Re: 5.2RC1 Read+Write data corruption (with Seagate Barracuda ATA V 120G (ST3120023A) + VIA 8237)

From: Ion-Mihai Tetcu <itetcu_at_apropo.ro>
Date: Thu, 18 Dec 2003 13:36:01 +0200
I've moved the hardisk to another pc (dmesg at bottom).

Tried to boot from ad0s4a with no luck (same Remove disk or other media.
Press any key to restart. after pressing F4).

Reinstalled 5.2RC1 on that pc on ad0s4 (without touching anything in
fdisk). No errors. Reboot andthe same Remove disk ... message.

Installed on ad0s2 (without touching anything in
fdisk). No errors. 
Reboot. System up ok. Logged in and mount_smbfs ok. 
Shutdonw now.
unmount -a
mount -r -u /
fsck -p ad0s2[d,e,f] - all OK
fsck -n ad0s2d and ad0s2e - all OK

fsck -n ad0s2f:

** /dev/ad0s2f (NO WRITE)
** Last Mounted on /usr
** Phase 1 - Check Blocks and Sizes
INCORRECT BLOCK COUNT I=282698 (544 should be 416)
CORRECT? no

INCORRECT BLOCK COUNT I=282745 (832 should be 416)
CORRECT? no

INCORRECT BLOCK COUNT I=282746 (704 should be 416)
CORRECT? no

INCORRECT BLOCK COUNT I=282757 (544 should be 416)
CORRECT? no

INCORRECT BLOCK COUNT I=282766 (448 should be 416)
CORRECT? no

INCORRECT BLOCK COUNT I=282768 (2176 should be 416)
CORRECT? no

INCORRECT BLOCK COUNT I=282809 (1504 should be 480)
CORRECT? no

INCORRECT BLOCK COUNT I=282956 (576 should be 416)
CORRECT? no

** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? no

SUMMARY INFORMATION BAD
SALVAGE? no

BLK(S) MISSING IN BIT MAPS
SALVAGE? no

17839 files, 119807 used, 14370491 free (13339 frags, 1794644 blocks, 0.1% fragmentation)


fsck -y ad0s2f:
** /dev/ad0s2f
** Last Mounted on /usr
** Phase 1 - Check Blocks and Sizes
INCORRECT BLOCK COUNT I=282698 (544 should be 416)
CORRECT? yes

INCORRECT BLOCK COUNT I=282745 (832 should be 416)
CORRECT? yes

INCORRECT BLOCK COUNT I=282746 (704 should be 416)
CORRECT? yes

INCORRECT BLOCK COUNT I=282757 (544 should be 416)
CORRECT? yes

INCORRECT BLOCK COUNT I=282766 (448 should be 416)
CORRECT? yes

INCORRECT BLOCK COUNT I=282768 (2176 should be 416)
CORRECT? yes

INCORRECT BLOCK COUNT I=282809 (1504 should be 480)
CORRECT? yes

INCORRECT BLOCK COUNT I=282956 (576 should be 416)
CORRECT? yes

** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes

SUMMARY INFORMATION BAD
SALVAGE? yes

BLK(S) MISSING IN BIT MAPS
SALVAGE? yes

17839 files, 119807 used, 14371475 free (13339 frags, 1794767 blocks, 0.1% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****


fsck -n ad0s2f:
** /dev/ad0s2f (NO WRITE)
** Last Mounted on /usr
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
17839 files, 119807 used, 14371475 free (13339 frags, 1794767 blocks, 0.1% fragmentation)


Reboot in single user. fsck -p and fsck OK.
^D

Begin to see errors:
/libexec/ld_elf.so.1: /usr/lib/libwrap.so.3: Invalid file format

Tried to login and 2nd console:
login: root
login in free(): error: chunk is already free
And on the first:
login: in openpam_load_module(): no pam_self.so found
kernel: pid 476()login uid 0: exited on signal 6 (dore dumped)

-----------------------

Any ideas ?
Thanks.

