A bit more (hopefully useful) information regarding this LOR panic. A verbose boot into the panic follows... # ident /boot/ok/kernel > ident.ok # ident /boot/kernel/kernel > ident.panic # diff -u ident.ok ident.panic |fgrep FreeBSD |fgrep "+" |fgrep -v ddb + $FreeBSD: src/sys/cam/scsi/scsi_all.c,v 1.44 2003/12/01 10:13:00 obrien Exp $ + $FreeBSD: src/sys/cam/scsi/scsi_da.c,v 1.162 2003/12/08 06:29:38 ps Exp $ + $FreeBSD: src/sys/dev/ata/ata-all.c,v 1.198 2003/11/30 16:27:58 sos Exp $ + $FreeBSD: src/sys/dev/ata/ata-lowlevel.c,v 1.25 2003/12/10 23:06:24 sos Exp $ + $FreeBSD: src/sys/dev/ata/ata-isa.c,v 1.18 2003/12/03 13:40:26 sos Exp $ + $FreeBSD: src/sys/dev/ata/ata-pci.c,v 1.72 2003/12/09 19:13:50 sos Exp $ + $FreeBSD: src/sys/dev/ata/ata-chipset.c,v 1.50 2003/12/08 09:22:20 sos Exp $ + $FreeBSD: src/sys/dev/ata/atapi-cd.c,v 1.157 2003/12/07 23:15:22 sos Exp $ + $FreeBSD: src/sys/dev/ata/atapi-cam.c,v 1.29 2003/12/05 01:02:46 scottl Exp $ + $FreeBSD: src/sys/geom/geom_disk.c,v 1.81 2003/12/07 23:20:53 truckman Exp $ + $FreeBSD: src/sys/geom/geom_dump.c,v 1.30 2003/12/07 05:04:49 scottl Exp $ + $FreeBSD: src/sys/geom/geom_event.c,v 1.44 2003/12/07 10:04:43 phk Exp $ + $FreeBSD: src/sys/geom/geom_io.c,v 1.51 2003/12/07 23:20:53 truckman Exp $ + $FreeBSD: src/sys/kern/kern_prot.c,v 1.179 2003/12/06 21:48:01 rwatson Exp $ + $FreeBSD: src/sys/kern/kern_sig.c,v 1.263 2003/12/07 23:47:15 davidxu Exp $ + $FreeBSD: src/sys/kern/kern_thread.c,v 1.165 2003/12/10 01:59:23 marcel Exp $ + $FreeBSD: src/sys/kern/kern_timeout.c,v 1.84 2003/12/07 20:03:28 phk Exp $ + $FreeBSD: src/sys/kern/sched_ule.c,v 1.89 2003/12/12 07:33:51 jeff Exp $ + $FreeBSD: src/sys/kern/subr_mbuf.c,v 1.57 2003/12/07 21:53:41 truckman Exp $ + $FreeBSD: src/sys/kern/subr_prf.c,v 1.108 2003/12/07 05:04:49 scottl Exp $ + $FreeBSD: src/sys/kern/subr_smp.c,v 1.180 2003/12/03 14:55:31 jhb Exp $ + $FreeBSD: src/sys/kern/subr_turnstile.c,v 1.137 2003/12/09 21:14:31 jhb Exp $ + $FreeBSD: src/sys/kern/subr_witness.c,v 1.165 2003/11/20 15:35:48 markm Exp $ + $FreeBSD: src/sys/kern/uipc_syscalls.c,v 1.159 2003/12/01 22:12:50 dg Exp $ + $FreeBSD: src/sys/kern/vfs_mount.c,v 1.117 2003/11/30 23:30:09 iedowse Exp $ + $FreeBSD: src/sys/kern/vfs_subr.c,v 1.473 2003/11/30 22:09:58 jeff Exp $ + $FreeBSD: src/sys/ufs/ffs/ffs_vfsops.c,v 1.226 2003/12/07 05:16:52 truckman Exp $ + $FreeBSD: src/sys/vm/vm_mmap.c,v 1.176 2003/12/08 02:45:45 kan Exp $ + $FreeBSD: src/sys/vm/uma_core.c,v 1.89 2003/12/03 14:57:26 jhb Exp $ + $FreeBSD: src/sys/i386/i386/db_disasm.c,v 1.28 2003/08/25 09:48:46 obrien Exp $ + $FreeBSD: src/sys/i386/i386/db_interface.c,v 1.77 2003/11/08 03:01:26 alc Exp $ + $FreeBSD: src/sys/i386/i386/db_trace.c,v 1.59 2003/11/03 22:07:21 jhb Exp $ + $FreeBSD: src/sys/i386/i386/i386-gdbstub.c,v 1.25 2003/08/25 09:48:46 obrien Exp $ + $FreeBSD: src/sys/i386/i386/local_apic.c,v 1.5 2003/12/11 03:49:02 jeff Exp $ + $FreeBSD: src/sys/i386/i386/machdep.c,v 1.584 2003/12/03 21:12:09 jhb Exp $ + $FreeBSD: src/sys/i386/i386/mp_machdep.c,v 1.229 2003/12/11 03:48:31 jeff Exp $ + $FreeBSD: src/sys/i386/i386/mptable.c,v 1.229 2003/12/10 19:29:39 jhb Exp $ + $FreeBSD: src/sys/i386/i386/vm_machdep.c,v 1.220 2003/12/07 22:49:25 alc Exp $ + $FreeBSD: src/sys/isa/psm.c,v 1.63 2003/12/11 11:28:11 alfred Exp $ SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=000000001fec0000 SMAP type=03 base=000000001ffe0000 len=0000000000018000 SMAP type=04 base=000000001fff8000 len=0000000000008000 SMAP type=03 base=000000001ffc0000 