Re: /dev/fd0 not working with ACPI

Am Di, den 02.12.2003 schrieb Nate Lawson um 23:32:
> dmesg, please, including error.
> 
> -Nate

Ok, here is a text attachment:
fdc0: cannot reserve I/O port range (6 ports), this was reported by some
others too within this year.



Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #3: Tue Dec  2 22:27:21 CET 2003
    root_at_fritz.mydomain.de:/usr/obj/usr/src/sys/FRITZ
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0945000.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc094526c.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0945318.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc09453c4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0945470.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc094551c.
Preloaded elf module "/boot/kernel/uhid.ko" at 0xc09455c4.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc0945670.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc0945718.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc09457c4.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0945870.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (896.19-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 268369920 (255 MB)
avail memory = 251052032 (239 MB)
Pentium Pro MTRR support enabled
acpi0: <AMIINT SiS735XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7950
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTD is routed to irq 5
pcib0: slot 2 INTA is routed to irq 12
pcib0: slot 2 INTC is routed to irq 11
pcib0: slot 3 INTA is routed to irq 11
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 5
pcib1: slot 0 INTA is routed to irq 5
nvidia0: <GeForce2 MX/MX 400> mem 0xc0000000-0xc7ffffff,0xce000000-0xceffffff irq 5 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 5 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 12 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <SiS 7012> port 0xd800-0xd83f,0xdc00-0xdcff irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xcfffd000-0xcfffdfff irq 11 at device 3.0 on pci0
sis0: Ethernet address: 00:07:95:b5:dc:e2
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xcc800-0xd47ff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 896191702 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2d78e60
ad0: 57277MB <SAMSUNG SV0602H> [116374/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc2d99660
ad1: 16446MB <ST317221A> [33416/16/63] at ata0-slave UDMA66
acd0: CDRW <R/RW 4x4x32> at ata1-master WDMA2
acd1: DVDROM <HL-DT-STDVD-ROM GDR8161B> at ata1-slave UDMA33
Mounting root from ufs:/dev/ad0s2a
Warning: pid 522 used static ldt allocation.
See the i386_set_ldt man page for more info