Now after resetting the machine which was hung by "sysinstall" it claims that ad4 (one of two mirrored 30GB 2.5" disks" was absent (see dmesg below) Now the controller warns me that one drive is bad (which in fact is definatley not) and allows me to select "continue boot" That's what I do and after kernel probing the machine reboots with the folowing error (well, this takes some time to typewrite it from my monchrome screen): Fatal trap 12: page fault while in kernel mode fault virtual address = 0x10 fault code= supervisor read, page not present instruction pinter= 0x8:0xc014a0a6 stack pointer= 0x10:0xcce65bd8 frame pointer= 0x10:0xcce65c58 code segment = base 0x0, limit 0xfffff type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL=0 current process = 4(g_down) trap number = 12 panic: page fault Then it reboots! Now please give me a hint what to do. This is my brand new fileserver which collected all improtant data from the last decade and since it's brand new I didn't manage any backup. When testing the hardware (unplugging one drive while the machine was running) I had the same error but I thought that would never happen under normal circumstances. If sysinstall breakes a RAID1 server 5.1-RELEASE should be immediately replaced by a corrected version!!!!! (Controller is a Dawicontrol DC-100 with HPT372 chipset and 2.343 BIOS, the original 2.34 BIOS didn't work at all with FreeBSD (while it did with Windows98)) The machine is the ######## VIA Fileserver######## like dmesg'ed below Best regards, -Harry P.S: Now it has not only ad6 in the following message but also ad4 (and that always has been the reason for the panic during my testings!) (watch out the four ad4 and only two ad6) Opened disk ad4 -> 1 Opened disk ad4 -> 1 Opened disk ad4 -> 1 Opened disk ad4 -> 1 Opened disk ad6 -> 1 Opened disk ad6 -> 1 > Dear all, > > I'm experimenting with 5.1-REL for some weeks and during that time I had > some mysterious hangs which I didn't take serious because I modified > /usr/src/sys/cam/scsi/scsi_da.c to support my CF-Card-Reader. > But now I saw exactly the same problem on my brand new (and cosidered by > hardware extremely different) fileserver. > > The machine freezes for about one minute and then reboots itself > withut any > error message. > It happens when I do a "/stand/sysinstall" or a "sysctl -a" > > This is VERY ugly because when my fileserver dies my workstation also died > (home was nfs-mounted) > > I'm no developer, but if someone tells me what to do I'll help > solving that > BUG. > > Here is some info about my two machines (which are running 5.1-release and > showed the same bug): > > ######## VIA FIleserver ############ > > FreeBSD 5.1-RELEASE #2: Fri Jul 4 14:02:06 CEST 2003 > root_at_tek.flintsbach.schmalzbauer.de:/usr/obj/usr/src/sys/EPIA > Preloaded elf kernel "/boot/kernel/kernel" at 0xc04c0000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04c01f4. > Timecounter "i8254" frequency 1192944 Hz > Timecounter "TSC" frequency 800032401 Hz > CPU: VIA C3 Samuel 2 (800.03-MHz 686-class CPU) > Origin = "CentaurHauls" Id = 0x67a Stepping = 10 > Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX> > real memory = 266272768 (253 MB) > avail memory = 253374464 (241 MB) > VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc00c8ac8 (c0008ac8) > VESA: Copyright 1998 TRIDENT MICROSYSTEMS INC. > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <VIA601 AWRDACPI> on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 5 entries at 0xc00fdc70 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-safe" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 > acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port > 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcf > f on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device > 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 8231 UDMA100 controller> port 0xc000-0xc00f at > device 17.1 on > pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 5 at device 17.2 > on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 5 at device 17.3 > on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pci0: <bridge, PCI-unknown> at device 17.4 (no driver attached) > pcm0: <VIA VT82C686A> port > 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff irq 12 > at device 17.5 on pci0 > pcm0: <VIA Technologies VIA1612A AC97 Codec> > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem > 0xd8000000-0xd80000ff irq 10 at device 18.0 on pci0 > vr0: Ethernet address: 00:40:63:c2:9d:af > miibus0: <MII bus> on vr0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > atapci1: <HighPoint HPT372 UDMA133 controller> port > 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xd > c07 irq 11 > at device 20.0 on pci0 > ata2: at 0xdc00 on atapci1 > ata3: at 0xe400 on atapci1 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > orm0: <Option ROMs> at iomem > 0xd0000-0xd9fff,0xcc000-0xcffff,0xc0000-0xcbfff > on isa0 > pmtimer0 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <12 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% > ad6: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata3-master UDMA100 > acd0: MODE_SENSE_BIG trying to write on read buffer > acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04 > acd0: CDROM <CD-224E> at ata1-slave PIO4 > ar0: WARNING - mirror lost > ar0: 28615MB <ATA RAID1 array> [3647/255/63] status: DEGRADED subdisks: > disk0 READY on ad6 at ata3-master > Opened disk ad6 -> 1 > Opened disk ad6 -> 1 > Opened disk ad6 -> 1 > Opened disk ad6 -> 1 > Mounting root from ufs:/dev/ar0s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > > > ######### Intel Workstation ################## > > FreeBSD 5.1-RELEASE #2: Tue Jul 8 01:08:36 CEST 2003 > harry_at_cale.flintsbach.schmalzbauer.de:/usr/obj/usr/src/sys/CALE > Preloaded elf kernel "/boot/kernel/kernel" at 0xc04c7000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04c721c. > Timecounter "i8254" frequency 1193267 Hz > Timecounter "TSC" frequency 737075599 Hz > CPU: Intel Pentium III (737.08-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE > ,MCA,CMOV, > PAT,PSE36,MMX,FXSR,SSE> > real memory = 267300864 (254 MB) > avail memory = 254337024 (242 MB) > Pentium Pro MTRR support enabled > VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03f8922 (1000022) > VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS CUSL2 > on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 10 entries at 0xc00f1360 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-safe" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem > 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port > 0xd800-0xd83f > mem 0xf6000000-0xf601ffff,0xf6800000-0xf6800fff irq 9 at device > 10.0 on pci1 > fxp0: Ethernet address 00:02:b3:89:e5:55 > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pcm0: <Creative CT5880-C> port 0xd400-0xd43f at device 13.0 on pci1 > pcm0: <SigmaTel STAC9708/11 AC97 Codec> > pcib1: slot 13 INTA is routed to irq 10 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f > irq 7 at device 31.2 on pci0 > usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 2, > iclass 3/1 > ums0: 5 buttons and Z dir. > ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 > at device 31.3 on pci0 > smbus0: <System Management Bus> on ichsmb0 > smb0: <SMBus generic I/O> on smbus0 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f > irq 9 at device 31.4 on pci0 > usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 > uhub2: 4 ports with 4 removable, self powered > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > orm0: <Option ROMs> at iomem > 0xd0000-0xd17ff,0xcc000-0xcffff,0xc0000-0xcbfff > on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <12 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% > ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100 > acd0: CDROM <SONY CDU4811> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Tue Jul 15 2003 - 16:47:42 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:15 UTC