It seems that the ata driver still has some issues with configuring the RAID devices. Sources cvsupped today. Pete Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #11: Mon Jul 14 12:22:00 GMT 2003 root_at_kompak.vuokselantie10.fi:/usr/src/sys/i386/compile/EMTEST Preloaded elf kernel "/boot/kernel/kernel" at 0xc04d7000. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 598009854 Hz CPU: Intel Celeron (598.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 267386880 (255 MB) avail memory = 254500864 (242 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00e8790 pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:2 INTA BIOS irq 5 pci_cfgintr: 0:31 INTD BIOS irq 11 pci_cfgintr: 0:31 INTB BIOS irq 9 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0x40700000-0x4077ffff,0x44000000-0x47ffffff irq 5 at device 2.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib1 pci_cfgintr: 2:8 INTA BIOS irq 5 pci_cfgintr: 2:8 INTB BIOS irq 9 pci_cfgintr: 2:9 INTA BIOS irq 9 pci_cfgintr: 2:10 INTA BIOS irq 10 pci2: <network, ethernet> at device 8.0 (no driver attached) pci2: <network, ethernet> at device 8.1 (no driver attached) atapci0: <Promise PDC20619 UDMA133 controller> port 0x1080-0x10ff,0x1480-0x148f,0x1000-0x107f mem 0x40200000-0x4021ffff,0x40400000-0x40400fff irq 9 at device 9.0 on pci2 ata2: at 0x40400000 on atapci0 ata3: at 0x40400000 on atapci0 ata4: at 0x40400000 on atapci0 ata5: at 0x40400000 on atapci0 atapci1: <Promise PDC20269 UDMA133 controller> port 0x1490-0x149f,0x14b4-0x14b7,0x14a8-0x14af,0x14b0-0x14b3,0x14a0-0x14a7 mem 0x40300000-0x40303fff irq 10 at device 10.0 on pci2 ata6: at 0x14a0 on atapci1 ata7: at 0x14a8 on atapci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci2: <Intel ICH UDMA66 controller> port 0x2460-0x246f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci2 ata1: at 0x170 irq 15 on atapci2 uhci0: <Intel 82801AA (ICH) USB controller> port 0x2440-0x245f irq 11 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <multimedia, audio> at device 31.5 (no driver attached) orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xd1800-0xd3fff,0xca000-0xd17ff,0xc0000-0xc9fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc1: parallel port not found. unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) Timecounters tick every 10.000 msec ad4: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata2-master UDMA100 ad6: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata3-master UDMA100 ad8: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata4-master UDMA100 ad12: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata6-master UDMA100 ar0: 76319MB <ATA RAID1 array> [9729/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad8 at ata4-master ar1: WARNING - mirror lost ar1: 76319MB <ATA RAID1 array> [9729/255/63] status: DEGRADED subdisks: disk0 READY on ad6 at ata3-master disk1 DOWN no device found for this disk ar2: WARNING - mirror lost ar2: 76319MB <ATA RAID1 array> [9729/255/63] status: DEGRADED subdisks: disk0 DOWN no device found for this disk disk1 READY on ad12 at ata6-master Opened disk ad4 -> 1 Opened disk ad4 -> 1 Opened disk ad4 -> 1 Opened disk ad4 -> 1 Opened disk ad6 -> 1 Opened disk ad6 -> 1 Opened disk ad8 -> 1 Opened disk ad8 -> 1 Opened disk ad12 -> 1 Opened disk ad12 -> 1 Fatal trap 12: page fault while in kernel mode fault virtual address = 0x10 fault code = supervisor read, page not present instruction pointer = 0x8:0xc0161106 stack pointer = 0x10:0xcd22ebd4 frame pointer = 0x10:0xcd22ec54 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 4 (g_down) kernel: type 12 trap, code=0 Stopped at arstrategy+0x906: movl 0x10(%eax),%eax db> trace arstrategy(c26a42d0,0,c0393b57,5c,0) at arstrategy+0x906 g_disk_start(c26a4360,0,c03940be,159,a) at g_disk_start+0x19e g_io_schedule_down(c0ead000,2,c039428f,6e,c01d9390) at g_io_schedule_down+0x19c g_down_procbody(0,cd22ed48,c0395fd6,312,14ec8353) at g_down_procbody+0x48 fork_exit(c01d9390,0,cd22ed48) at fork_exit+0xc0 fork_trampoline() at fork_trampoline+0x1a --- trap 0x1, eip = 0, esp = 0xcd22ed7c, ebp = 0 --- db>Received on Mon Jul 14 2003 - 05:21:20 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:15 UTC