len=0000000000020000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000fff00000 len=0000000000100000 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #2: Fri Dec 12 14:08:46 EST 2003 root_at_bsdfs5.gactr.uga.edu:/usr/obj/usr/src/sys/ule.debug Preloaded elf kernel "/boot/kernel/kernel" at 0xc077c000. Preloaded elf module "/boot/modules/if_fxp.ko" at 0xc077c26c. Preloaded elf module "/boot/modules/miibus.ko" at 0xc077c318. Preloaded elf module "/boot/modules/twe.ko" at 0xc077c3c4. Preloaded elf module "/boot/modules/acpi.ko" at 0xc077c470. Calibrating clock(s) ... i8254 clock: 1193217 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 851935884 Hz CPU: Intel Pentium III (851.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P A T,PSE36,MMX,FXSR,SSE> real memory = 536608768 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000001f69afff, 518463488 bytes (126578 pages) avail memory = 515870720 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00fda60 bios32: Entry = 0xfda74 (c00fda74) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xda95 pnpbios: Found PnP BIOS data at 0xc00f2550 pnpbios: Entry = f0000:1e1d Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <INTEL TR440BXA> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00f2a80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0xfe 14 embedded 0 7 B 0xff 15 embedded 0 7 D 0x63 3 4 5 7 10 11 12 14 15 slot 1 0 14 A 0x60 3 4 5 7 10 11 12 14 15 slot 1 0 14 B 0x61 3 4 5 7 10 11 12 14 15 slot 1 0 14 C 0x62 3 4 5 7 10 11 12 14 15 slot 1 0 14 D 0x63 3 4 5 7 10 11 12 14 15 slot 2 0 15 A 0x62 3 4 5 7 10 11 12 14 15 slot 2 0 15 B 0x63 3 4 5 7 10 11 12 14 15 slot 2 0 15 C 0x60 3 4 5 7 10 11 12 14 15 slot 2 0 15 D 0x61 3 4 5 7 10 11 12 14 15 slot 3 0 16 A 0x63 3 4 5 7 10 11 12 14 15 slot 3 0 16 B 0x60 3 4 5 7 10 11 12 14 15 slot 3 0 16 C 0x61 3 4 5 7 10 11 12 14 15 slot 3 0 16 D 0x62 3 4 5 7 10 11 12 14 15 embedded 0 12 A 0x61 3 4 5 7 10 11 12 14 15 embedded 0 13 A 0x61 3 4 5 7 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 16777213, width = 16777211 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 1, max = 5, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.7.3 \_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.14.0 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.14.1 \_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.14.2 \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.14.3 \_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.15.0 \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.15.1 \_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.15.2 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.15.3 \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.16.0 \_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.16.1 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.16.2 \_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.16.3 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.12.0 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.13.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.7.3 \_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.14.0 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.14.1 \_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.14.2 \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.14.3 \_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.15.0 \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.15.1 \_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.15.2 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.15.3 \_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.16.0 \_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.16.1 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.16.2 \_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.16.3 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.12.0 \_SB_.LNKB irq 7: [ 3 4 5 6 7 10 11 12 14 15] 0.13.