RE: HTT on current

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Fri Aug 22 15:41:01 EDT 2003
    root_at_newns.trigger.net:/usr/obj/usr/src/sys/NS1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc042d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc042d244.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1072889856 (1023 MB)
avail memory = 1037774848 (989 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL  S875PWP1> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f3310
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 9
pcib0: slot 29 INTB is routed to irq 12
pcib0: slot 29 INTC is routed to irq 5
pcib0: slot 29 INTA is routed to irq 9
pcib0: slot 31 INTB is routed to irq 9
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 1 INTA is routed to irq 5
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.6.6> port
0xbc00-0xbc1f mem 0xfc9e0000-0xfc9fffff irq 5 at device 1.0 on pci2
em0:  Speed:N/A  Duplex:N/A
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib3: slot 0 INTA is routed to irq 10
pcib3: slot 6 INTA is routed to irq 11
ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xc400-0xc4ff mem
0xfeafe000-0xfeafefff irq 10 at device 0.0 on pci3
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci3: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2394011780 Hz quality 800
Timecounters tick every 10.000 msec
Waiting 3 seconds for SCSI devices to settle
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
da0 at ahc0 bus 0 target 0 lun 0
da0: <MAXTOR ATLAS10K4_36WLS DFL0> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
Mounting root from ufs:/dev/da0s1a
em0: Link is up 100 Mbps Full Duplex

> -----Original Message-----
> From: owner-freebsd-current_at_freebsd.org
> [mailto:owner-freebsd-current_at_freebsd.org]On Behalf Of Kenneth Culver
> Sent: Friday, August 22, 2003 4:33 PM
> To: Mike Jakubik
> Cc: current_at_freebsd.org
> Subject: Re: HTT on current
>
>
> > Hi,
> >
> > 	I have a HTT capabale PCU on an Intel MB with the 875P
> chipset. I have
> > enabled HTT in the BIOS and compiled my kernel with the required SMP
> > options, however i dont think the system is really running in
> SMP mode. Top
> > does not display CPU numbers. Here is my dmesg:
> >
> > ---
> >
> > FreeBSD 5.1-CURRENT #0: Fri Aug 22 15:41:01 EDT 2003
> >
> > CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
> >
> >
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MT
> RR,PGE,MCA
> > ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> >   Hyperthreading: 2 logical CPUs
> > real memory  = 1072889856 (1023 MB)
> > avail memory = 1037774848 (989 MB)
> > Pentium Pro MTRR support enabled
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > acpi0: <INTEL  S875PWP1> on motherboard
> > pcibios: BIOS version 2.10
> > Using $PIR table, 12 entries at 0xc00f3310
> > acpi0: power button is handled as a fixed feature programming model.
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> > acpi_cpu0: <CPU> on acpi0
> > acpi_cpu1: <CPU> on acpi0
> >
> > ---
> >
> Where's the rest of your dmesg?
>
> Ken
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>