Re: Problem with PS/2 mouse driver in XFree86 4.3.0

--- Mike Bohan <bogin_at_yokels.org> wrote:
> Hello,
> 
> 	I have an Abit KT266 based motherboard and am having some trouble using
> the PS/2 mouse driver under XFree86.  I have the protocol set to "auto",
> and the device set to /dev/psm0.  This configuration has worked with
> this same Intellimouse in the past.  The symptoms are that that when the
> mouse is moved, the cursor is only updated about once a second.  After
> searching google, I found the following URL in which another person
> experienced the same problem (from freebsd-bugs).  Apparently it only
> shows up on certain chipsets (VIA based).  I tried several other PS/2
> mice, to no avail (same outcome).  My system is running a day old
> -current build, but this other fellow reported the problem in 5.0 (does
> not affect 4.x).  I'm wondering if anyone else has experienced this
> problem, and if so, are there any work-arounds?  I've attached my
> 'dmesg' output, in the hopes that the information will be of value.
> Thank you in advance!
> 

Does disabling acpi make your mouse working?

> URL:
> http://lists.freebsd.org/pipermail/freebsd-bugs/2003-April/000426.html
> 
>                                     -Mike Bohan
> 
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
> reserved.
> FreeBSD 5.1-CURRENT #3: Fri Aug  8 09:10:54 EDT 2003
>     root_at_censored:/usr/obj/usr/src/sys/CABOOSE
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0424000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0424244.
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: AMD Athlon(tm) processor (1333.91-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
>  
>
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
>   AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
> real memory  = 268369920 (255 MB)
> avail memory = 256196608 (244 MB)
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <VIA694 AWRDACPI> on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 8 entries at 0xc00fdef0
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-fast"  frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port
> 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: slot 8 INTA is routed to irq 10
> pcib0: slot 9 INTA is routed to irq 5
> pcib0: slot 11 INTA is routed to irq 10
> agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
> device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib0: slot 1 INTA is routed to irq 11
> pcib1: slot 0 INTA is routed to irq 11
> pci1: <display, VGA> at device 0.0 (no driver attached)
> dc0: <ADMtek AN985 10/100BaseTX> port 0xd000-0xd0ff mem
> 0xef000000-0xef0003ff irq 10 at device 8.0 on pci0
> dc0: Ethernet address: 00:04:5a:40:b5:0d
> miibus0: <MII bus> on dc0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> dc1: <LC82C115 PNIC II 10/100BaseTX> port 0xd400-0xd4ff mem
> 0xef001000-0xef0010ff irq 5 at device 9.0 on pci0
> dc1: Ethernet address: 00:a0:cc:34:54:93
> miibus1: <MII bus> on dc1
> dcphy0: <Intel 21143 NWAY media interface> on miibus1
> dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> dc2: <82c169 PNIC 10/100BaseTX> port 0xd800-0xd8ff mem
> 0xef002000-0xef0020ff irq 10 at device 11.0 on pci0
> dc2: Ethernet address: 00:a0:cc:d6:ea:b4
> miibus2: <MII bus> on dc2
> bmtphy0: <BCM5201 10/100baseTX PHY> on miibus2
> bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI-ISA bridge> at device 17.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 8233A UDMA133 controller> port 0xdc00-0xdc0f at device
> 17.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> Timecounter "TSC"  frequency 1333905046 Hz
> Timecounters tick every 1.000 msec
> DUMMYNET initialized (011031)
> ipfw2 initialized, divert disabled, rule-based forwarding enabled,
> default to accept, logging disabled
> IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
> acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
> ad0: 39083MB <Maxtor 5T040H4> [79408/16/63] at ata0-master UDMA100
> ad1: 29333MB <WDC WD307AA> [59598/16/63] at ata0-slave UDMA66
> ad2: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-master UDMA100
> ad3: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-slave UDMA100
> Mounting root from ufs:/dev/ad0s1a
> 
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"


__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com