Re: [acpi-jp 2302] s4bios

From: Andrea Campi <andrea_at_webcom.it>
Date: Thu, 5 Jun 2003 11:09:30 +0200
On Tue, Jun 03, 2003 at 05:32:05PM +0200, Mark Santcroos wrote:
> Is there anyone that has succesfully used "acpiconf -s 4"?
> 
> I'm very interested in your reports. If you haven't tried yet, but are
> willing to help me, please report me your findings.
> 

Works for me - although it does some weird things.
First, is the acpi_printcpu() normal, something I did, or is it triggered by some BIOS
bug^Wfeature?

Second, on resume the screen isn't refreshed, instead, the BIOS screen with the progress bar
is shown. Switching consoles doesn't help, starting and quitting X does give me back my screen.
Also, the network card loses its IP address and dhclient doesn't seem to get a new one, I didn't
investigate further, see below if interested.

Third, the suspend led keeps blinking but this is a very, very minor detail. ;-)


Bye,
	Andrea


Thinkpad 570E

hw.acpi.supported_sleep_state: S1 S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 0
hw.acpi.s4bios: 1
hw.acpi.verbose: 1



[suspend]
ep0: detached
======== acpi_printcpu() debug dump ========
gdt[0077:c03c13a0] idt[0407:c03c1740] ldt[0028] tr[0020] efl[00000082]
eax[00021000] ebx[c0d2f780] ecx[c083a7e0] edx[bfc00084]
esi[00000000] edi[c2388ab0] ebp[cbd49ab0] esp[cbd49a78]
cr0[8005003b] cr2[280b49ec] cr3[0585d000] cr4[00000691]
cs[0008] ds[0010] es[0010] fs[0018] gs[002f] ss[0010]

[resume]

======== acpi_printcpu() debug dump ========
gdt[0077:c03c13a0] idt[0407:c03c1740] ldt[0028] tr[0020] efl[00000002]
eax[00000001] ebx[c0d2f780] ecx[00008000] edx[c2320980]
esi[00000000] edi[c2388ab0] ebp[cbd49ab0] esp[cbd49a78]
cr0[8005003b] cr2[280b49ec] cr3[0585d000] cr4[00000691]
cs[0008] ds[0010] es[0010] fs[0018] gs[002f] ss[0010]
ata0: resetting devices ..
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
done
ata1: resetting devices ..
done
ep0: <3Com Corporation 3C589D> at port 0x100-0x10f irq 11 function 0 config 1 on pccard1
ep0: Ethernet address 00:60:08:94:d3:98

dhclient: DHCPRELEASE on ep0 to 213.92.1.1 port 67
dhclient: send_packet: No route to host
dhclient: Disabling output on BPF/ep0/00:60:08:94:d3:98
dhclient: Disabling input on BPF/ep0/00:60:08:94:d3:98
dhclient: receive_packet failed on ep0: No route to host

acpi_tz0: _AC0: temperature 6280.3 >= setpoint 69.0
acpi_tz0: switched from NONE to _AC0: 6280.3C
acpi_tz0: WARNING - current temperature (6280.3C) exceeds system limits



acpi_cmbat0: battery initialization failed, giving up
acpi_cmbat1: battery initialization failed, giving up


-- 
            Yes, I've heard of "decaf." What's your point?
Received on Thu Jun 05 2003 - 00:09:35 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:10 UTC