Re: iscsictl, Waiting for iscsid(8)

From: Edward Tomasz Napierała <trasz_at_FreeBSD.org>
Date: Fri, 27 Sep 2013 11:32:43 +0200
Dnia 27 wrz 2013 o godz. 09:36 "Sergey V. Dyatko" <sergey.dyatko_at_gmail.com> napisał(a):

> Hi,
> 
> I have a time to play with native iSCSI stack on HEAD. 
> I have desktop (Alpha2, r255812) and laptop (alpha3, r255873M with
> reverted r255870 and r255871)
> On desktop I create following /etc/ctl.conf:
> pidfile /var/run/ctld.pid
> portal-group example2 {
>        discovery-auth-group no-authentication
>        listen 127.0.0.1
>        listen 0.0.0.0:3261
> }
> target iqn.desktop:target0 {
>        alias "Testing target"
>        auth-group no-authentication
>        portal-group    example2
>        lun 0 {
>                path /dev/md0
>                blocksize 4096
>        }
>     }
> 
> tiger# mdconfig -lv
> md0     vnode     200M  /storage/iscsi_test
> tiger# iscsictl -A -h localhost -t iqn.desktop:target0
> 
> dmesg: 
> cfiscsi_ioctl_handoff: new connection from
> iqn.1994-09.org.freebsd:tiger.minsk.domain (127.0.0.1) to
> iqn.desktop:target0
> da0 at iscsi1 bus 0 scbus6 target 0 lun 0 
> da0: <FREEBSD CTLDISK 0001> Fixed Direct Access SCSI-5 device 
> da0: 200MB (51200 4096 byte sectors: 64H 32S/T 25C)
> 
> tiger# ctladm islist -v
> Session ID:      3
> Initiator name:  iqn.1994-09.org.freebsd:tiger.minsk.domain
> Initiator addr:  127.0.0.1
> Initiator alias: 
> Target name:     iqn.desktop:target0
> Target alias:    Testing target
> Header digest:   None
> Data digest:     None
> DataSegmentLen:  131072
> ImmediateData:   Yes
> iSER (RDMA):     No
> 
> tiger# ctladm devlist -v
> LUN Backend       Size (Blocks)   BS Serial Number    Device ID       
>  0 block                 51200 4096 MYSERIAL   0     MYDEVID   0     
>      lun_type=0
>      num_threads=14
>      file=/dev/md0
>      cfiscsi_target=iqn.desktop:target0
>      cfiscsi_target_alias=Testing target
>      cfiscsi_lun=0
> 
> Ok, seems it work
> 
> now laptop:
> laptop# iscsictl -A -h 192.168.9.98 -t iqn.desktop:target0
> nothing new on dmesg..
> 
> laptop# iscsictl -L
> Target name                          Target addr      State
> iqn.desktop:target0                  192.168.9.98     Waiting for
> iscsid(8)
> 
> I have a questions:
> 1) is 'old' iscontrol work with native target (i tried it before, w/o
> success too) ?

You mean, does the old initiator work with the new target?  Sure it does.

> 2) what I missed, why laptop(iscsictl)->desktop(iscsid) do not work in
> my case ?

It says it's waiting for iscsid.  Do you have iscsid running, on the initiator side, i.e. laptop?
Received on Fri Sep 27 2013 - 07:32:54 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:40:42 UTC