Hi, "camcontrol inquiry" requires the pass driver, so if it's not already in your kernel config you might want to add it when/if you add DA_OLD_QUIRKS. Regards, > Andre Guibert de Bruet | Enterprise Software Consultant > > Silicon Landmark, LLC. | http://siliconlandmark.com/ > On Mon, 28 Jul 2003, Nate Lawson wrote: > I have committed code to disable the USB and Firewire quirks in da(4). > Since we now have code that should handle the common case of a failure > after receiving 6 byte commands, most of them should no longer be > necessary. However, the only way to tell if a quirk is really needed is > to test the new code with the quirks disabled. You may have a device (USB > camera, pen drive, hard drive, ...) that begins to get errors like "BBB > bulk-in clear stall failed" or "Synchronize cache failed, status 0x35". > If you get these, you can enable previous behavior by adding: > > options DA_OLD_QUIRKS > > to your kernel config and recompiling. Once you do this, please send me > the output of "camcontrol inquiry da0" so I can re-enable your quirk for > good. I'm doing this as soon as possible so the unnecessary quirks can be > removed for 5.2. A similar process will take place in 4-stable after 5.2 > has been released.Received on Mon Jul 28 2003 - 20:26:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:16 UTC