thinkpad t40p system as of 30th kernel source as of a few mins ago could someone explain to me some strange (to me) messages in boot? marked with "<<<<< *****************" thanks randy --- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #2: Wed Dec 31 06:50:57 PST 2003 root_at_roam.psg.com:/usr/obj/usr/src/sys/ROAM Preloaded elf kernel "/boot/kernel/kernel" at 0xc0798000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0798244. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07982f0. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1600MHz (1594.83-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 1073086464 (1023 MB) avail memory = 1044770816 (996 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 15 entries at 0xc00fdea0 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:29 INTA BIOS irq 11 <<<<< **************** pci_cfgintr: 0:29 INTB BIOS irq 11 pci_cfgintr: 0:29 INTC BIOS irq 11 pci_cfgintr: 0:29 INTD BIOS irq 11 pci_cfgintr: 0:31 INTB BIOS irq 11 pci_cfgintr: 0:31 INTB BIOS irq 11 pci_cfgintr: 0:31 INTB BIOS irq 11 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci_cfgintr: 1:0 INTA BIOS irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ugen0: Actiontec Electronics product 0x0441, rev 1.10/5.46, addr 2 pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pci_cfgintr: 2:0 INTA BIOS irq 11 <<<<< **************** pci_cfgintr: 2:0 INTB BIOS irq 11 pci_cfgintr: 2:1 INTA BIOS irq 11 pci_cfgintr: 2:2 INTA BIOS irq 11 cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 start (b0000000) < sc->membase (c0200000) start (b0000000) < sc->pmembase (e8000000) cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2 start (b1000000) < sc->membase (c0200000) start (b1000000) < sc->pmembase (e8000000) cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x8000-0x803f mem 0xc0200000-0xc020ffff,0xc0220000-0xc023ffff irq 11 at device 1.0 on pci2 em0: Speed:N/A Duplex:N/A ath0: <Atheros 5211> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2 ath0: mac 4.2 phy 3.0 5ghz radio 1.7 2ghz radio 2.3 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 802.11 address: 00:05:4e:41:ee:cd isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xc0000-0xcffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 ppc0: cannot reserve I/O port range <<<<< **************** sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A unknown: <PNP0303> can't assign resources (port) <<<<< **************** unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0680> can't assign resources (port) unknown: <PNP0680> can't assign resources (port) unknown: <IBM0057> can't assign resources (irq) unknown: <IBM0071> can't assign resources (port) ppc1: <Standard parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default GEOM: create disk ad0 dp=0xc5e23d60 ad0: 54164MB <HTS726060M9AT00> [110048/16/63] at ata0-master UDMA100 acd0: CDRW <UJDA745 DVD/CDRW> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s3a link_elf: symbol cdevsw_add undefined <<<<< **************** link_elf: symbol linux_ioctl_register_handler undefined <<<<< **************** -30-Received on Wed Dec 31 2003 - 06:47:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:36 UTC