Re: Cdrecord broken with 5.2Beta and ATAPICAM

From: slave-mike <slave-mike_at_slavepix.com>
Date: Sat, 13 Dec 2003 02:49:40 -0500
You are most welcome.
Nakata Maho wrote:
> Hi, slave-mike,
> 
> I've just read your e-mail, thanks!
> 
> 
>>add -force flag and you can burn in spite of the ataNG problem with atapicam
> 
> 
> Yes, I've just confirmed.
> Thank you very much for your infomation!
> 
> ----------------------------------------------------------------
> cdrecord -force dev=1,0,0 /home/maho/5.2-RC1-amd64-bootonly.iso
> Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002 Jrg Schilling
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Using libscg version 'schily-0.7'
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   : 
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-106D'
> Revision       : '1.07'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
> cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : MMC-3 SWABAUDIO BURNFREE 
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Starting to write CD/DVD at speed 16 in real TAO mode for single session.
> Last chance to quit, starting real write    0 seconds. Operation starts.
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB:  2A 00 00 00 01 B2 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid) 
> cmd finished after 0.000s timeout 40s
> write track data: error after 888832 bytes
> Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00
> 
> 
> # mount /cdrom
> root# cd /cdrom/
> root# ls
> boot/           boot.catalog
> root# cd boot/
> root# ls
> beastie.4th     boot2           frames.4th      loader.conf     mfsroot.gz      support.4th
> boot            cdboot*         kernel/         loader.help     modules/
> boot0           defaults/       loader*         loader.rc       pxeboot*
> boot1           device.hints    loader.4th      mbr             screen.4th
> 
> Yes! I've done it!
> --maho
> 


-- 
http://slavepix.com/
Received on Fri Dec 12 2003 - 22:49:26 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:33 UTC