I rebooted my notebook to freebsd and was thinking how to save log file if kernel doesn't boot ... and strange thing happened kernel booted up no hang. ( after I rebooted 3 times more - hanging in same place like before ). So I think I just got lucky to save dmesg without headache ... and here it is ( sorry if posting verbose dmesg on the list is bad idea :/ ) . The last lines what I saw when kernel lockups is: acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times cbb0: Unsupported card type detected <here finish> Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Fri Aug 29 06:29:49 EET 2003 root_at_pilkisnote.spo-tripoli.local:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0752000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0752294. Calibrating clock(s) ... i8254 clock: 1193189 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1193108906 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1193.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR,SSE> real memory = 536346624 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000779000 - 0x000000001f5d3fff, 518369280 bytes (126555 pages) 0x000000001ff00000 - 0x000000001ff77fff, 491520 bytes (120 pages) avail memory = 512958464 (489 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6d00 bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd870+0x13a pnpbios: Found PnP BIOS data at 0xc00f6d30 pnpbios: Entry = f0000:a456 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <SONY C0 > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 2 5 A 0x69 3 embedded 2 8 A 0x68 9 embedded 0 29 A 0x60 9 embedded 0 29 B 0x63 9 embedded 0 2 A 0x60 9 embedded 0 1 A 0x60 9 AcpiOsDerivePciId: bus 1 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 5 func 0 AcpiOsDerivePciId: bus 2 dev 5 func 1 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2 \\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1 ---- before setting priority for links ------------ \\_SB_.LNKB: interrupts: 9 penalty: 1050 references: 2 priority: 0 \\_SB_.LNKC: interrupts: 9 penalty: 1050 references: 2 priority: 0 \\_SB_.LNKH: interrupts: 9 penalty: 1050 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKB: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKC: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKH: interrupts: 9 penalty: 1050 references: 1 priority: 1050 ---- after fixup boot-disabled links -------------- \\_SB_.LNKB: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKC: interrupts: 9 penalty: 1050 references: 2 priority: 2100 \\_SB_.LNKH: interrupts: 9 penalty: 1050 references: 1 priority: 1050 ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.1.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.29.2 \\_SB_.LNKH irq 0: [ 9] low,level,sharable 0.29.3 \\_SB_.LNKB irq 0: [ 9] low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x8086, dev=0x3575, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3576, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 9 found-> vendor=0x8086, dev=0x2482, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2484, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type 4, range 32, base 00001840, size 5, enabled found-> vendor=0x8086, dev=0x2487, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 found-> vendor=0x8086, dev=0x2448, revid=0x41 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled map[24]: type 1, range 32, base d0000000, size 10, memory disabled found-> vendor=0x8086, dev=0x248a, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled found-> vendor=0x8086, dev=0x2483, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[10]: type 4, range 32, base 00001c00, size 8, port disabled map[14]: type 4, range 32, base 000018c0, size 6, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: possible interrupts: 9 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x2485, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[10]: type 4, range 32, base 00002400, size 8, port disabled map[14]: type 4, range 32, base 00002000, size 7, enabled found-> vendor=0x8086, dev=0x2486, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 228M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xd0100000-0xd01fffff pcib1: prefetched decode 0xd8000000-0xdfffffff ---- initial configuration ------------------------ \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0 ---- before setting priority for links ------------ \\_SB_.LNKB: interrupts: 9 penalty: 1150 references: 2 priority: 2100 \\_SB_.LNKC: interrupts: 9 penalty: 1150 references: 2 priority: 2100 \\_SB_.LNKH: interrupts: 9 penalty: 1150 references: 1 priority: 1050 ---- before fixup boot-disabled links ------------- \\_SB_.LNKB: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKC: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKH: interrupts: 9 penalty: 1150 references: 1 priority: 1150 ---- after fixup boot-disabled links -------------- \\_SB_.LNKB: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKC: interrupts: 9 penalty: 1150 references: 2 priority: 2300 \\_SB_.LNKH: interrupts: 9 penalty: 1150 references: 1 priority: 1150 ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d8000000, size 27, enabled map[14]: type 4, range 32, base 00003000, size 8, enabled map[18]: type 1, range 32, base d0100000, size 16, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 9 found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0 pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) pcib0: possible interrupts: 9 pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2 umass0:0:0:-1: Attached to scbus0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x4000-0x4fff pcib2: memory decode 0xd0200000-0xd02fffff pcib2: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0 \\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0 \\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1 \\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0 ---- before setting priority for links ------------ \\_SB_.LNKB: interrupts: 9 penalty: 1580 references: 2 priority: 2300 \\_SB_.LNKC: interrupts: 9 penalty: 1580 references: 3 priority: 2300 \\_SB_.LNKH: interrupts: 9 penalty: 1580 references: 1 priority: 1150 \\_SB_.LNKF: interrupts: 9 penalty: 1580 references: 1 priority: 0 \\_SB_.LNKG: interrupts: 9 penalty: 1580 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKC: interrupts: 9 penalty: 1580 references: 3 priority: 4740 \\_SB_.LNKB: interrupts: 9 penalty: 1580 references: 2 priority: 3160 \\_SB_.LNKH: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKF: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKG: interrupts: 9 penalty: 1580 references: 1 priority: 1580 ---- after fixup boot-disabled links -------------- \\_SB_.LNKC: interrupts: 9 penalty: 1580 references: 3 priority: 4740 \\_SB_.LNKB: interrupts: 9 penalty: 1580 references: 2 priority: 3160 \\_SB_.LNKH: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKF: interrupts: 9 penalty: 1580 references: 1 priority: 1580 \\_SB_.LNKG: interrupts: 9 penalty: 1580 references: 1 priority: 1580 ---- arbitrated configuration --------------------- \\_SB_.LNKC irq 0: [ 9] low,level,sharable 2.2.0 \\_SB_.LNKF irq 0: [ 9] low,level,sharable 2.5.0 \\_SB_.LNKG irq 0: [ 9] low,level,sharable 2.5.1 \\_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base d0205000, size 11, enabled map[14]: type 1, range 32, base d0200000, size 14, enabled found-> vendor=0x104c, dev=0x8021, revid=0x02 bus=2, slot=2, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D2 D3 current D0 pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKF) pcib2: possible interrupts: 9 pcib2: slot 5 INTA routed to irq 9 via \\_SB_.LNKF found-> vendor=0x1180, dev=0x0476, revid=0x80 bus=2, slot=5, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1180, dev=0x0476, revid=0x80 bus=2, slot=5, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0204000, size 12, enabled map[14]: type 4, range 32, base 00004000, size 6, enabled pcib2: matched entry for 2.8.INTA (source \\_SB_.LNKE) pcib2: slot 8 INTA is routed to irq 9 found-> vendor=0x8086, dev=0x1031, revid=0x41 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 fwohci0: <Texas Instruments TSB43AA22> mem 0xd0200000-0xd0203fff,0xd0205000-0xd02057ff at device 2.0 on pci2 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xd0205000-0xd02057ff pcib2: matched entry for 2.2.INTA (source \\_SB_.LNKC) pcib2: slot 2 INTA is routed to irq 9 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 08:00:46:03:00:d8:58:63 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: phy read failed(2). fwohci0: fwphy_rddata: 0x3 loop=0, retry=1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 0a:00:46:d8:58:63 fwe0: bpf attached sbp0: <SBP2/SCSI over firewire> on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 cbb0: <RF5C476 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xd0200000-0xd02fffff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x06070080 0x00824000 0x10: 0xd0200000 0x020000dc 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x04000109 0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00a20001 0x00000000 0x04630463 0x30000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <RF5C476 PCI-CardBus Bridge> at device 5.