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x8086, dev=0x7192, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ef80, size 5, enabled pcib0: matched entry for 0.7.INTD (source \_SB_.LNKD) pcib0: slot 7 INTD is routed to irq 5 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[90]: type 4, range 32, base 00000440, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base febfd000, size 12, enabled map[14]: type 4, range 32, base 0000ef00, size 6, enabled map[18]: type 1, range 32, base fea00000, size 20, enabled pcib0: matched entry for 0.12.INTA (source \_SB_.LNKB) pcib0: slot 12 INTA is routed to irq 7 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base febfc000, size 12, enabled map[14]: type 4, range 32, base 0000ee80, size 6, enabled map[18]: type 1, range 32, base fe800000, size 20, enabled pcib0: matched entry for 0.13.INTA (source \_SB_.LNKB) pcib0: slot 13 INTA is routed to irq 7 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled map[14]: type 4, range 32, base 0000e800, size 8, enabled map[18]: type 1, range 32, base febff000, size 12, enabled pcib0: matched entry for 0.14.INTA (source \_SB_.LNKA) pcib0: slot 14 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=0, slot=14, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000efa0, size 4, enabled map[14]: type 1, range 32, base febfec00, size 4, enabled map[18]: type 1, range 32, base fe000000, size 23, enabled pcib0: matched entry for 0.15.INTA (source \_SB_.LNKC) pcib0: slot 15 INTA is routed to irq 10 found-> vendor=0x13c1, dev=0x1001, revid=0x01 bus=0, slot=15, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x011f, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x09 (2250 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D3 current D0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci 0 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x01 err=0x04 lsb=0x14 msb=0xeb ata0: reset tp2 mask=03 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xef00-0xef3f mem 0xfea00000-0xfeaffff f,0xfebfd000-0xfebfdfff irq 7 at device 12.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:02:b3:86:a6:d4 fxp0: PCI IDs: 8086 1229 8086 3000 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp1: <Intel 82559 Pro/100 Ethernet> port 0xee80-0xeebf mem 0xfe800000-0xfe8ffff f,0xfebfc000-0xfebfcfff irq 7 at device 13.0 on pci0 fxp1: using memory space register mapping fxp1: Ethernet address 00:02:b3:86:a6:d5 fxp1: PCI IDs: 8086 1229 8086 3000 0008 fxp1: Dynamic Standby mode is disabled miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached pci0: <display, VGA> at device 14.0 (no driver attached) twe0: <3ware 7000 series Storage Controller. Driver version 1.50.00.000> port 0x efa0-0xefaf mem 0xfe000000-0xfe7fffff,0xfebfec00-0xfebfec0f irq 10 at device 15. 