Something has changed during last week because my Fxtv stopped working in DGA mode. I'm back running old kernel so any clues what might cause this? Tomppa FreeBSD 5.1-CURRENT #3: Sun Aug 10 00:57:18 EEST 2003 FreeBSD 5.1-CURRENT #4: Sat Aug 16 21:17:19 EEST 2003 ***clip clip*** Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #3: Sun Aug 10 00:57:18 EEST 2003 tomppa_at_cat.bert.sun.fi:/u/F/local/sup/5.0/sys/i386/compile/CAT acpi_alloc_wakeup_handler: unable to allocate wake memory Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc053a000. Calibrating clock(s) ... i8254 clock: 1193190 Hz Timecounter "i8254" frequency 1193190 Hz Calibrating TSC clock ... TSC clock: 400913881 Hz CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x653 Stepping = 3 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 536805376 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000564000 - 0x000000001f6b1fff, 521461760 bytes (127310 pages) avail memory = 514416640 (490 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 bios32: Found BIOS32 Service Directory header at 0xc00fdb60 bios32: Entry = 0xfdb70 (c00fdb70) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb91 pnpbios: Found PnP BIOS data at 0xc00f7a30 pnpbios: Entry = f0000:74be Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff acpi0: <AMIINT > on motherboard ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 Timecounter "ACPI-safe" frequency 3579545 Hz AcpiOsDerivePciId: bus 0 dev 0 func 0 ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x440-0x44f,0x400-0x43f,0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) IOAPIC #0 intpin 19 -> irq 2 Freeing (NOT implemented) redirected PCI irq 10. map[20]: type 4, range 32, base 0000d800, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=2 map[90]: type 4, range 32, base 00000440, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 1, range 32, base efffe000, size 12, enabled found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=9, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 4, range 32, base 0000dc00, size 8, enabled map[14]: type 1, range 32, base effff000, size 12, enabled found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=9, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=b, irq=16 powerspec 1 supports D0 D3 current D0 Freeing (NOT implemented) redirected PCI irq 9. map[10]: type 3, range 32, base ed9ff000, size 12, enabled map[14]: type 4, range 32, base 0000d000, size 5, enabled map[18]: type 1, range 32, base efe00000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x05 bus=0, slot=14, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=17 powerspec 1 supports D0 D1 D2 D3 current D0 Freeing (NOT implemented) redirected PCI irq 5. map[10]: type 4, range 32, base 0000cc00, size 6, enabled found-> vendor=0x1274, dev=0x5000, revid=0x00 bus=0, slot=15, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=18 Freeing (NOT implemented) redirected PCI irq 10. map[10]: type 3, range 32, base ed9fe000, size 12, enabled found-> vendor=0x109e, dev=0x0350, revid=0x11 bus=0, slot=16, func=0 class=04-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=2 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xeda00000-0xefafffff pcib1: prefetched decode 0xe3800000-0xe58fffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 1, range 32, base ee000000, size 24, enabled map[14]: type 3, range 32, base e4000000, size 24, enabled found-> vendor=0x10de, dev=0x0020, revid=0x04 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=7f ostat2=50 ata1-master: ATAPI 7f 7f ata1-slave: ATAPI 14 eb ata1: after reset mask=03 stat0=7f stat1=10 ata1-master: ATA 7f 7f ata1: devices=08 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 7.2 (no driver attached) intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 440 intpm0: intr IRQ 9 enabled revision 0 intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 intpm0: PM I/O mapped 400 ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xefffe000-0xefffefff irq 16 at device 9.0 on pci0 ahc0: Defaulting to MEMIO on ahc0: Reading SEEPROM...done. ahc0: Low byte termination Enabled ahc0: High byte termination Enabled ahc0: Downloading Sequencer Program... 