---------

dmesg_acpi_verbose:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RC1 #0: Sun Dec  7 22:15:14 GMT 2003
    root_at_wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2c000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2c1f4.
Calibrating clock(s) ... i8254 clock: 1193362 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1001777027 Hz
CPU: AMD Athlon(tm) processor (1001.78-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000000fb49fff, 250744832 bytes (61217 pages)
avail memory = 251047936 (239 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faef0
bios32: Entry = 0xfb360 (c00fb360)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb390
pnpbios: Found PnP BIOS data at 0xc00fbef0
pnpbios: Entry = f0000:bf20  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VT8363 AWRDACPI> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=03051106)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fde10
PCI-Only Interrupts: 9 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    9    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    7    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    7    D   0x05  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq   0: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
---- before setting priority for links ------------
\\_SB_.PCI0.LNKB:
	interrupts:	     1     3     4     5     6     7    10    11    12    14    15
	penalty:	100770  1770  1770   770  1770  1770  1470  1470  1770 10770 10770
	references:	7
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.LNKB:
	interrupts:	     1     3     4     5     6     7    10    11    12    14    15
	penalty:	100770  1770  1770   770  1770  1770  1470  1470  1770 10770 10770
	references:	7
	priority:	85826
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq   9: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base d0000000, size 25, enabled
found->	vendor=0x1106, dev=0x0305, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x8305, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1106, dev=0x0686, revid=0x40
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000d000, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=7, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000d400, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found->	vendor=0x1106, dev=0x3038, revid=0x1a
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000d800, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found->	vendor=0x1106, dev=0x3038, revid=0x1a
	bus=0, slot=7, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x3057, revid=0x40
	bus=0, slot=7, func=4
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
	map[14]: type 4, range 32, base 0000e000, size  2, enabled
	map[18]: type 4, range 32, base 0000e400, size  2, enabled
pcib0: matched entry for 0.7.INTC (source \\_SB_.PCI0.LNKC)
pcib0: slot 7 INTC is routed to irq 10
found->	vendor=0x1106, dev=0x3058, revid=0x50
	bus=0, slot=7, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000ec00, size  8, enabled
	map[14]: type 1, range 32, base d5000000, size  8, enabled
pcib0: matched entry for 0.13.INTA (source \\_SB_.PCI0.LNKA)
pcib0: slot 13 INTA is routed to irq 11
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=13, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xd0000000-0xd1ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xcfff
pcib1:   memory decode     0xd2000000-0xd3ffffff
pcib1:   prefetched decode 0xd4000000-0xd4ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base d4000000, size 24, enabled
	map[14]: type 4, range 32, base 0000c000, size  8, enabled
	map[18]: type 1, range 32, base d3000000, size 12, enabled
pcib0: matched entry for 0.1.INTA (source \\_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x1002, dev=0x475a, revid=0x7a
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=02 ostat0=ff ostat1=50
ata1-slave:  stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=02 stat0=00 stat1=10 devices=0x8<ATAPI_SLAVE>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 7.5 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xd5000000-0xd50000ff irq 11 at device 13.0 on pci0
rl0: Ethernet address: 00:06:4f:01:ca:84
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed 80
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1001777027 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x10 error=0x01
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C686B chip
ata0-master: setting UDMA100 on VIA 82C686B chip
GEOM: create disk ad0 dp=0xc2dbf360
ad0: <ST3120023A/3.33> ATA-6 disk at ata0-master
ad0: 114472MB (234439535 sectors), 232578 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-slave: setting PIO4 on VIA 82C686B chip
acd0: <TEAC CD-552E/VER T016> CDROM drive at ata1 as slave
acd0: read 689KB/s (8958KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:62910477
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:62910540 l:61432560
[2] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:124343100 l:61432560
[3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:185775660 l:48660885
GEOM: Configure ad0s1, start 32256 length 32210164224 end 32210196479
GEOM: Configure ad0s2, start 32210196480 length 31453470720 end 63663667199
GEOM: Configure ad0s3, start 63663667200 length 31453470720 end 95117137919
GEOM: Configure ad0s4, start 95117137920 length 24914373120 end 120031511039
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2c, start 0 length 31453470720 end 31453470719
GEOM: Configure ad0s2d, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s2e, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0s2f, start 805306368 length 30648164352 end 31453470719
GEOM: Configure ad0s4a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s4b, start 268435456 length 510435328 end 778870783
GEOM: Configure ad0s4c, start 0 length 24914373120 end 24914373119
GEOM: Configure ad0s4d, start 778870784 length 268435456 end 1047306239
GEOM: Configure ad0s4e, start 1047306240 length 268435456 end 1315741695
GEOM: Configure ad0s4f, start 1315741696 length 23598631424 end 24914373119
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
netsmb_dev: loaded



-- 
IOnut
Unregistered ;) FreeBSD user
Received on Thu Dec 18 2003 - 02:35:43 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:34 UTC