0 on pci0 twe0: AEN: <soft reset> twe0: 2 ports, Firmware FE7X 1.05.00.056, BIOS BE7X 1.08.00.046 twe0: Monitor ME7X 1.01.00.038, PCB Rev3 , Achip 3.20 , Pchip 1.30-33 twe0: port 0: WDC WD200BB-18CAA0 19073MB twe0: port 1: WDC WD200BB-18CAA0 19073MB unknown: not probed (disabled) acpi_button0: <Sleep Button> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 3c psm: status 00 00 3c psm: status 00 03 3c psm: status 00 03 3c psm: data 00 00 00 psm: data 00 00 00 psm: status 00 02 28 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:00 fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xca800-0xcbfff,0xc9000-0xca7ff,0xc8000-0xc8fff,0xc 0000-0xc7fff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f 0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 851935884 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip acd0: <CD-224E/1.7A> CDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc twed0: <Unit 0, TwinStor, Normal> on twe0 twed0: 19072MB (39060452 sectors) GEOM: create disk twed0 dp=0xc43ef98c GEOM: new disk twed0 [0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/102/11 s:0 l:39060452 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure twed0s1, start 0 length 19998951424 end 19998951423 GEOM: Configure twed0a, start 0 length 134217728 end 134217727 GEOM: Configure twed0b, start 134217728 length 1073741824 end 1207959551 GEOM: Configure twed0c, start 0 length 19998951424 end 19998951423 GEOM: Configure twed0d, start 1207959552 length 134217728 end 1342177279 GEOM: Configure twed0e, start 1342177280 length 134217728 end 1476395007 GEOM: Configure twed0f, start 1476395008 length 1073741824 end 2550136831 GEOM: Configure twed0g, start 2550136832 length 17448814592 end 19998951423 GEOM: Configure twed0s1a, start 0 length 134217728 end 134217727 GEOM: Configure twed0s1b, start 134217728 length 1073741824 end 1207959551 GEOM: Configure twed0s1c, start 0 length 19998951424 end 19998951423 GEOM: Configure twed0s1d, start 1207959552 length 134217728 end 1342177279 GEOM: Configure twed0s1e, start 1342177280 length 134217728 end 1476395007 GEOM: Configure twed0s1f, start 1476395008 length 1073741824 end 2550136831 GEOM: Configure twed0s1g, start 2550136832 length 17448814592 end 19998951423 (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error GEOM: create disk cd0 dp=0xc44ba600 pass0 at ata0 bus 0 target 0 lun 0 pass0: <TEAC CD-224E 1.7A> Removable CD-ROM SCSI-0 device pass0: Serial Number ^_ pass0: 33.000MB/s transfers (cd0:ata0:0:0:0): Retrying Command (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error cd0 at ata0 bus 0 target 0 lun 0 cd0: <TEAC CD-224E 1.7A> Removable CD-ROM SCSI-0 device cd0: Serial Number ^_ cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present GEOM: new disk cd0 (cd0:ata0:0:0:0): Retrying Command (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): Retrying Command (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error Mounting root from ufs:/dev/twed0s1a start_init: trying /sbin/init lock order reversal 1st 0xc063ece0 sched lock (sched lock) _at_ /usr/src/sys/kern/sched_ule.c:1465 2nd 0xc0673780 sio (sio) _at_ /usr/src/sys/dev/sio/sio.c:3203 Stack backtrace: backtrace(c05f90ac,c0673780,c062ede0,c062ede0,c0604dd1) at backtrace+0x17 witness_lock(c0673780,8,c0604dd1,c83,3f8) at witness_lock+0x5aa _mtx_lock_spin_flags(c0673780,0,c0604dd1,c83,ffffffff) at _mtx_lock_spin_flags+0 x8a siocnputc(c062ef60,6b,5,d7657b60,6b) at siocnputc+0x81 cnputc(6b,ffffffff,1,c1907500,c06085a9) at cnputc+0x7a putchar(6b,d7657b60,ffffffff,ffffffff,ffffffff) at putchar+0x6c kvprintf(c06085a8,c04d5300,d7657b60,a,d7657b80) at kvprintf+0x8d printf(c06085a8,c,c063ece0,c4354280,c1907500) at printf+0x57 trap(c0640018,10,10,1,0) at trap+0xd7 calltrap() at calltrap+0x5 --- trap 0xc, eip = 0xc05b8be0, esp = 0xd7657c04, ebp = 0xd7657c10 --- lapic_ipi_wait(f4240,d7657c38,0,1,d7657c44) at