412 instructions downloaded ahc0: Features 0x16235, Bugs 0x15, Flags 0x20485540 aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xeffff000-0xefffffff irq 16 at device 9.1 on pci0 ahc1: Defaulting to MEMIO on ahc1: Reading SEEPROM...done. ahc1: Low byte termination Enabled ahc1: High byte termination Enabled ahc1: Downloading Sequencer Program... 412 instructions downloaded ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485540 aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82558 Pro/100 Ethernet> port 0xd000-0xd01f mem 0xefe00000-0xefefffff,0xed9ff000-0xed9fffff irq 17 at device 14.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:90:27:34:2a:54 fxp0: PCI IDs: 8086 1229 8086 0009 0005 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached pcm0: <AudioPCI ES1370> port 0xcc00-0xcc3f irq 18 at device 15.0 on pci0 pcm0: sndbuf_setmap 859000, 1000; 0xc1c85000 -> 859000 pcm0: sndbuf_setmap 857000, 1000; 0xc1c83000 -> 857000 bktr0: <BrookTree 848> mem 0xed9fe000-0xed9fefff irq 2 at device 16.0 on pci0 brooktree0: PCI bus latency is 64. bktr0: buffer size 3555328, addr 0x5000000 bktr0: GPIO is 0x00fffffb bktr0: Hauppauge Model 56304 D bktr0: Hauppauge WinCast/TV, Temic PAL tuner. mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bbb9a0), AE_AML_REGION_LIMIT psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0-51, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:08, syncbits:08 fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 sio0: irq maps: 0x8001 0x8011 0x8001 0x8001 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x8001 0x8009 0x8001 0x8001 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) npx0: <math processor> on motherboard npx0: INT 16 interface atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices SMP: enabled INTs: 1, 2, 3, 4, 6, 7, 9, 12, 14, 15, 16, 17, 18, apic_imen: 0xfff82d21 Device configuration finished. procfs registered APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounter "TSC" frequency 400913881 Hz Timecounters tick every 10.000 msec lo0: bpf attached ad0: success setting UDMA33 on Intel PIIX4 chip ad0: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata0-master ad0: 9671MB (19807200 sectors), 19650 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=12 dmamode=34 udmamode=66 cblid=0 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1 ata1-slave: success setting PIO4 on Intel PIIX4 chip acd0: <LTN362/VL22> CDROM drive at ata1 as slave acd0: read 6201KB/s (51523KB/s), 120KB buffer, PIO4 acd0: Reads: CD-DA acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 8 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. [0] f:80 typ:6 s(CHS):0/1/1 e(CHS):12/254/63 s:63 l:208782 [1] f:00 typ:15 s(CHS):13/0/1 e(CHS):1023/254/63 s:208845 l:19567170 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 106896384 end 106928639 GEOM: Configure ad0s2, start 106928640 length 10018391040 end 10125319679 MBREXT Slice 5 on ad0s2: [0] f:00 typ:7 s(CHS):13/1/1 e(CHS):1023/254/63 s:63 l:19567107 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s5, start 32256 length 10018358784 end 10018391039 (probe15:ahc1:0:0:0): Retrying Command (probe21:ahc1:0:6:0): error 22 (probe21:ahc1:0:6:0): Unretryable Error (ahc1:A:6:0): Sending SDTR period 2b, offset f (ahc1:A:6:0): Received SDTR period 2b, offset f Filtered to period 2b, offset f ahc1: target 6 synchronous at 5.7MHz, offset = 0xf (ahc1:A:0:0): Sending SDTR period 2b, offset f (ahc1:A:0:0): Received SDTR period 2b, offset f Filtered to period 2b, offset f ahc1: target 0 synchronous at 5.7MHz, offset = 0xf (ahc1:A:6:0): Sending SDTR period 2b, offset f (ahc1:A:6:0): Received SDTR period 2b, offset f Filtered to period 2b, offset f (probe0:ahc0:0:0:0): Retrying Command (ahc0:A:0:0): Sending WDTR 1 (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers (ahc0:A:0:0): Sending SDTR period 2b, offset 8 (ahc0:A:0:0): Received SDTR period 2b, offset 8 Filtered to period 2b, offset 8 ahc0: target 0 synchronous at 5.7MHz, offset = 0x8 pass0 at ahc0 bus 0 target 0 lun 0 pass0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device pass0: Serial Number 3CE02QL50000704409EM pass0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at ahc1 bus 0 target 0 lun 0 pass1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device pass1: Serial Number RD3C8551 pass1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled pass2 at ahc1 bus 0 target 6 lun 0 pass2: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device pass2: 5.813MB/s