Re: ATAng related panic

Sir,

I noticed in your dmesg that you have hyperthreading support on a 3 ghz p4 
like mine.  Could you email me and/or post your kernel config file and/or 
whatever else you did to get this to compile and work.  Please!!!!

dave


On Monday 25 August 2003 01:06 am, Shin-ichi Yoshimoto wrote:
> Subject: Re: ATAng related panic,
>
> On Mon, 25 Aug 2003 08:59:44 +0200 (CEST), Soren Schmidt wrote:
> > OK, could you mail me your dmesg please ?
>
> OK, following:
>
> /boot/kernel/acpi.ko text=0x393bc data=0x170c+0xec0
> syms=[0x4+0x5b90+0x4+0x79ee] Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.1-CURRENT #49: Mon Aug 25 08:42:22 JST 2003
>     yosimoto_at_daemon.kek.jp:/usr/obj/usr/src/sys/DAEMON
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc051b000.
> Preloaded elf module "/boot/kernel/linux.ko" at 0xc051b244.
> Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc051b2f0.
> Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc051b39c.
> Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc051b448.
> Preloaded elf module "/boot/kernel/radeon.ko" at 0xc051b4f4.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc051b5a0.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>  
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
>A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory  = 1072889856 (1023 MB)
> avail memory = 1036828672 (988 MB)
> Programming 24 pins in IOAPIC #0
> IOAPIC #0 intpin 2 -> irq 0
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
>  cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
>  io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <INTEL  D865PERL> on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 12 entries at 0xc00f3310
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> IOAPIC #0 intpin 16 -> irq 2
> IOAPIC #0 intpin 19 -> irq 16
> IOAPIC #0 intpin 18 -> irq 17
> IOAPIC #0 intpin 23 -> irq 18
> IOAPIC #0 intpin 17 -> irq 19
> agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device
> 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> drm0: <ATI Radeon If R250 9000> port 0xa800-0xa8ff mem
> 0xff7f0000-0xff7fffff,0xf0000000-0xf3ffffff irq 2 at device 0.0 on pci1
> info: [drm] AGP at 0xf8000000 64MB
> info: [drm] Initialized radeon 1.9.0 20020828 on minor 0
> pci1: <display> at device 0.1 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.6.6> port
> 0xbc00-0xbc1f mem 0xff8e0000-0xff8fffff irq 17 at device 1.0 on pci2 em0: 
> Speed:N/A  Duplex:N/A
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 2
> at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on
> uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq
> 16 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B>
> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq
> 17 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C>
> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 2
> at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on
> uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffaffc00-0xffafffff irq 18
> at device 29.7 on pci0 ehci_pci_attach: companion usb0
> ehci_pci_attach: companion usb1
> ehci_pci_attach: companion usb2
> ehci_pci_attach: companion usb3
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> fwohci0: <Lucent FW322/323> mem 0xff9ff000-0xff9fffff irq 19 at device 7.0
> on pci3 fwohci0: OHCI version 1.0 (ROM=0)
> fwohci0: No. of Isochronous channel is 8.
> fwohci0: EUI64 00:07:e9:00:00:70:f9:c4
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> sbp0: <SBP2/SCSI over firewire> on firewire0
> if_fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:07:e9:70:f9:c4
> fwohci0: Initiate bus reset
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port
> 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 irq 17 at device 31.1 on pci0 ata0:
> at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> atapci1: <Intel ICH5 SATA150 controller> port
> 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq
> 17 at device 31.2 on pci0 ata2: at 0xec00 on atapci1
> ata3: at 0xe400 on atapci1
> ichsmb0: <SMBus controller> port 0xc800-0xc81f irq 19 at device 31.3 on
> pci0 pcm0: <Intel ICH5 (82801EB)> mem
> 0xffaff400-0xffaff4ff,0xffaff800-0xffaff9ff irq 19 at device 31.5 on pci0
> pcm0: <Analog Devices AD1985 AC97 Codec>
> acpi_button0: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO
> enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A, console
> ppc0 port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> APIC_IO: Testing 8254 interrupt delivery
> APIC_IO: routing 8254 via IOAPIC #0 intpin 2
>
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert disabled, rule-based forwarding enabled, default
> to deny, logging limited to 5000 packets/entry by default acpi_cpu:
> throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: DVDR
> <MATSHITADVD-RAM LF-D521> at ata1-master UDMA66
> em0: Link is up 100 Mbps Full Duplex
> ad4: 239372MB <Maxtor 7Y250M0> [486344/16/63] at ata2-master UDMA133
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/ad4s1a