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xd0200000-0xd02fffff cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.5.INTB (source \\_SB_.LNKG) pcib2: possible interrupts: 9 pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG cbb1: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x06070080 0x00824000 0x10: 0xd0201000 0x020000dc 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x04000209 0x40: 0x80e7104d 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00a20001 0x00000000 0x04630463 0x30000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x80e7104d 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2 pcib2: device fxp0 requested decoded memory range 0xd0204000-0xd0204fff fxp0: using memory space register mapping fxp0: Ethernet address 08:00:46:43:83:a5 fxp0: PCI IDs: 8086 1031 104d 80e7 0041 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-slave: ATAPI 00 00 ata0-master: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=00 stat1=01 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: <embedded controller: GPE 0x1c> port 0x66,0x62 on acpi0 sio0: irq maps: 0x209 0x219 0x209 0x209 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lp0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_ec0: info: new max delay is 3 us acpi_ec0: info: new max delay is 4 us unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi_ec0: info: new max delay is 10 us ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x209 0x209 0x209 0x209 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f 98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f 98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1193108906 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 1f02c000 OUTL ST2 ALL ALL 12 00000000 1f02c080 8411:0009 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times cbb0: Unsupported card type detected cbb1: Unsupported card type detected ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA100 on Intel ICH3 chip ad0: <IC25N030ATDA04-0/DA4OA76A> ATA-5 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: setting PIO4 on Intel ICH3 chip acd0: <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N/0010> CDRW drive at ata1 as master acd0: read 1722KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/5/63 s:63 l:8385867 [1] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/11/63 s:8385993 l:8385867 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/1/63 s:16771860 l:8385930 [3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/15/63 s:25157790 l:33447330 GEOM: Configure ad0s1, start 32256 length 4293563904 end 4293596159 GEOM: Configure ad0s2, start 4293628416 length 4293563904 end 8587192319 GEOM: Configure ad0s3, start 8587192320 length 4293596160 end 12880788479 GEOM: Configure ad0s4, start 12880788480 length 17125032960 end 30005821439 GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727 GEOM: Configure ad0s3b, start 134217728 length 268435456 end 402653183 GEOM: Configure ad0s3c, start 0 length 4293596160 end 4293596159 GEOM: Configure ad0s3e, start 402653184 length 268435456 end 671088639 GEOM: Configure ad0s3f, start 671088640 length 268435456 end 939524095 GEOM: Configure ad0s3g, start 939524096 length 3354072064 end 4293596159 bus_explore done sbp_post_explore (sbp_cold=2) (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present Unretryable error (probe0:umass-sim0:0:0:0): error 6 (probe0:umass-sim0:0:0:0): Unretryable Error Mounting root from ufs:/dev/ad0s3a WARNING: / was not properly dismounted start_init: trying /sbin/init WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted ----- Original Message ----- From: Andre Guibert de Bruet To: Putinas Cc: freebsd-current_at_freebsd.org Sent: Friday, August 29, 2003 22:28 PM Subject: Re: sony vaio pcg-gr390 On Fri, 29 Aug 2003, Putinas wrote: > I tried to check might be my problem with choppy sound is fixed on my notebook ( definitly has problems with interupts and acpi , because sound becomes more or less acceptable if I make ping -f something outside - sound card and network uses same interupt ). > I upgraded to latest src, compile GENERIC, reboot... and whops: > hanging where initializing pcmcia ( or the something what goes after this ? ) this is if I boot with ACPI enabled. > If I boot with acpi disabled - panic and debuging screen ... > > So just to pay developers attention to this problem .. because I saw already to mails about notebooks and acpi ... Could you boot -v with acpi enabled and post the log somewhere? > Andre Guibert de Bruet | Enterprise Software Consultant > > Silicon Landmark, LLC. | http://siliconlandmark.com/ > _______________________________________________ freebsd-current_at_freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Fri Aug 29 2003 - 12:52:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:20 UTC