transfers (5.813MHz, offset 15) da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device da0: Serial Number 3CE02QL50000704409EM da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) (ahc1:A:6:0): Sending SDTR period 2b, offset f GEOM: new disk da0 GEOM: new disk da1(ahc1:A:6:0): Received SDTR period 2b, offset f Filtered to period 2b, offset f SMP: AP CPU #1 Launched! SMP: CPU1 ap_init(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff (cd0:ahc1:0:6:0): Retrying Command [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:143363997 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 73402366464 end 73402398719 da1 at ahc1 bus 0 target 0 lun 0 da1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device da1: Serial Number RD3C8551 da1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):554/254/63 s:63 l:8916012 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da1s1, start 32256 length 4564998144 end 4565030399 GEOM: Configure da0s1a, start 0 length 1073741824 end 1073741823 GEOM: Configure da0s1b, start 1073741824 length 1073741824 end 2147483647 GEOM: Configure da0s1c, start 0 length 73402366464 end 73402366463 GEOM: Configure da0s1d, start 2147483648 length 71254882816 end 73402366463 GEOM: Configure da1s1a, start 268435456 length 402653184 end 671088639 GEOM: Configure da1s1b, start 0 length 268435456 end 268435455 GEOM: Configure da1s1c, start 0 length 4564998144 end 4564998143 GEOM: Configure da1s1e, start 671088640 length 3893909504 end 4564998143 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd800-0xd81f irq 2 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered (da0:ahc0:0:0:0): Queue Full (da0:ahc0:0:0:0): tagged openings now 64 (da0:ahc0:0:0:0): Retrying Command (cd0:ahc1:0:6:0): error 6 (cd0:ahc1:0:6:0): Unretryable Error cd0 at ahc1 bus 0 target 6 lun 0 cd0: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device cd0: 5.813MB/s transfers (5.813MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present ***clip clip*** Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #4: Sat Aug 16 21:17:19 EEST 2003 tomppa_at_cat.bert.sun.fi:/u/F/local/sup/5.0/sys/i386/compile/CAT acpi_alloc_wakeup_handler: unable to allocate wake memory Preloaded elf kernel "/boot/kernel/kernel" at 0xc0648000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc0648244. Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0648294. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0648344. Preloaded splash_image_data "/boot/splash.bmp" at 0xc06483f0. Preloaded elf module "/boot/kernel/usb.ko" at 0xc0648440. Preloaded elf module "/boot/kernel/ums.ko" at 0xc06484e8. Preloaded elf module "/boot/kernel/random.ko" at 0xc0648590. Calibrating clock(s) ... i8254 clock: 1193187 Hz Timecounter "i8254" frequency 1193187 Hz quality 0 Calibrating TSC clock ... TSC clock: 400912544 Hz CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x653 Stepping = 3 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 536805376 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000672000 - 0x000000001f6b1fff, 520355840 bytes (127040 pages) avail memory = 513290240 (489 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 bios32: Found BIOS32 Service Directory header at 0xc00fdb60 bios32: Entry = 0xfdb70 (c00fdb70) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb91 pnpbios: Found PnP BIOS data at 0xc00f7a30 pnpbios: Entry = f0000:74be Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 40 00 04 02 07 01 00 01 0e 01 00 01 17 01 00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01 07 01 08 01 09 01 0a 01 0b 01 0c 01 0e 01 0f 01 VESA: 33 mode(s) found VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0541c82 (1000022) VESA: NVidia VESA: NVidia Riva TNT A5 random: <entropy source> splash: image_at_0xc0542e60, size:787506 splash_bmp: beyond screen capacity (1024x768, 255 colors) splash_bmp: beyond screen capacity (1024x768, 255 colors) bmp_start(): splash_mode:261 splash: image decoder found: splash_bmp SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff acpi0: <AMIINT > on motherboard ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x440-0x44f,0x400-0x43f,0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) IOAPIC #0 intpin 19 -> irq 2 Freeing (NOT implemented) redirected PCI irq 10. map[20]: type 4, range 32, base 0000d800, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=2 