On Thu, 18 Dec 2003, Georg-W. Koltermann wrote: I have tested the commit on my presario 900. psm0 is detected no problem. However, dmesg still shows a message about psm0 not being able to allocated an irq. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #3: Thu Dec 18 13:16:28 PST 2003 rjackson_at_localhost:/usr/obj/usr/src/sys/VALA Preloaded elf kernel "/boot/kernel/kernel" at 0xc07d2000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc07d2228. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07d22d4. Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc07d2380. Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc07d2430. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07d2478. Calibrating clock(s) ... i8254 clock: 1193169 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1192626982 Hz CPU: Mobile AMD Athlon(tm) XP 1400+ (1192.63-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 251658240 (240 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000000ea99fff, 237453312 bytes (57972 pages) 0x000000000ef00000 - 0x000000000eff7fff, 1015808 bytes (248 pages) avail memory = 238911488 (227 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6ff0 bios32: Entry = 0xfd760 (c00fd760) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd760+0x11e pnpbios: Found PnP BIOS data at 0xc00f7050 pnpbios: Entry = f0000:9c77 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 ff 00 00 01 0a 01 00 01 20 01 00 01 25 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 55 mode(s) found VESA: v2.0, 16320k memory, flags:0x1, mode table:0xc0755b42 (1000022) VESA: ATI CABO VESA: ATI Technologies Inc. U1 01.00 random: <entropy source> ACPI: DSDT was overridden. ACPI-0374: *** Info: Table [DSDT] replaced by host OS npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cab01002) pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00fdf10 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x59 11 embedded 0 15 A 0x4a 11 embedded 0 8 A 0x4b 5 embedded 0 10 A 0x48 10 11 embedded 0 11 A 0x49 10 11 embedded 0 19 A 0x49 10 11 embedded 0 12 A 0x49 10 11 embedded 0 12 B 0x49 10 11 slot 13 1 5 A 0x49 10 11 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 10 func 0 acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 ACPI timer looks GOOD min = 2, max = 2, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNK8 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.2.0 \\_SB_.PCI0.ISA_.LNK4 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.15.0 \\_SB_.PCI0.ISA_.LNK7 irq 5: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.8.0 \\_SB_.PCI0.ISA_.LNK1 irq 0: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNK3 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.19.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNK3 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.12.1 ---- before setting priority for links ------------ \\_SB_.PCI0.ISA_.LNK1: interrupts: 3 4 5 6 7 10 11 12 penalty: 1110 1110 210 1110 1110 310 510 1110 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.ISA_.LNK1: interrupts: 3 4 5 6 7 10 11 12 penalty: 1110 1110 210 1110 1110 310 510 1110 references: 1 priority: 822 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNK8 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.2.0 \\_SB_.PCI0.ISA_.LNK4 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.15.0 \\_SB_.PCI0.ISA_.LNK7 irq 5: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.8.0 \\_SB_.PCI0.ISA_.LNK1 irq 5: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNK3 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.19.0 \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNK3 irq 11: [ 3 4 5 6 7 10 11 12] low,level,sharable 0.12.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 3, range 32, base f4400000, size 12, enabled map[18]: type 4, range 32, base 00008090, size 2, port disabled found-> vendor=0x1002, dev=0xcab0, revid=0x13 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x700f, revid=0x01 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f4014000, size 12, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.ISA_.LNK8) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 00008400, size 8, enabled map[14]: type 1, range 32, base f4015000, size 12, enabled pcib0: matched entry for 0.8.INTA (source \\_SB_.PCI0.ISA_.LNK7) pcib0: slot 8 INTA is routed to irq 5 found-> vendor=0x10b9, dev=0x5451, revid=0x02 bus=0, slot=8, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0xc290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ffbfe000, size 12, enabled found-> vendor=0x104c, dev=0xac50, revid=0x02 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00008800, size 8, enabled map[14]: type 1, range 32, base f4017800, size 8, enabled pcib0: matched entry for 0.11.INTA (source \\_SB_.PCI0.ISA_.LNK3) pcib0: slot 11 INTA is routed to irq 11 found-> vendor=0x10ec, dev=0x8139, revid=0x20 bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f4000000, size 16, enabled map[14]: type 4, range 32, base 00008098, size 3, enabled pcib0: matched entry for 0.12.INTA (source \\_SB_.PCI0.ISA_.LNK2) pcib0: slot 12 INTA is routed to irq 10 found-> vendor=0x14f1, dev=0x2f00, revid=0x01 bus=0, slot=12, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f4016000, size 12, enabled pcib0: