Re: 5.0/5.1: Installer does not find CD-ROM drive - even though it's booted off it

From: <none_NOSPAM_at_siu.edu>
Date: Tue, 10 Jun 2003 21:19:08 -0500 (CDT)
FWIW - I have a Samsung SM-348 48x CD/DVD combo unit that works just
fine under 5.1 (and 4.8):

acd0: CD-RW <SAMSUNG CDRW/DVD SM-348B> at ata0-master PIO4


On 10 Jun, Vitaly Markitantov wrote:
> On Mon, Jun 09, 2003 at 10:20:03PM +0200, Per von Zweigbergk wrote:
>> Hello.
>> 
>> I'm having difficulty with the ISO image of FreeBSD 5.1. The same 
>> problem also appeared in 5.0, but since 5.1 had come out, I decided to 
>> try that before reporting this bug.
>> 
>> When booting the installer off the CD-ROM and doing a Standard install, 
>> you first get to the stage of partitioning a hard drive.
>> 
>> Then you get to the stage where distributions are chosen.
>> 
>> After that, it wants you to choose install media. I choose CD/DVD, and 
>> suddenly it says:
>> 
>> "No CD/DVD devices found!"
>> 
>> This is strange, since I clearly have been able to boot from it, and 
>> the boot loader seems to find it.
>> 
>> On a whim, I also tried to choose "Floppy" for the install, but that 
>> didn't work either:
>> 
>> "No floppy devices found!"
>> 
>> This is more than strange. It's truly bizarre.
>> 
>> In the boot loader it says:
>> 
>> BIOS CD is cd0
>> BIOS drive A: is disk0
>> BIOS drive C: is disk1
>> 
>> And just before it dumps into /stand/sysinstall, I get:
>> 
>> ata1-master: timeout waiting for interrupt
>> ata1-master: ATAPI identify failed
>> 
>> The system is new, and has had no OS installed on it previously. I have 
>> upgraded the BIOS to the latest version.
>> 
>> Specifications:
>> 
>> - Microstar 865PE Neo2 LS mother board
>> - 3 x Intel 10/100 Desktop Adapter S cards. (Supported by the fxp 
>> driver)
>> - Cheap Geforce 4 MX based AGP graphics card
>> - Western Digital Special Edition 120 GB hard drive with 8 MB disk 
>> cache connected using the onboard ATA100 functionality. Master on the 
>> first IDE bus.
>> - Samsung CD-ROM drive connected to the second IDE bus as Master. Only 
>> does ATA33 with the cables I use.
> 
>  Looks like Samsung 52X CD-ROM is broken for FreeBSD, i have this problem
>  with this drive, when i replace it to Asus 52X CD-ROM, all works fine.
> 
> 
Received on Tue Jun 10 2003 - 17:19:50 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:11 UTC