My first try with ATAng on -CURRENT as of 18 hours ago ended up dying around reboot. Other than this, it seems to work as expected. I don't have WITNESS or INVARIANTS on this box, but I can recompile kernel with them if it helps. # reboot Aug 28 09:24:35 rms21 reboot: rebooted by root boot() called on cpu#0 Waiting (max 60 seconds) for system process `vnlru' to stop...stopped *** HANGS HERE***, I go over and powercycle... ąCopyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #6: Thu Aug 28 08:31:37 EEST 2003 CPU: Intel Pentium III (568.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 536805376 (511 MB) avail memory = 515559424 (491 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000 atapci0: <VIA 82C686B UDMA100 controller> port 0xc000-0xc00f at device 7.1 on pc i0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 atapci1: <HighPoint HPT370 UDMA100 controller> port 0xe400-0xe4ff,0xe000-0xe003, 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 irq 11 at device 14.0 on pci0 ata2: at 0xd400 on atapci1 ata3: at 0xdc00 on atapci1 ad0: 9541MB <Maxtor 31024H2> [19386/16/63] at ata0-master UDMA100 ad3: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata1-slave UDMA100 PeteReceived on Thu Aug 28 2003 - 06:06:26 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:20 UTC