matched entry for 0.15.INTA (source \\_SB_.PCI0.ISA_.LNK4) pcib0: slot 15 INTA is routed to irq 11 found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=15, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00008080, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc4 bus=0, slot=16, func=0 class=01-01-fa, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f4017000, size 11, enabled map[14]: type 1, range 32, base f4010000, size 14, enabled pcib0: matched entry for 0.19.INTA (source \\_SB_.PCI0.ISA_.LNK2) pcib0: slot 19 INTA is routed to irq 10 found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=0, slot=19, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xf4100000-0xf41fffff pcib1: prefetched decode 0xf6000000-0xf7ffffff ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 3 4 5 6 7 10 11 12] low,level,sharable 1.5.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNK2 irq 10: [ 3 4 5 6 7 10 11 12] low,level,sharable 1.5.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f6000000, size 25, enabled map[14]: type 4, range 32, base 00009000, size 8, enabled map[18]: type 1, range 32, base f4100000, size 16, enabled pcib1: matched entry for 1.5.INTA (source \\_SB_.PCI0.ISA_.LNK2) pcib1: slot 5 INTA is routed to irq 10 found-> vendor=0x1002, dev=0x4336, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 5.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf4014000-0xf4014fff irq 11 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xf4015000-0xf4015fff irq 5 at device 8.0 on pci0 pcm0: <Analog Devices AD1886A AC97 Codec (id = 0x41445363)> pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo pcm0: Primary codec extended features variable rate PCM, reserved 1 pcm0: sndbuf_setmap 208000, 1000; 0xc27f4000 -> 208000 pcm0: sndbuf_setmap e826000, 1000; 0xc27f2000 -> e826000 pcm0: sndbuf_setmap 22a000, 1000; 0xc27f6000 -> 22a000 pcm0: sndbuf_setmap e7e4000, 1000; 0xc2810000 -> e7e4000 pcm0: sndbuf_setmap 242000, 1000; 0xc280e000 -> 242000 cbb0: <TI1410 PCI-CardBus Bridge> mem 0xffbfe000-0xffbfefff at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNK1) pcib0: slot 10 INTA is routed to irq 5 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac50104c 0x02100007 0x06070002 0x00022000 0x10: 0xffbfe000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400105 0x40: 0x00b00e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x40649061 0x00000000 0x00000000 0x01001002 0x90: 0x616482c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00100 0x00000000 0x0000001f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 re0: <RealTek 8139C+ 10/100BaseTX> port 0x8800-0x88ff mem 0xf4017800-0xf40178ff irq 11 at device 11.0 on pci0 re0: Ethernet address: 00:08:02:d0:21:4e miibus0: <MII bus> on re0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: bpf attached pci0: <simple comms> at device 12.0 (no driver attached) ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf4016000-0xf4016fff irq 11 at device 15.0 on pci0 usb1: OHCI version 1.0, legacy support usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f at device 16.0 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached) pci0: <serial bus, FireWire> at device 19.0 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) sio0: irq maps: 0x1 0x9 0x1 0x1 sio0 port 0x2f8-0x2ff irq 3 drq 3 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdf000-0xdffff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 53 9f 9e 1f 00 4f 0d 0e 00 00 07 80 91 83 8f 28 1f 8f 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 53 9f 9e 1f 00 4f 0d 0e 00 00 07 80 91 83 8f 28 1f 8f 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1192626982 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_ec0: info: new max delay is 3 us acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: Notify 0x0 ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on AcerLabs Aladdin chip ata0-master: setting UDMA100 on AcerLabs Aladdin chip GEOM: create disk ad0 dp=0xc283c960 ad0: <FUJITSU MHR2030AT/53BB> ATA-6 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=4<ABORTED> LBA=0 ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=4<ABORTED> LBA=0 ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on AcerLabs Aladdin chip acd0: <Compaq DVD-ROM GDR-8081N/0009> DVDROM drive at ata1 as master acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:29302497 [1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:29302560 l:29302560 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 15002878464 end 15002910719 GEOM: Configure ad0s2, start 15002910720 length 15002910720 end 30005821439 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 380936192 end 649371647 GEOM: Configure ad0s2c, start 0 length 15002910720 end 15002910719 GEOM: Configure ad0s2d, start 649371648 length 268435456 end 917807103 GEOM: Configure ad0s2e, start 917807104 length 268435456 end 1186242559 GEOM: Configure ad0s2f, start 1186242560 length 13816668160 end 15002910719 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init acpi_ec0: info: new max delay is 66 us Linux ELF exec handler installed linprocfs registered -- Russell A. Jackson (rjackson_at_cserv62.csub.edu)Received on Thu Dec 18 2003 - 14:11:41 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:34 UTC