On 22-Dec-2003 Peter Schultz wrote: > John Baldwin wrote: >> On 05-Nov-2003 Peter Schultz wrote: >> >>>I have a Tyan S1832DL w/dual pii 350s and it's not able to boot. Seems >>>to be having trouble with my adaptec scsi controller, I get a whole >>>bunch of output like this hand transcribed bit, it comes after "waiting >>>15 seconds for scsi devices to settle": >>> >>>ahc0 timeout SCB already complete interrupts may not be functioning >>>Infinite interrupt loop INTSTAT=0(probe3:ahc0:0:3:0): SCB 0x6 - timed out >>> >>>Anyone else seeing this? There are probably 100+ related lines of >>>output, I'll have to configure serial debugging if you need to see it. >> >> >> The dmesg output excluding all the ahc0 errors would help figure out >> why your interrupts aren't working. However, I just committed a patch >> that might fix your problem. >> > Here is the output I was able to capture: Disable ACPI for now. It looks like you have a buggy BIOS. Can you put your ASL up at a URL somewhere? -- John Baldwin <jhb_at_FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/Received on Mon Dec 22 2003 - 09:40:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:35 UTC