To help a little attached is boot -v any more information will be gladly given. -- "I think we ought to be out there doing what we do best - making large holes in other people's countries." - George Carlin Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Wed Dec 10 05:14:17 PST 2003 damm_at_envidious.livid.de:/usr/src/sys/i386/compile/ENVIDIOUS Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ff000. Table 'FACP' at 0x3ffffb24 Table 'APIC' at 0x3ffffb98 MADT: Found table at 0x3ffffb98 MP Configuration Table version 1.4 found at 0xc009f560 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 1 ACPI ID 0: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) ACPI APIC Table: <Intel N440BX > Calibrating clock(s) ... i8254 clock: 1193177 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 447691810 Hz CPU: Pentium II/Pentium II Xeon/Celeron (447.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 1073676288 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000003edc9fff, 1046089728 bytes (255393 pages) avail memory = 1037713408 (989 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00f6c20 bios32: Entry = 0xfd7e3 (c00fd7e3) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd680+0x430 pnpbios: Found PnP BIOS data at 0xc00f6c50 pnpbios: Entry = f0000:ad32 Rev = 1.0 Other BIOS signatures found: MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: intpin 0 -> ExtINT (edge, activehi) ioapic0: intpin 1 -> irq 1 (edge, activehi) ioapic0: intpin 2 -> irq 2 (edge, activehi) ioapic0: intpin 3 -> irq 3 (edge, activehi) ioapic0: intpin 4 -> irq 4 (edge, activehi) ioapic0: intpin 5 -> irq 5 (edge, activehi) ioapic0: intpin 6 -> irq 6 (edge, activehi) ioapic0: intpin 7 -> irq 7 (edge, activehi) ioapic0: intpin 8 -> irq 8 (edge, activehi) ioapic0: intpin 9 -> irq 9 (edge, activehi) ioapic0: intpin 10 -> irq 10 (edge, activehi) ioapic0: intpin 11 -> irq 11 (edge, activehi) ioapic0: intpin 12 -> irq 12 (edge, activehi) ioapic0: intpin 13 -> irq 13 (edge, activehi) ioapic0: intpin 14 -> irq 14 (edge, activehi) ioapic0: intpin 15 -> irq 15 (edge, activehi) ioapic0: intpin 16 -> irq 16 (level, activelo) ioapic0: intpin 17 -> irq 17 (level, activelo) ioapic0: intpin 18 -> irq 18 (level, activelo) ioapic0: intpin 19 -> irq 19 (level, activelo) ioapic0: intpin 20 -> irq 20 (level, activelo) ioapic0: intpin 21 -> irq 21 (level, activelo) ioapic0: intpin 22 -> irq 22 (level, activelo) ioapic0: intpin 23 -> irq 23 (level, activelo) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: active-hi lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: active-hi lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-hi ioapic0 <Version 1.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled acpi0: <PTLTD RSDT > on motherboard acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x800090b0 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086) pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00fdf00 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 16 A 0x60 3 4 5 7 10 11 12 14 15 slot 1 0 16 B 0x65 3 4 5 7 10 11 12 14 15 slot 1 0 16 C 0x66 3 4 5 7 10 11 12 14 15 slot 1 0 16 D 0x67 3 4 5 7 10 11 12 14 15 slot 2 0 13 A 0x61 3 4 5 7 10 11 12 14 15 slot 2 0 13 B 0x66 3 4 5 7 10 11 12 14 15 slot 2 0 13 C 0x67 3 4 5 7 10 11 12 14 15 slot 2 0 13 D 0x65 3 4 5 7 10 11 12 14 15 embedded 0 12 A 0x63 3 4 5 7 10 11 12 14 15 embedded 0 12 B 0x63 3 4 5 7 10 11 12 14 15 slot 3 0 11 A 0x62 3 4 5 7 10 11 12 14 15 slot 3 0 11 B 0x67 3 4 5 7 10 11 12 14 15 slot 3 0 11 C 0x65 3 4 5 7 10 11 12 14 15 slot 3 0 11 D 0x66 3 4 5 7 10 11 12 14 15 embedded 0 14 A 0x65 3 4 5 7 10 11 12 14 15 slot 4 0 9 A 0x63 3 4 5 7 10 11 12 14 15 slot 4 0 9 B 0x65 3 4 5 7 10 11 12 14 15 slot 4 0 9 C 0x66 3 4 5 7 10 11 12 14 15 slot 4 0 9 D 0x67 3 4 5 7 10 11 12 14 15 embedded 0 18 D 0x65 3 4 5 7 10 11 12 14 15 embedded 0 1 A 0x65 3 4 5 7 10 11 12 14 15 embedded 0 1 B 0x66 3 4 5 7 10 11 12 14 15 embedded 0 1 C 0x67 3 4 5 7 10 11 12 14 15 embedded 0 1 D 0x64 3 4 5 7 10 11 12 14 15 embedded 0 15 A 0x65 3 4 5 7 10 11 12 14 15 embedded 0 15 B 0x66 3 4 5 7 10 11 12 14 15 embedded 0 15 C 0x67 3 4 5 7 10 11 12 14 15 embedded 0 15 D 0x64 3 4 5 7 10 11 12 14 15 slot 5 255 4 A 0x64 3 4 5 7 10 11 12 14 15 slot 5 255 4 B 0x65 3 4 5 7 10 11 12 14 15 slot 5 255 4 C 0x66 3 4 5 7 10 11 12 14 15 slot 5 255 4 D 0x67 3 4 5 7 10 11 12 14 15 slot 6 