whoops forgot to mention I'm using an Adaptec 2940UW (not U2W), firmware at 3.10.0: ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x7800-0x78ff mem 0xf2eff000-0xf2efffff irq 9 at device 16.0 on pci0 ahc0: Defaulting to MEMIO on ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable is present ahc0: external cable is present ahc0: BIOS eeprom is present ahc0: Downloading Sequencer Program... 449 instructions downloaded ahc0: Features 0x10005, Bugs 0x25, Flags 0x20485040 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBsReceived on Fri Dec 19 2003 - 07:50:02 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:34 UTC