The install process from CDROM (downloaded ISO image) worked just fine, and installing numerous ports and 3rd-party packages has not exhibited any problems so far. Gnome2 is up and running, though the bottom of the output for the Gnome2 weather applet is cut off. I haven't tried compiling a new kernel yet or updating any system source yet, so this is coming from a fresh install. The running machine is a home-built tower "appliance". The floppy drive, which works just fine under FBSD-4.x, STILL doesn't work under FBSD-5.x ?!? Whilst the ACPI "error" messages occur, there doesn't (yet) seem to be any ill affect on the system. /var/run/dmesg.boot: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RC1 #0: Sun Dec 7 22:15:14 GMT 2003 root_at_wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2c000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2c244. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3245.47-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073676288 (1023 MB) avail memory = 1033510912 (985 MB) ACPI APIC Table: <AMIINT INTEL875> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT INTEL875> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20 pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f7720 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc29afb60), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc29afa60), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc29afa60), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc29afb60), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc29bd600), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc29bd600), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu1: Failed to attach throttling P_CNT acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 16 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <base peripheral> at device 6.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ugen0: APC Back-UPS ES 725 FW:802.n2.D USB FW:n2, rev 1.10/1.06, addr 2 uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <multimedia, audio> at device 1.0 (no driver attached) pci2: <input device> at device 1.1 (no driver attached) ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfeaff000-0xfeafffff irq 18 at device 2.0 on pci2 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xc000-0xc0ff mem 0xfeafe000-0xfeafefff irq 19 at device 3.0 on pci2 sis0: Silicon Revision: DP83815D sis0: Ethernet address: 00:09:5b:1e:62:ec miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xbc00-0xbc3f mem 0xfeafd000-0xfeafdfff irq 20 at device 8.0 on pci2 fxp0: Ethernet address 00:0c:76:26:da:ea miibus1: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: cmd 3 failed at out byte 1 of 3 orm0: <Option ROMs> at iomem 0xe0000-0xe0fff,0xc0000-0xce7ff on isa0 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: CDRW <SAMSUNG CDRW/DVD SM-348B> at ata0-master PIO4 GEOM: create disk ad2 dp=0xc69d7c60 ad2: 38196MB <SAMSUNG SV4002H> [77605/16/63] at ata1-master UDMA100 Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 2 lun 0 sa0: <ECRIX VXA-1 2C8C> Removable Sequential Access SCSI-2 device sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) GEOM: create disk da0 dp=0xc6b9f850 GEOM: create disk da1 dp=0xc6b9fc50 GEOM: create disk da2 dp=0xc6ba3050 da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST336752LW 0004> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687369 512 byte sectors: 255H 63S/T 4462C) da1 at ahc0 bus 0 target 4 lun 0 da1: <SEAGATE ST34501N 0015> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da1: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C) da2 at ahc0 bus 0 target 6 lun 0 da2: < S7Z0> Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/da1s1aReceived on Mon Dec 15 2003 - 20:59:20 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:34 UTC