FWIW - I am running 5.1-RC1 (using an ipfilter-modified kernel) with xmms-esound-1.2.8_2 using the OSS Output Plugin and two soundcards. There are no pings, pops, burps, hiccups, slowdowns, or other interruptions or distortions while listening to MP3's, Amiga MOD's, or locally created WAV's (from another FBSD). cat /dev/sndstat FreeBSD Audio Driver (newpcm) Installed devices: pcm0: <Creative EMU10K1> at io 0xc400 irq 17 (4p/2r/0v channels duplex default) pcm1: <Intel ICH5 (82801EB)> at io 0xfebffa00, 0xfebff900 irq 17 bufsz 16384 (1p/1r/0v channels duplex) kldstat Id Refs Address Size Name 1 11 0xc0400000 5c8628 kernel 2 2 0xc09c9000 1d8cc linux.ko 3 1 0xc09e7000 6e5c snd_emu10k1.ko 4 3 0xc09ee000 1e388 snd_pcm.ko 5 1 0xc0a0d000 5b24 snd_ich.ko 6 1 0xc0a13000 1aea24 nvidia.ko 7 1 0xc0bc2000 4fb50 acpi.ko sysctl -A|grep snd hw.snd.targetirqrate: 32 hw.snd.report_soft_formats: 1 hw.snd.verbose: 1 hw.snd.unit: 0 hw.snd.maxautovchans: 0 hw.snd.pcm0.buffersize: 4096 hw.snd.pcm0.vchans: 0 hw.snd.pcm1.buffersize: 16384 hw.snd.pcm1.vchans: 0 hw.snd.pcm1.ac97rate: 48000 ll /dev/mix* crw-rw-rw- 1 root wheel 30, 0 Dec 17 18:22 /dev/mixer0 crw-rw-rw- 1 root wheel 30, 16 Dec 17 18:22 /dev/mixer1 ll /dev/dsp* crw-rw-rw- 1 root wheel 30, 3 Dec 17 18:38 /dev/dsp0.0 crw-rw-rw- 1 root wheel 30, 0x00010003 Dec 17 18:37 /dev/dsp0.1 crw-rw-rw- 1 root wheel 30, 0x00020003 Dec 17 18:22 /dev/dsp0.2 crw-rw-rw- 1 root wheel 30, 0x00030003 Dec 17 18:22 /dev/dsp0.3 crw-rw-rw- 1 root wheel 30, 0x00040003 Dec 17 18:22 /dev/dsp0.4 crw-rw-rw- 1 root wheel 30, 0x00050003 Dec 17 18:22 /dev/dsp0.5 crw-rw-rw- 1 root wheel 30, 19 Dec 17 19:10 /dev/dsp1.0 crw-rw-rw- 1 root wheel 30, 0x00010013 Dec 17 18:22 /dev/dsp1.1 crw-rw-rw- 1 root wheel 30, 5 Dec 17 18:22 /dev/dspW0.0 crw-rw-rw- 1 root wheel 30, 0x00010005 Dec 17 18:22 /dev/dspW0.1 crw-rw-rw- 1 root wheel 30, 0x00020005 Dec 17 18:22 /dev/dspW0.2 crw-rw-rw- 1 root wheel 30, 0x00030005 Dec 17 18:22 /dev/dspW0.3 crw-rw-rw- 1 root wheel 30, 0x00040005 Dec 17 18:22 /dev/dspW0.4 crw-rw-rw- 1 root wheel 30, 0x00050005 Dec 17 18:22 /dev/dspW0.5 crw-rw-rw- 1 root wheel 30, 21 Dec 17 18:22 /dev/dspW1.0 crw-rw-rw- 1 root wheel 30, 0x00010015 Dec 17 18:22 /dev/dspW1.1 crw-rw-rw- 1 root wheel 30, 11 Dec 17 18:22 /dev/dspr0.0 crw-rw-rw- 1 root wheel 30, 0x0001000b Dec 17 18:22 /dev/dspr0.1 crw-rw-rw- 1 root wheel 30, 27 Dec 17 18:22 /dev/dspr1.0 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RC1 #0: Tue Dec 16 01:06:43 CST 2003 root_at_FreeBSD2.LocalNET10:/usr/src/sys/i386/compile/FBSD5.2_RC2 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c13000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c13244. Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc0c132f0. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0c133a0. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0c1344c. Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0c134f8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c135a4. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3245.47-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073676288 (1023 MB) avail memory = 1029304320 (981 MB) ACPI APIC Table: <AMIINT INTEL875> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT INTEL875> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20 pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f7720 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc2dafac0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc2daf9c0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc2daf9c0), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc2dafac0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc2dc78a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc2dc78a0), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu1: Failed to attach throttling P_CNT acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 16 nvidia0: <GeForce4 Ti 4600> mem 0xdfd80000-0xdfdfffff,0xd0000000-0xd7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1 pci0: <base peripheral> at device 6.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ugen0: APC Back-UPS ES 725 FW:802.n2.D USB FW:n2, rev 1.10/1.06, addr 2 uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcm0: <Creative EMU10K1> port 0xc400-0xc41f irq 17 at device 1.0 on pci2 pcm0: <SigmaTel STAC9708/11 AC97 Codec> ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfeaff000-0xfeafffff irq 18 at device 2.0 on pci2 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xc000-0xc0ff mem 0xfeafe000-0xfeafefff irq 19 at device 3.0 on pci2 sis0: Silicon Revision: DP83815D sis0: Ethernet address: 00:09:5b:1e:62:ec miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xbc00-0xbc3f mem 0xfeafd000-0xfeafdfff irq 20 at device 8.0 on pci2 fxp0: Ethernet address 00:0c:76:26:da:ea miibus1: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm1: <Intel ICH5 (82801EB)> port 0xd800-0xd83f,0xdc00-0xdcff mem 0xfebff900-0xfebff9ff,0xfebffa00-0xfebffbff irq 17 at device 31.5 on pci0 pcm1: <Analog Devices AD1980 AC97 Codec> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: cmd 3 failed at out byte 1 of 3 orm0: <Option ROMs> at iomem 0xe0000-0xe0fff,0xc0000-0xce7ff on isa0 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: CDRW <SAMSUNG CDRW/DVD SM-348B> at ata0-master PIO4 GEOM: create disk ad2 dp=0xc6f8fe60 ad2: 38196MB <SAMSUNG SV4002H> [77605/16/63] at ata1-master UDMA100 Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 2 lun 0 sa0: <ECRIX VXA-1 2C8C> Removable Sequential Access SCSI-2 device sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) GEOM: create disk da0 dp=0xc6f94850 GEOM: create disk da1 dp=0xc6f9ac50 GEOM: create disk da2 dp=0xc6f94450 da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST336752LW 0004> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687369 512 byte sectors: 255H 63S/T 4462C) da1 at ahc0 bus 0 target 4 lun 0 da1: <SEAGATE ST34501N 0015> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da1: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C) da2 at ahc0 bus 0 target 6 lun 0 da2: < S7Z0> Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/da1s1aReceived on Wed Dec 17 2003 - 16:12:27 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:34 UTC