lapic_ipi_wait+0x30 lapic_ipi_vectored(f3,0,c1902360,0,c0640f40) at lapic_ipi_vectored+0x4f ipi_selected(1,f3) at ipi_selected+0x25 kseq_notify(c1902360,0,c1902360,3,c436b000) at kseq_notify+0x7e kseq_transfer(c0640f40,c1902360,3,c0640f40,c05f76a3) at kseq_transfer+0xc1 sched_add(c436b000,c0640f40,d7657cdc,c04c9918,c0640f40) at sched_add+0x165 kseq_assign(c0640f40,0,c05f76a3,5b9,c0603a9a) at kseq_assign+0x42 sched_runnable(c063ece0,0,c0603a9a,a0,d7657d10) at sched_runnable+0x58 vm_pagezero(0,d7657d48,c05f4b01,311,ffffffff) at vm_pagezero+0xfd fork_exit(c0588ff0,0,d7657d48) at fork_exit+0x7e fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xd7657d7c, ebp = 0 --- Debugger("witness_lock") Stopped at Debugger+0x55: xchgl %ebx,in_Debugger.0 db> show locks exclusive spin mutex sched lock r = 0 (0xc063ece0) locked _at_ /usr/src/sys/kern/sc hed_ule.c:1465 db> cont kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x300 fault code = supervisor read, page not present instruction pointer = 0x8:0xc05b8be0 stack pointer = 0x10:0xd7657c04 frame pointer = 0x10:0xd7657c10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 vm_pagezero(0,d7657d48,c05f4b01,311,ffffffff) at vm_pagezero+0xfd fork_exit(c0588ff0,0,d7657d48) at fork_exit+0x7e fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xd7657d7c, ebp = 0 --- Debugger("witness_lock") Stopped at Debugger+0x55: xchgl %ebx,in_Debugger.0 db> show locks exclusive spin mutex sched lock r = 0 (0xc063ece0) locked _at_ /usr/src/sys/kern/sc hed_ule.c:1465 db> cont kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x300 fault code = supervisor read, page not present instruction pointer = 0x8:0xc05b8be0 stack pointer = 0x10:0xd7657c04 frame pointer = 0x10:0xd7657c10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 current process = 39 (pagezero) kernel: type 12 trap, code=0 Stopped at lapic_ipi_wait+0x30: movl 0x300(%ebx),%eax db> cont panic: blockable sleep lock (sleep mutex) process lock _at_ /usr/src/sys/i386/i386/ trap.c:706 cpuid = 0; Stack backtrace: backtrace(c05e9529,0,c05f8f1b,d7657ae4,100) at backtrace+0x17 panic(c05f8f1b,c0602d10,c05f6131,c060860b,2c2) at panic+0x141 witness_lock(c43cb77c,8,c060860b,2c2,c43cb77c) at witness_lock+0xa0 _mtx_lock_flags(c43cb77c,0,c060860b,2c2,c1907500) at _mtx_lock_flags+0x6a trap_pfault(d7657bc4,0,300,c4354280,300) at trap_pfault+0x9b trap(18,10,10,1,0) at trap+0x2fd calltrap() at calltrap+0x5 --- trap 0xc, eip = 0xc05b8be0, esp = 0xd7657c04, ebp = 0xd7657c10 --- lapic_ipi_wait(f4240,d7657c38,0,1,d7657c44) at lapic_ipi_wait+0x30 lapic_ipi_vectored(f3,0,c1902360,0,c0640f40) at lapic_ipi_vectored+0x4f ipi_selected(1,f3) at ipi_selected+0x25 kseq_notify(c1902360,0,c1902360,3,c436b000) at kseq_notify+0x7e kseq_transfer(c0640f40,c1902360,3,c0640f40,c05f76a3) at kseq_transfer+0xc1 sched_add(c436b000,c0640f40,d7657cdc,c04c9918,c0640f40) at sched_add+0x165 kseq_assign(c0640f40,0,c05f76a3,5b9,c0603a9a) at kseq_assign+0x42 sched_runnable(c063ece0,0,c0603a9a,a0,d7657d10) at sched_runnable+0x58 vm_pagezero(0,d7657d48,c05f4b01,311,ffffffff) at vm_pagezero+0xfd fork_exit(c0588ff0,0,d7657d48) at fork_exit+0x7e fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xd7657d7c, ebp = 0 --- Debugger("panic") --------------------------------------- Robin P. Blanchard Systems Integration Specialist Georgia Center for Continuing Education fon: 706.542.2404 < > fax: 706.542.6546 ---------------------------------------Received on Fri Dec 12 2003 - 10:36:27 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:33 UTC