I just tried again with 5-CURRENT, and still get a Integer Divide Exception. I tried adding Nate's 20030328 ACPI code, and it didn't change things. The DB> stuff tells me it's at cbb_intr+22. Warner, Does this give you any hints? Also, when I have the card in slot0, it usually does NOT initialize, but if it's in Slot 1, it does. Dmesg: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #6: Fri Apr 25 04:21:28 CDT 2003 ler_at_lerlaptop:/usr/obj/usr/src/sys/LERLAPTOP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0588000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05880a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1129576034 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1133MHz (1129.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV ,PAT,PSE36,MMX,FXSR,SSE> real memory = 527958016 (503 MB) avail memory = 506650624 (483 MB) Pentium Pro MTRR support enabled ACPI version 20030328 initializing npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <FUJ ERG > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 1 dev 10 func 0 AcpiOsDerivePciId: bus 1 dev 10 func 1 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x18c0-0x18df irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x18e0-0x18ff irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 cbb0: <TI1520 PCI-CardBus Bridge> irq 11 at device 10.0 on pci1 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1520 PCI-CardBus Bridge> irq 11 at device 10.1 on pci1 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xe0200800-0xe02008ff irq 11 at device 13.0 on pci1 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 00:e0:00:7e:d0:45 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fwohci0: vendor=10cf, dev=2010 fwohci0: <1394 Open Host Controller Interface> mem 0xe0200000-0xe02007ff irq 11 at device 14.0 on pci1 fwohci0: PCI bus latency is 64. fwohci0: Could not map memory device_probe_and_attach: fwohci0 attach returned 6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1c00-0x1c1f irq 11 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pcm0: <Intel 82801CA (ICH3)> port 0x1880-0x18bf,0x1000-0x10ff irq 11 at device 31.5 on pci0 pcm0: <SigmaTel STAC9756/57 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 speaker0 port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_ec0: can't install GPE handler for \\_SB_.PCI0.LPC0.EC__ - AE_BAD_PARAMETER device_probe_and_attach: acpi_ec0 attach returned 6 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2e8-0x2ef irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_ec0: can't install GPE handler for \\_SB_.PCI0.LPC0.EC__ - AE_BAD_PARAMETER device_probe_and_attach: acpi_ec0 attach returned 6 orm0: <Option ROMs> at iomem 0xcc800-0xcefff,0xc0000-0xcc7ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec wi0: <The Linksys Group, Inc. Instant Wireless Network PC Card> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1 wi0: 802.11 address: 00:06:25:18:1a:37 wi0: using RF:PRISM3(PCMCIA) wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2) wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ad0: 57231MB <FUJITSU MHS2060AT> [116280/16/63] at ata0-master UDMA100 acd0: CD-RW <SONY CD-RW CRX800E> at ata1-master PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: <SONY CD-RW CRX800E 1.1c> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted /tmp: mount pending error: blocks 0 files 1 /tmp: superblock summary recomputed WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted WARNING: /shared was not properly dismounted /shared: superblock summary recomputed WARNING: /stable/var was not properly dismounted /stable/var: superblock summary recomputed WARNING: /stable/usr was not properly dismounted /stable/usr: superblock summary recomputed WARNING: /stable/tmp was not properly dismounted /stable/tmp: superblock summary recomputed -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: ler_at_lerctr.org US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749Received on Fri Apr 25 2003 - 01:08:15 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:04 UTC