map[90]: type 4, range 32, base 00000440, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 1, range 32, base efffe000, size 12, enabled found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=9, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 4, range 32, base 0000dc00, size 8, enabled map[14]: type 1, range 32, base effff000, size 12, enabled found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=9, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=b, irq=16 powerspec 1 supports D0 D3 current D0 Freeing (NOT implemented) redirected PCI irq 9. map[10]: type 3, range 32, base ed9ff000, size 12, enabled map[14]: type 4, range 32, base 0000d000, size 5, enabled map[18]: type 1, range 32, base efe00000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x05 bus=0, slot=14, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=17 powerspec 1 supports D0 D1 D2 D3 current D0 Freeing (NOT implemented) redirected PCI irq 5. map[10]: type 4, range 32, base 0000cc00, size 6, enabled found-> vendor=0x1274, dev=0x5000, revid=0x00 bus=0, slot=15, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=18 Freeing (NOT implemented) redirected PCI irq 10. map[10]: type 3, range 32, base ed9fe000, size 12, enabled found-> vendor=0x109e, dev=0x0350, revid=0x11 bus=0, slot=16, func=0 class=04-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=2 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xeda00000-0xefafffff pcib1: prefetched decode 0xe3800000-0xe58fffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 1, range 32, base ee000000, size 24, enabled map[14]: type 3, range 32, base e4000000, size 24, enabled found-> vendor=0x10de, dev=0x0020, revid=0x04 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=7f ostat2=50 ata1-master: ATAPI 7f 7f ata1-slave: ATAPI 14 eb ata1: after reset mask=03 stat0=7f stat1=10 ata1-master: ATA 7f 7f ata1: devices=08 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd800-0xd81f irq 2 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 440 intpm0: intr IRQ 9 enabled revision 0 intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 intpm0: PM I/O mapped 400 ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xefffe000-0xefffefff irq 16 at device 9.0 on pci0 ahc0: Defaulting to MEMIO on ahc0: Reading SEEPROM...done. ahc0: Low byte termination Enabled ahc0: High byte termination Enabled ahc0: Downloading Sequencer Program... 412 instructions downloaded ahc0: Features 0x16235, Bugs 0x15, Flags 0x20485540 aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xeffff000-0xefffffff irq 16 at device 9.1 on pci0 ahc1: Defaulting to MEMIO on ahc1: Reading SEEPROM...done. ahc1: Low byte termination Enabled ahc1: High byte termination Enabled ahc1: Downloading Sequencer Program... 412 instructions downloaded ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485540 aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82558 Pro/100 Ethernet> port 0xd000-0xd01f mem 0xefe00000-0xefefffff,0xed9ff000-0xed9fffff irq 17 at device 14.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:90:27:34:2a:54 fxp0: PCI IDs: 8086 1229 8086 0009 0005 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached pcm0: <AudioPCI ES1370> port 0xcc00-0xcc3f irq 18 at device 15.0 on pci0 pcm0: sndbuf_setmap 992000, 1000; 0xc1c9e000 -> 992000 pcm0: sndbuf_setmap 990000, 1000; 0xc1c9c000 -> 990000 bktr0: <BrookTree 848> mem 0xed9fe000-0xed9fefff irq 2 at device 16.0 on pci0 brooktree0: PCI bus latency is 64. bktr0: buffer size 3555328, addr 0x5000000 bktr0: GPIO is 0x00fffffb bktr0: Hauppauge Model 56304 D bktr0: Hauppauge WinCast/TV, Temic PAL tuner. mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.NRTH.SBRG.PS2M._STA] (Node 0xc1bb3920), AE_AML_REGION_LIMIT psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0-51, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:08, syncbits:08 fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 sio0: irq maps: 0x8001 0x8011 0x8001 0x8001 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x8001 0x8009 0x8001 0x8001 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) npx0: <math processor> on motherboard npx0: INT 16 interface atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:261 fb0: window:0xda33b000 size:4096k gran:4096k, buf:0xda33b000 size:4096k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices SMP: enabled INTs: 1, 2, 3, 4, 6, 7, 9, 12, 14, 15, 16, 17, 18, apic_imen: 0xfff82d21 Device configuration finished. procfs registered APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounter "TSC" frequency 400912544 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached ad0: success setting UDMA33 on Intel PIIX4 chip ad0: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata0-master ad0: 9671MB (19807200 sectors), 19650 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=12 dmamode=34 udmamode=66 cblid=0 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1 ata1-slave: success setting PIO4 on Intel PIIX4 chip acd0: <LTN362/VL22> CDROM drive at ata1 as slave acd0: read 6201KB/s (51523KB/s), 120KB buffer, PIO4 acd0: Reads: CD-DA acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 8 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. [0] f:80 typ:6 s(CHS):0/1/1 e(CHS):12/254/63 s:63 l:208782 [1] f:00 typ:15 s(CHS):13/0/1 e(CHS):1023/254/63 s:208845 l:19567170 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 106896384 end 106928639 GEOM: Configure ad0s2, start 106928640 length 10018391040 end 10125319679 MBREXT Slice 5 on ad0s2: [0] f:00 typ:7 s(CHS):13/1/1 e(CHS):1023/254/63 s:63 l:19567107 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s5, start 32256 length 10018358784 end 10018391039 (probe15:ahc1:0:0:0): Retrying Command (probe21:ahc1:0:6:0): error 22 (probe21:ahc1:0:6:0): Unretryable Error (ahc1:A:6:0): Sending SDTR period 2b, offset f (ahc1:A:6:0): Received SDTR period 2b, offset f Filtered to period 2b, offset f ahc1: target 6 synchronous at 5.7MHz, offset = 0xf (ahc1:A:6:0): Sending SDTR period 2b, offset f (ahc1:A:6:0): Received SDTR period 2b, offset f Filtered to period 2b, offset f (probe0:ahc0:0:0:0): Retrying Command (ahc0:A:0:0): Sending WDTR 1 (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers ahc0: target 0 synchronous at 5.7MHz, offset = 0x8 pass0 at ahc0 bus 0 target 0 lun 0 pass0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device pass0: Serial Number 3CE02QL50000704409EM pass0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at ahc1 bus 0 target 0 lun 0 pass1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device pass1: Serial Number RD3C8551 pass1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled pass2 at ahc1 bus 0 target 6 lun 0 pass2: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device pass2: 5.813MB/s transfers (5.813MHz, offset 15) da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST173404LW 0003> Fixed Direct Access SCSI-3 device da0: Serial Number 3CE02QL50000704409EM da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) GEOM: new disk da0 GEOM: new disk da1 SMP: AP CPU #1 Launched! SMP: CPU1 ap_init(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff (cd0:ahc1:0:6:0): Retrying Command [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:143363997 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 73402366464 end 73402398719 da1 at ahc1 bus 0 target 0 lun 0 da1: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device da1: Serial Number RD3C8551 da1: 5.813MB/s transfers (5.813MHz, offset 15), Tagged Queueing Enabled da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):554/254/63 s:63 l:8916012 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da1s1, start 32256 length 4564998144 end 4565030399 GEOM: Configure da0s1a, start 0 length 1073741824 end 1073741823 GEOM: Configure da0s1b, start 1073741824 length 1073741824 end 2147483647 GEOM: Configure da0s1c, start 0 length 73402366464 end 73402366463 GEOM: Configure da0s1d, start 2147483648 length 71254882816 end 73402366463 GEOM: Configure da1s1a, start 268435456 length 402653184 end 671088639 GEOM: Configure da1s1b, start 0 length 268435456 end 268435455 GEOM: Configure da1s1c, start 0 length 4564998144 end 4564998143 GEOM: Configure da1s1e, start 671088640 length 3893909504 end 4564998143 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered (cd0:ahc1:0:6:0): error 6 (cd0:ahc1:0:6:0): Unretryable Error cd0 at ahc1 bus 0 target 6 lun 0 cd0: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device cd0: 5.813MB/s transfers (5.813MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not presentReceived on Sat Aug 16 2003 - 11:49:14 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:19 UTC