297 (acpi0)
    0x298-0x375 (root0)
    0x376 (atapci0)
    0x377-0x3bf (root0)
    0x3c0-0x3df (vga0)
    0x3e0-0x3f5 (root0)
    0x3f6 (atapci0)
    0x3f7-0x3ff (root0)
    0x400-0x41f ----
    0x420-0x47f (root0)
    0x480-0x4bf (acpi0)
    0x4c0-0x4cf (root0)
    0x4d0-0x4d1 (acpi0)
    0x4d2-0x67f (root0)
    0x680-0x6ff (acpi0)
    0x700-0x7ff (root0)
    0x800-0x87f (acpi0)
    0x880-0xcf7 (root0)
    0xcf8-0xcff (pcib0)
    0xd00-0xc87f (root0)
    0xc880-0xc89f (uhci0)
    0xc8a0-0xcbff (root0)
    0xcc00-0xcc1f (uhci1)
    0xcc20-0xcfff (root0)
    0xd000-0xdfff (pcib1)
    0xe000-0xefff (pcib2)
    0xf000-0xfbff (root0)
    0xfc00-0xfc0f (atapci0)
    0xfc10-0xffff (root0)
I/O memory addresses:
    0x0-0x9fbff (ram0)
    0x9fc00-0x9ffff (root0)
    0xa0000-0xbffff (vga0)
    0xc0000-0xdffff (acpi0)
    0xe0000-0xfffff (acpi0)
    0x100000-0x1ff2ffff (ram0)
    0x1ff30000-0xcfffffff (root0)
    0xd0000000-0xf6ffffff (pcib1)
    0xf7000000-0xf7dffbff (root0)
    0xf7dffc00-0xf7dfffff (ehci0)
    0xf7e00000-0xf7efffff (pcib1)
    0xf7f00000-0xf7ffffff (pcib2)
    0xf8000000-0xfbffffff (hostb0)
    0xfc000000-0xfebfffff (root0)
    0xfec00000-0xfec00fff (acpi0)
    0xfec01000-0xfed1ffff (root0)
    0xfed20000-0xfed8ffff (acpi0)
    0xfed90000-0xfedfffff (root0)
    0xfee00000-0xfee00fff (acpi0)
    0xfee01000-0xffafffff (root0)
    0xffb00000-0xffbfffff (acpi0)
    0xffc00000-0xffefffff (root0)
    0xfff00000-0xffffffff (acpi0)
ACPI I/O ports:
    0x10-0x1f (root0)
    0x22-0x3f (root0)
    0x44-0x5f (root0)
    0x62-0x63 (root0)
    0x65-0x6f (root0)
    0x72-0x80 (root0)
    0x84-0x86 (root0)
    0x88 (root0)
    0x8c-0x8e (root0)
    0x90-0x9f (root0)
    0xa2-0xbf (root0)
    0xe0-0xef (root0)
    0x290-0x297 (root0)
    0x480-0x4bf (root0)
    0x4d0-0x4d1 (root0)
    0x680-0x6ff (root0)
    0x800-0x807 (root0)
    0x808-0x80b (acpi_timer0)
    0x80c-0x87f (root0)
ACPI I/O memory addresses:
    0xc0000-0xccfff (orm0)
    0xcd000-0xfffff (root0)
    0xfec00000-0xfec00fff (root0)
    0xfed20000-0xfed8ffff (root0)
    0xfee00000-0xfee00fff (root0)
    0xffb00000-0xffbfffff (root0)
    0xfff00000-0xffffffff (root0)
pcib1 I/O port window:
    0xd000-0xd0ff (vgapci0)
    0xd100-0xdfff (root0)
pcib1 memory window:
    0xf7e00000-0xf7edffff (root0)
    0xf7ee0000-0xf7eeffff (vgapci0)
    0xf7ef0000-0xf7efffff (vgapci1)
pcib1 prefetch window:
    0xd0000000-0xdfffffff (vgapci0)
    0xe0000000-0xefffffff (vgapci1)
    0xf0000000-0xf6ffffff (root0)
pcib2 I/O port window:
    0xe000-0xe7ff (root0)
    0xe800-0xe8ff (skc0)
    0xe900-0xebff (root0)
    0xec00-0xec3f (pcm0)
    0xec40-0xefff (root0)
pcib2 memory window:
    0xf7f00000-0xf7ffbfff (root0)
    0xf7ffc000-0xf7ffffff (skc0)
pcib2 prefetch window:
========== ``devinfo -u'' ends ==========
========== ``dmesg'' begins ==========
MP Configuration Table version 1.1 found at 0xc00f1280
Table 'FACP' at 0x1ff30290
Table 'APIC' at 0x1ff30390
APIC: Found table at 0x1ff30390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r222043M: Wed May 18 05:21:58 CEST 2011
    devhc_at_:/usr/obj/usr/src/sys/HQ i386
Table 'FACP' at 0x1ff30290
Table 'APIC' at 0x1ff30390
Table 'OEMB' at 0x1ff40040
ACPI: No SRAT table found
Preloaded elf kernel "/boot/kernel.HQ.r222043.copyin2.opie/kernel" at
0xc0b9d000.
