Re: pcm0: unable to initialize the card (YMF724)

Thanks for letting me know. I'll look into the problem.

/\ Hidetoshi Shimokawa
\/  simokawa_at_sat.t.u-tokyo.ac.jp
PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html

At Wed, 16 Apr 2003 13:04:59 +0900 (JST),
Munehiro Matsuda wrote:
> 
> Hi all,
> 
> From: Vladimir Kushnir <vkushnir_at_alfacom.net>
> Date: Wed, 16 Apr 2003 00:27:15 +0300 (EEST)
> ::pcm0: <Yamaha DS-1E (YMF724F)> mem 0xeb000000-0 xeb007fff irq 10 at device
> ::16.0 on pci0
> ::ds1: setmap (502000, 1000), nseg=0, error=27
> ::pcm0: pcs=120, rcs=16, ecs=16, ws=0, memsz=1584 4
> ::pcm0: unable to initialize the card
> ::device_probe_and_attach: pcm0 attac returned 6
> 
> I also get similar problem, here too.
> dmesg NG:
> pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0
> pcm0: pcs=120, rcs=16, ecs=16, ws=0, memsz=15844
> pcm0: unable to initialize the card
> device_probe_and_attach: pcm0 attach returned 6
> 
> dmesg OK:
> pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0
> pcm0: <Asahi Kasei AK4543 AC97 Codec>
> 
>  
> I have tracked down that, problem started with rev 1.41 of
> src/sys/i386/i386/busdma_machdep.c and still happens with rev 1.43.
> If I go back to rev 1.40, the problem goes a way.
> 
> Hope this helps,
>  Haro
> =------------------------------------------------------------------------------
>            _ _    Munehiro (haro) Matsuda
>  -|- /_\  |_|_|   Network Solution Dept., Kubota Graphics Technologies Inc.
>  /|\ |_|  |_|_|   2-8-8 Shinjuku Shinjuku-ku Tokyo 160-0022, Japan
>                   Tel: +81-3-3225-0373  Fax: +81-3-3225-0740
>                   Email: haro_at_kgt.co.jp
>