Re: ACPI + Power off feature br00ken?

From: Anthony Ginepro <anthony.ginepro_at_laposte.net>
Date: Thu, 11 Dec 2003 08:40:11 +0100
I use these lines in my /etc/sysctl.conf in order to be able to shutdown
correctly :

# Help shutdown
hw.acpi.disable_on_poweroff=0

Anthony.

> On my ancient, and I do mean Ancient Dual P2-450 running 5.2-CURRENT
> 
> As of last night, I can't get it to shutoff like a good boy anymore.
> 
> shutdown -p now it acts like it's trying to shutoff, then just reboots.
> 
> What a err.
> 
> At any rate, anyone have any hints as are to track down what is causing
> the problem.
> 
> ACPI is being used, nothing unusual really.
> 
> Attached, are kernel config, and a few other various useless things.
> 
> Scott
> 
> P.S. yes it worked before hand.
> 
> Shutting down, it acts like it's going to call the acpi poweroff
> feature, and doesn't.
> ?
> 
> -- 
> "I think we ought to be out there doing what we do best - making large
> holes in other people's countries." - George Carlin
> 

> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.2-CURRENT #0: Wed Dec 10 05:14:17 PST 2003
>     damm_at_envidious.livid.de:/usr/src/sys/i386/compile/ENVIDIOUS
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ff000.
> ACPI APIC Table: <Intel  N440BX  >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Pentium II/Pentium II Xeon/Celeron (447.69-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
>   Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> real memory  = 1073676288 (1023 MB)
> avail memory = 1037713408 (989 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  1
>  cpu1 (AP): APIC ID:  0
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> Pentium Pro MTRR support enabled
> acpi0: <PTLTD    RSDT  > on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> pcibios: BIOS version 2.10
> Using $PIR table, 12 entries at 0xc00fdf00
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib2: <PCI-PCI bridge> at device 15.0 on pci1
> pci2: <PCI bus> on pcib2
> pcib3: <PCI-PCI bridge> at device 4.0 on pci2
> pci3: <PCI bus> on pcib3
> ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 19 at device 12.0 on pci0
> aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
> ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 19 at device 12.1 on pci0
> aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 21 at device 14.0 on pci0
> fxp0: Ethernet address 00:90:27:8d:08:11
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI-ISA bridge> at device 18.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 UDMA33 controller> port 0x2860-0x286f at device 18.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> pci0: <serial bus, USB> at device 18.2 (no driver attached)
> pci0: <bridge, PCI-unknown> at device 18.3 (no driver attached)
> pci0: <display, VGA> at device 20.0 (no driver attached)
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pmtimer0 on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> Timecounters tick every 10.000 msec
> acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata0-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> GEOM: create disk cd0 dp=0xc6718e00
> GEOM: create disk da0 dp=0xc672c850
> GEOM: create disk da1 dp=0xc672e450
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <FUJITSU MAB3091S SUN9.0G 2107> Fixed Direct Access SCSI-2 device 
> da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
> da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
> da1 at ahc0 bus 0 target 1 lun 0
> da1: <COMPAQ BB009135B4 B017> Fixed Direct Access SCSI-2 device 
> da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
> da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
> SMP: AP CPU #1 Launched!
> cd0 at ata0 bus 0 target 0 lun 0
> cd0: <TOSHIBA CD-ROM XM-6702B 1007> Removable CD-ROM SCSI-0 device 
> cd0: 16.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Mounting root from ufs:/dev/da0s1a

> machine		i386
> cpu		I486_CPU
> cpu		I586_CPU
> cpu		I686_CPU
> ident		ENVIDIOUS
> hints		"GENERIC.hints"		#Default places to look for devices.
> makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
> options 	SCHED_ULE		#4BSD scheduler
> options 	INET			#InterNETworking
> options 	INET6			#IPv6 communications protocols
> options 	FFS			#Berkeley Fast Filesystem
> options 	SOFTUPDATES		#Enable FFS soft updates support
> options 	UFS_ACL			#Support for access control lists
> options 	UFS_DIRHASH		#Improve performance on big directories
> options 	MD_ROOT			#MD is a potential root device
> options 	NFSCLIENT		#Network Filesystem Client
> options 	NFSSERVER		#Network Filesystem Server
> options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
> options 	MSDOSFS			#MSDOS Filesystem
> options 	CD9660			#ISO 9660 Filesystem
> options 	PROCFS			#Process filesystem (requires PSEUDOFS)
> options 	PSEUDOFS		#Pseudo-filesystem framework
> options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
> options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
> options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
> options 	KTRACE			#ktrace(1) support
> options 	SYSVSHM			#SYSV-style shared memory
> options 	SYSVMSG			#SYSV-style message queues
> options 	SYSVSEM			#SYSV-style semaphores
> options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
> options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
> options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
> 					# output.  Adds ~128k to driver.
> options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
> 					# output.  Adds ~215k to driver.
> options 	SMP			# Symmetric MultiProcessor Kernel
> device		apic			# I/O APIC
> device		acpi
> device		isa
> device		eisa
> device		pci
> device		fdc
> device		ata
> device		atadisk			# ATA disk drives
> device		atapicam
> device		atapicd			# ATAPI CDROM drives
> options 	ATA_STATIC_ID		#Static device numbering
> device		ahc		# AHA2940 and onboard AIC7xxx devices
> device		scbus		# SCSI bus (required for SCSI)
> device		ch		# SCSI media changers
> device		da		# Direct Access (disks)
> device		sa		# Sequential Access (tape etc)
> device		cd		# CD
> device		pass		# Passthrough device (direct SCSI access)
> device		ses		# SCSI Environmental Services (and SAF-TE)
> device		atkbdc		# AT keyboard controller
> device		atkbd		# AT keyboard
> device		psm		# PS/2 mouse
> device		vga		# VGA video card driver
> device		splash		# Splash screen and screen saver support
> device		sc
> device		agp		# support several AGP chipsets
> device		npx
> device		pmtimer
> device		sio		# 8250, 16[45]50 based serial ports
> device		ppc
> device		ppbus		# Parallel port bus (required)
> device		lpt		# Printer
> device		plip		# TCP/IP over parallel
> device		ppi		# Parallel port interface device
> device		miibus		# MII bus support
> device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
> device		random		# Entropy device
> device		loop		# Network loopback
> device		ether		# Ethernet support
> device		sl		# Kernel SLIP
> device		ppp		# Kernel PPP
> device		tun		# Packet tunnel.
> device		pty		# Pseudo-ttys (telnet etc)
> device		md		# Memory "disks"
> device		gif		# IPv6 and IPv4 tunneling
> device		faith		# IPv6-to-IPv4 relaying (translation)
> device		bpf		# Berkeley packet filter

> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
Received on Wed Dec 10 2003 - 22:40:16 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:33 UTC