Calibrating TSC clock ... TSC clock: 2798716448 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2798.72-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Family = f  Model = 2  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNXT-ID,xTPR>

Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64
byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64
byte line size
real memory  = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000001f5ecfff, 513568768 bytes (125383 pages)
avail memory = 513884160 (490 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <A M I  OEMAPIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f5020
pnpbios: Entry = f0000:5c0a  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf9e30 00021 (v02 ACPIAM)
ACPI: XSDT 0x1ff30100 0003C (v01 A M I  OEMXSDT  10000414 MSFT 00000097)
ACPI: FACP 0x1ff30290 000F4 (v03 A M I  OEMFACP  10000414 MSFT 00000097)
ACPI: DSDT 0x1ff303f0 0382D (v01  P4P81 P4P81104 00000104 INTL 02002026)
ACPI: FACS 0x1ff40000 00040
ACPI: APIC 0x1ff30390 0005C (v01 A M I  OEMAPIC  10000414 MSFT 00000097)
ACPI: OEMB 0x1ff40040 0003F (v01 A M I  OEMBIOS  10000414 MSFT 00000097)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
acpi0: <A M I OEMXSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc2694000 pa 0x1000
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1fef0000 (3) failed
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    7   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    3   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2570, revid=0x02
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 26, enabled
found->	vendor=0x8086, dev=0x2571, revid=0x02
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24d2, revid=0x02
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xc880, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x24d4, revid=0x02
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	map[20]: type I/O Port, range 32, base 0xcc00, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x24dd, revid=0x02
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf7dffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0xc2
	domain=0, bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24d0, revid=0x02
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24db, revid=0x02
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type I/O Port, range 32, base 0xfc00, size  4, enabled
	map[24]: type Memory, range 32, base 0, size 10, memory disabled
found->	vendor=0x8086, dev=0x24d3, revid=0x02
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
agp0: <Intel 82865 host to AGP bridge> on hostb0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xd000-0xdfff
pcib1:   memory decode     0xf7e00000-0xf7efffff
pcib1:   prefetched decode 0xd0000000-0xf6ffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1
- AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x4150, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x02b0, cachelnsz=4 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
pcib1: allocated prefetch range (0xd0000000-0xdfffffff) for rid 10 of pci0:1:0:0
	map[14]: type I/O Port, range 32, base 0xd000, size  8, enabled
pcib1: allocated I/O port range (0xd000-0xd0ff) for rid 14 of pci0:1:0:0
	map[18]: type Memory, range 32, base 0xf7ee0000, size 16, enabled
pcib1: allocated memory range (0xf7ee0000-0xf7eeffff) for rid 18 of pci0:1:0:0
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x1002, dev=0x4170, revid=0x00
	domain=0, bus=1, slot=0, func=1
	class=03-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=4 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled
pcib1: allocated prefetch range (0xe0000000-0xefffffff) for rid 10 of pci0:1:0:1
	map[14]: type Memory, range 32, base 0xf7ef0000, size 16, enabled
pcib1: allocated memory range (0xf7ef0000-0xf7efffff) for rid 14 of pci0:1:0:1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
0xd0000000-0xdfffffff,0xf7ee0000-0xf7eeffff irq 16 at device 0.0 on
pci1
drm0: <ATI Radeon AP 9600> on vgapci0
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized radeon 1.31.0 20080613
vgapci1: <VGA-compatible display> mem
0xe0000000-0xefffffff,0xf7ef0000-0xf7efffff at device 0.1 on pci1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc880-0xc89f
irq 16 at device 29.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f
irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 50
usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
