-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 After a cold boot with ATAng it can't seem to properly detect my drives and just stays stuck while booting the kernel. The last line that it displays on a boot -v: ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin I'm not sure how to get more debug info with the kernel just staying stuck there, let me know what I need to do. - -- dmesg --- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #9: Tue Aug 26 21:12:34 EDT 2003 amistry_at_littleguy.am-productions.biz:/usr/obj/usr/src/sys/LITTLEGUY Preloaded elf kernel "/boot/kernel/kernel" at 0xc0415000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0415244. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (816.37-MHz 586-class CPU) Origin = "GenuineTMx86" Id = 0x543 real memory = 251527168 (239 MB) avail memory = 239788032 (228 MB) npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <FUJ PAULING2> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0 acpi_cpu0: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTA is routed to irq 11 pcib0: slot 4 INTA is routed to irq 9 pcib0: slot 12 INTA is routed to irq 9 pcib0: slot 16 INTA is routed to irq 9 pcib0: slot 19 INTA is routed to irq 9 pcib0: slot 20 INTA is routed to irq 9 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <serial bus, USB> at device 2.0 (no driver attached) pci0: <multimedia, audio> at device 4.0 (no driver attached) pci0: <bridge, PCI-unknown> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <bridge, PCI-CardBus> at device 12.0 (no driver attached) atapci0: <AcerLabs Aladdin UDMA66 controller> port 0x1400-0x140f at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 rl0: <RealTek 8139 10/100BaseTX, rev. C> port 0x8000-0x80ff mem 0xfc102000-0xfc1020ff irq 9 at device 16.0 on pci0 rl0: Ethernet address: 00:e0:00:ae:45:08 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <serial bus, FireWire> at device 19.0 (no driver attached) pci0: <display, VGA> at device 20.0 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: <embedded controller: GPE 0> port 0x66,0x62 on acpi0 orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 816368614 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA66 acd0: CDRW <TOSHIBA DVD-ROM SD-R2212> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s2a acpi_cmbat1: battery initialization failed, giving up acd0: WARNING - READ_CD recovered from missing interrupt acd0: WARNING - READ_CD UDMA ICRC error (retrying request) - --- pciconfi -lv --- hostb0_at_pci0:0:0: class=0x060000 card=0x110e10cf chip=0x03951279 rev=0x02 hdr=0x00 vendor = 'Transmeta Corp.' device = 'LongRun Northbridge' class = bridge subclass = HOST-PCI none0_at_pci0:0:1: class=0x050000 card=0x110e10cf chip=0x03961279 rev=0x00 hdr=0x00 vendor = 'Transmeta Corp.' device = 'SDRAM Controller' class = memory subclass = RAM none1_at_pci0:0:2: class=0x050000 card=0x110e10cf chip=0x03971279 rev=0x00 hdr=0x00 vendor = 'Transmeta Corp.' device = 'BIOS scratchpad' class = memory subclass = RAM none2_at_pci0:2:0: class=0x0c0310 card=0x10a210cf chip=0x523710b9 rev=0x03 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M5237 USB Host Controller' class = serial bus subclass = USB none3_at_pci0:4:0: class=0x040100 card=0x112f10cf chip=0x545110b9 rev=0x01 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M5451 PCI AC-Link Controller Audio Device' class = multimedia subclass = audio none4_at_pci0:6:0: class=0x068000 card=0x10a310cf chip=0x710110b9 rev=0x00 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M7101 Power Management Controller' class = bridge subclass = PCI-unknown isab0_at_pci0:7:0: class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'ALI M1533 Aladdin IV ISA Bridge' class = bridge subclass = PCI-ISA none5_at_pci0:12:0: class=0x060700 card=0x10c610cf chip=0xac50104c rev=0x01 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1410 PC card cardBus Controller' class = bridge subclass = PCI-CardBus atapci0_at_pci0:15:0: class=0x0101fa card=0x10a410cf chip=0x522910b9 rev=0xc3 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi)' device = 'M1543 Southbridge EIDE Controller' class = mass storage subclass = ATA rl0_at_pci0:16:0: class=0x020000 card=0x111c10cf chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter' class = network subclass = ethernet none6_at_pci0:19:0: class=0x0c0010 card=0x116210cf chip=0x8026104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller' class = serial bus subclass = FireWire none7_at_pci0:20:0: class=0x030000 card=0x114f10cf chip=0x4c521002 rev=0x64 hdr=0x00 vendor = 'ATI Technologies' device = 'Rage P/M Mobility PCI' class = display subclass = VGA - -- Anish Mistry -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (FreeBSD) iD8DBQE/TCa0xqA5ziudZT0RAjQZAJ9im8fsjpIsNUb/kJY9SGw3KiT5jQCg4JU0 /D1GvOM8UP4IzPw/7mkHXNA= =H4kl -----END PGP SIGNATURE-----Received on Tue Aug 26 2003 - 18:33:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:20 UTC