Hi, I've done some testing with acpi: S1 level -> does not blank the display. S2 level -> unsupported by the BIOS S3/S4 level -> reboot the machine, with at best a print_cpu debug statement[1] s5 level -> works as expected [1] I've pressed 'pause' and copied it for anybody that wants the register dump I've set the dump device and dumpdir, but no dumps are created - it's a reboot without a panic apparently. Attached are: * dmesg.boot * Kernel config * acpidump output * loader.conf * S1 run output (the only way to wake-up is to 'open the lid') * oids.start: relevant oids Setting of 'os_name' does not make any difference whatsoever. I've also disabled any firewall and usb devices, but it doesn't make a difference as well. If anything else is needed, let me know. -- Melvyn ======================================================= FreeBSD sarevok.webteckies.org 5.2-BETA FreeBSD 5.2-BETA #2: Mon Dec 1 17:58:47 CET 2003 root_at_sarevok.webteckies.org:/usr/obj/usr/src/sys/ SAREVOK_NOFW_DBG i386 =======================================================
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:32 UTC