0xf7dffc00-0xf7dfffff irq 23 at device 29.7 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51
usbus2: EHCI version 1.0
usbus2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usbus2: bpf attached
ehci0: usbpf: Attached
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: failed to allocate initial memory window: 0xf7f00000-0xfbffffff
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xe000-0xefff
pcib2:   no prefetched decode
pcib2:   Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x10b7, dev=0x1700, revid=0x12
	domain=0, bus=2, slot=5, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=4 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf7ffc000, size 14, enabled
pcib2: allocated initial memory window of 0xf7f00000-0xf7ffffff
pcib2: allocated memory range (0xf7ffc000-0xf7ffffff) for rid 10 of pci0:2:5:0
	map[14]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib2: allocated I/O port range (0xe800-0xe8ff) for rid 14 of pci0:2:5:0
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 22
found->	vendor=0x1274, dev=0x5880, revid=0x04
	domain=0, bus=2, slot=12, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type I/O Port, range 32, base 0xec00, size  6, enabled
pcib2: allocated I/O port range (0xec00-0xec3f) for rid 10 of pci0:2:12:0
pcib2: matched entry for 2.12.INTA
pcib2: slot 12 INTA hardwired to IRQ 20
skc0: <3Com 3C940 Gigabit Ethernet> port 0xe800-0xe8ff mem
0xf7ffc000-0xf7ffffff irq 22 at device 5.0 on pci2
skc0: interrupt moderation is 100 us
skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
skc0: chip ver  = 0xb0
skc0: chip rev  = 0x01
skc0: SK_EPROM0 = 0x00
skc0: SRAM size = 0x020000
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:0e:a6:35:15:91
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: OUI 0x000ac2, model 0x0002, rev. 3
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 52
pcm0: <Creative CT5880-E> port 0xec00-0xec3f irq 20 at device 12.0 on pci2
pcm0: <eMicro EM28028 AC97 Codec (id = 0x454d4328)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, no
3D Stereo Enhancement
pcm0: Primary codec extended features surround DAC, AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 169d000, 1000; 0xc2a9d000 -> 169d000
pcm0: sndbuf_setmap 169b000, 1000; 0xc2a9b000 -> 169b000
pcm0: sndbuf_setmap 1699000, 1000; 0xc2a99000 -> 1699000
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
ata1: <ATA channel 1> on atapci0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 55
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 56
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us,
adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
isa_probe_children: probing PnP devices
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
lapic: Divisor 2, Frequency 99952197 Hz
Timecounters tick every 1.000 msec
lo0: bpf attached
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
(aprobe0:ata0:0:0:0): SIGNATURE: 0000
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
(aprobe0:ata1:0:0:0): SIGNATURE: eb14
ata1: DMA limited to UDMA33, controller found non-ATA66 cable
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <Maxtor 6Y080P0 YAR41BW0> ATA-7 device
ada0: Serial Number Y2JPFJPE
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
GEOM: new disk ada0
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <Maxtor 6Y080P0 YAR41BW0> ATA-7 device
pass0: Serial Number Y2JPFJPE(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on,
reset, or bus device reset occurred)
(cd0:ata1:0:0:0): Retrying command (per sense data)

pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass1 at ata1 bus 0 scbus1 target 0 lun 0
pass1: <SONY DVD RW DW-D26A JYS2> Removable CD-ROM SCSI-0 device
pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <SONY DVD RW DW-D26A JYS2> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 51
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 52
Timecounter "TSC" frequency 2798716448 Hz quality -100
GEOM: new disk cd0
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata1:0:0:0): Error 6, Unretryable error
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]...
start_init: trying /sbin/init
ugen1.2: <vendor 0x04fc> at usbus1
ums0: <vendor 0x04fc USB Multi-Smart Mouse, class 0/0, rev 2.00/16.11,
addr 2> on usbus1
ums0: 5 buttons and [XYZT] coordinates ID=1
procfs registered
Linux ELF exec handler installed
linprocfs registered
========== ``dmesg'' ends ==========
Received on Thu May 19 2011 - 07:23:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:14 UTC