255 7 A 0x67 3 4 5 7 10 11 12 14 15 slot 6 255 7 B 0x64 3 4 5 7 10 11 12 14 15 slot 6 255 7 C 0x65 3 4 5 7 10 11 12 14 15 slot 6 255 7 D 0x66 3 4 5 7 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 unknown: not probed (disabled) pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x71a0, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x71a1, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x84 (33000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 1, range 64, base f4100000, size 12, enabled pcib0: matched entry for 0.12.INTA (source ) pcib0: device is hardwired to IRQ 19 found-> vendor=0x9005, dev=0x005f, revid=0x00 bus=0, slot=12, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns) intpin=a, irq=19 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 1, range 64, base f4101000, size 12, enabled pcib0: matched entry for 0.12.INTA (source ) pcib0: device is hardwired to IRQ 19 found-> vendor=0x9005, dev=0x005f, revid=0x00 bus=0, slot=12, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns) intpin=a, irq=19 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base f4102000, size 12, enabled map[14]: type 4, range 32, base 00002800, size 6, enabled map[18]: type 1, range 32, base f4000000, size 20, enabled pcib0: matched entry for 0.14.INTA (source ) pcib0: device is hardwired to IRQ 21 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=14, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=18, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00002860, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=18, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00002840, size 5, enabled pcib0: matched entry for 0.18.INTD (source ) pcib0: device is hardwired to IRQ 21 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=18, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=21 map[90]: type 4, range 32, base 00001040, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=18, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f6000000, size 25, enabled map[14]: type 1, range 32, base f4103000, size 12, enabled found-> vendor=0x1013, dev=0x00bc, revid=0x23 bus=0, slot=20, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x0a (2500 ns) agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1011, dev=0x0023, revid=0x06 bus=1, slot=15, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0307, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0xf0 (7200 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) pcib2: <PCI-PCI bridge> at device 15.0 on pci1 pcib2: secondary bus 2 pcib2: subordinate bus 3 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: <PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x104c, dev=0xac21, revid=0x01 bus=2, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xd0 (6240 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) pcib3: <PCI-PCI bridge> at device 4.0 on pci2 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xfff00000-0xfffff pcib3: prefetched decode 0xfff00000-0xfffff pci3: <PCI bus> on pcib3 pci3: physical bus=3 ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 19 at device 12.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 417 instructions downloaded ahc0: Features 0x76f6, Bugs 0x8, Flags 0x20485540 aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 19 at device 12.1 on pci0 ahc1: Defaulting to MEMIO off ahc1: Reading SEEPROM...done. ahc1: Manual LVD Termination ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 417 instructions downloaded ahc1: Features 0x76f6, Bugs 0x8, Flags 0x20485540 aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 21 at device 14.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:90:27:8d:08:11 fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached isab0: <PCI-ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x2860-0x286f at device 18.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x04 lsb=0x7f msb=0x7f ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 18.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 18.3 (no driver attached) pci0: <display, VGA> at device 20.