ML370 crash

Hi All,

	I have a Compaq ML370 that freezes during 5.1-RELEASE boot, I tryed the 
default boot, single user boot and disable ACPI boot. I installed 
4.8-RELEASE and then upgraded to CURRENT, make buildworld and 
buildkernel was perfect, after make installkernel, I made a copy of 
/sys/i386/conf/GENERIC.hints to /boot/device.hints and the command ran 
ok too, but when booting with new kernel (/boot/kernel/kernel), the 
server freeze's at same point, after kernel display vga0 device, but now 
with an error message and a prompt to an debugger.

	Follow in attached an dmesg from 4.8-RELEASE that is working and a 
picture off machine's display at crash moment.

   Some Idea ?!

   Best Regards,

Alexandre Biancalana

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root_at_freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (731.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073725440 (1048560K bytes)
avail memory = 1039876096 (1015504K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
sym0: <1510d> port 0x2000-0x20ff mem 0xc6efe000-0xc6efefff,0xc6effc00-0xc6efffff irq 11 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <1510d> port 0x2400-0x24ff mem 0xc6efc000-0xc6efcfff,0xc6efdc00-0xc6efdfff irq 15 at device 1.1 on pci0
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xc6d00000-0xc6dfffff,0xc6efb000-0xc6efbfff irq 5 at device 2.0 on pci0
fxp0: Ethernet address 00:50:8b:de:72:26
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GV graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x3000-0x307f mem 0xc6cfee80-0xc6cfeeff irq 5 at device 5.0 on pci0
xl0: Ethernet address: 00:10:4b:c6:38:24
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x3080-0x308f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
ida0: <Compaq Smart Array 431 controller> port 0x4000-0x40ff mem 0xc6fff000-0xc6ffffff irq 10 at device 3.0 on pci3
ida0: drives=2 firm_rev=1.02
idad0: <Compaq Logical Drive> on ida0
idad0: 17359MB (35553120 sectors), blocksize=512
idad1: <Compaq Logical Drive> on ida0
idad1: 17359MB (35553120 sectors), blocksize=512
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0690 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata0-slave: ATAPI identify retries exceeded
acd0: CDROM <COMPAQ CDR-8435> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/idad0s2a