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: irq maps: 0x4081 0x4091 0x4081 0x4081 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x4081 0x4089 0x4081 0x4081 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface fdc: fdc0 already exists; skipping it ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it ppc: ppc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) bt0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vt0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) ed0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) ie0: not probed (disabled) fe0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 447691810 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel PIIX4 chip acd0: <TOSHIBA CD-ROM XM-6702B/1007> CDROM drive at ata0 as master acd0: read 8268KB/s (8268KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe0:ata0:0:0:0): Retrying Command (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): Retrying Command (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe4:ahc0:0:0:0): Retrying Command (probe5:ahc0:0:1:0): Retrying Command (ahc0:A:0:0): Sending WDTR 1 (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers (ahc0:A:0:0): Sending SDTR period c, offset 7f (ahc0:A:0:0): Received SDTR period c, offset 1f Filtered to period c, offset 1f ahc0: target 0 synchronous at 20.0MHz, offset = 0x1f (ahc0:A:1:0): Sending WDTR 1 (ahc0:A:1:0): Received WDTR 1 filtered to 1 ahc0: target 1 using 16bit transfers (ahc0:A:1:0): Sending SDTR period c, offset 7f (ahc0:A:1:0): Received SDTR period c, offset 1f Filtered to period c, offset 1f ahc0: target 1 synchronous at 20.0MHz, offset = 0x1f pass0 at ahc0 bus 0 target 0 lun 0 pass0: <FUJITSU MAB3091S SUN9.0G 2107> Fixed Direct Access SCSI-2 device pass0: Serial Number 50010843 pass0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 1 lun 0 pass1: <COMPAQ BB009135B4 B017> Fixed Direct Access SCSI-2 device pass1: Serial Number 37040278 0034 pass1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled pass2 at ata0 bus 0 target 0 lun 0 pass2: <TOSHIBA CD-ROM XM-6702B 1007> Removable CD-ROM SCSI-0 device pass2: 16.000MB/s transfers GEOM: create disk cd0 dp=0xc6718e00 GEOM: create disk da0 dp=0xc673b850 GEOM: create disk da1 dp=0xc672e450 da0 at ahc0 bus 0 target 0 lun 0 da0: <FUJITSU MAB3091S SUN9.0G 2107> Fixed Direct Access SCSI-2 device da0: Serial Number 50010843 da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da1 at ahc0 bus 0 target 1 lun 0 da1: <COMPAQ BB009135B4 B017> Fixed Direct Access SCSI-2 device da1: Serial Number 37040278 0034 da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) (cd0:ata0:0:0:0): Retrying Command GEOM: new disk cd0 GEOM: new disk da0 GEOM: new disk da1 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (IRQ 1) to cluster 0 ioapic0: routing intpin 3 (IRQ 3) to cluster 0 ioapic0: routing intpin 4 (IRQ 4) to cluster 0 ioapic0: routing intpin 6 (IRQ 6) to cluster 0 ioapic0: routing intpin 7 (IRQ 7) to cluster 0 ioapic0: routing intpin 8 (IRQ 8) to cluster 0 ioapic0: routing intpin 9 (IRQ 9) to cluster 0 ioapic0: routing intpin 12 (IRQ 12) to cluster 0 ioapic0: routing intpin 13 (IRQ 13) to cluster 0 ioapic0: routing intpin 14 (IRQ 14) to cluster 0 ioapic0: routing intpin 15 (IRQ 15) to cluster 0 ioapic0: routing intpin 19 (IRQ 19) to cluster 0 ioapic0: routing intpin 21 (IRQ 21) to cluster 0 (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error cd0 at ata0 bus 0 target 0 lun 0 cd0: <TOSHIBA CD-ROM XM-6702B 1007> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata0:0:0:0): Retrying Command (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): Retrying Command (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17687502 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 9056001024 end 9056033279 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da1s1, start 32256 length 9097127424 end 9097159679 GEOM: Configure da0s1a, start 0 length 268435456 end 268435455 GEOM: Configure da0s1b, start 268435456 length 2125160448 end 2393595903 GEOM: Configure da0s1c, start 0 length 9056001024 end 9056001023 GEOM: Configure da0s1d, start 2393595904 length 268435456 end 2662031359 GEOM: Configure da0s1e, start 2662031360 length 268435456 end 2930466815 GEOM: Configure da0s1f, start 2930466816 length 6125534208 end 9056001023 GEOM: Configure da1s1c, start 0 length 9097127424 end 9097127423 GEOM: Configure da1s1d, start 0 length 9097062400 end 9097062399 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init Linux ELF exec handler installedReceived on Wed Dec 10 2003 - 12:05:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:33 UTC