Hello, i have heavy trouble getting _ANY_ *bsd or linux working on my notebook. In fact every installation attempt failed so far but only FreeBSD 5.1 was able to boot on this box (really i tried openbsd 3.3, netbsd 1.6.1, freebsd 4.8, knoppix 3.2, all crash when trying to access the cd-rom drive, only freebsd is smart enuff to get it to work using PIO4). I have installed it and it runs fine so far. Only 2 things are not working: the Cisco MiniPCI 350 wlan card (crashes when activating the interface) and the SIS7012 ac'97 sound (crashes when i load the module and try to play something). After days of experimenting around i found out that no miniPCI wlan card works and just causes a systemcrash when trying to activate it. I found out too that, when no MiniPCI card is installed, the sound works perfectly. In /var/log/messages i often get a message 'stray interrupt 7'. I tryed several kernels, tryed to load the Cisco driver as modules instead on compiling into the kernel, really have hours of messing-around-with-kernel-config, and nothing worked :( Its a Elitegroup G732 based Notebook (sold as Gericom Masterpiece, Vobis M9 ...), featuring the SIS645DX chipset, mobile Radeon 9000 ... Im really trying hard to get rid of windows :/ So if you have any hints for me, please post ... notebook without wlan & sound isnt any fun ... thanks in advance. ACPI debug layer 0x0 debug level 0x0 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Fri Jun 20 17:05:21 GMT 2003 root_at_smoke.phibes.net:/usr/src/sys/i386/compile/MYONE_NEW_13 Preloaded elf kernel "/boot/kernel/kernel" at 0xc051b000. Calibrating clock(s) ... i8254 clock: 1193124 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz Calibrating TSC clock ... TSC clock: 2141106812 Hz Timecounter "TSC" frequency 2141106812 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2141.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 534708224 (509 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000542000 - 0x000000001f4d2fff, 519639040 bytes (126865 pages) avail memory = 513798144 (489 MB) bios32: Found BIOS32 Service Directory header at 0xc00f69c0 bios32: Entry = 0xfd880 (c00fd880) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd880+0x138 pnpbios: Found PnP BIOS data at 0xc00f6a20 pnpbios: Entry = f0000:a964 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 04 00 01 19 01 00 01 2f 01 00 01 34 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 55 mode(s) found VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc0484c22 (1000022) VESA: ATI MOBILITY RADEON 9000 VESA: ATI Technologies Inc. M9 01.00 acpi0: <PTLTD RSDT > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06461039) pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdf40 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 5 A 0x43 3 4 5 9 10 11 15 slot 1 0 5 B 0x44 3 4 5 9 10 11 15 slot 2 0 6 A 0x44 3 4 5 9 10 11 15 embedded 0 10 A 0x42 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x41 3 4 5 6 9 10 11 15 embedded 0 1 B 0x42 3 4 5 6 9 10 11 15 embedded 0 2 A 0x41 3 4 5 9 10 11 15 embedded 0 2 B 0x42 3 4 5 9 10 11 15 embedded 0 2 C 0x43 3 4 5 9 10 11 15 embedded 0 2 D 0x44 3 4 5 9 10 11 15 embedded 0 3 A 0x60 3 4 5 9 10 11 15 embedded 0 3 B 0x61 3 4 5 9 10 11 15 embedded 0 3 C 0x62 3 4 5 9 10 11 15 embedded 0 3 D 0x63 3 4 5 9 10 11 15 embedded 0 4 A 0x44 3 4 5 9 10 11 15 AcpiOsDerivePciId: bus 0 dev 2 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 4, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 AcpiOsDerivePciId: bus 0 dev 0 func 0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.LPC_.LNKA irq 4: [ 5 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LPC_.LNKB irq 0: [ 3 4 5 7 9 10 11] low,level,sharable 0.1.1 \\_SB_.PCI0.LPC_.LNKA irq 4: [ 5 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LPC_.LNKB irq 0: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.1 \\_SB_.PCI0.LPC_.LNKC irq 11: [ 3 4 5 9 10 11] low,level,sharable 0.2.2 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.3 \\_SB_.PCI0.LPC_.LNKE irq 9: [ 4 5 10 11] low,level,sharable 0.3.0 \\_SB_.PCI0.LPC_.LNKF irq 11: [ 4 5 10 11] low,level,sharable 0.3.1 \\_SB_.PCI0.LPC_.LNKG irq 10: [ 4 5 10 11] low,level,sharable 0.3.2 \\_SB_.PCI0.LPC_.LNKH irq 5: [ 4 5 10 11] low,level,sharable 0.3.3 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.4.0 \\_SB_.PCI0.LPC_.LNKC irq 11: [ 3 4 5 9 10 11] low,level,sharable 0.5.0 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.5.1 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.6.0 \\_SB_.PCI0.LPC_.LNKB irq 0: [ 3 4 5 7 9 10 11] low,level,sharable 0.10.0 ---- before setting priority for links ------------ \\_SB_.PCI0.LPC_.LNKB: interrupts: 3 4 5 7 9 10 11 penalty: 1330 1530 430 1330 830 430 630 references: 3 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.PCI0.LPC_.LNKB: interrupts: 3 4 5 7 9 10 11 penalty: 1330 1530 430 1330 830 430 630 references: 3 priority: 2790 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.LPC_.LNKA irq 4: [ 5 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LPC_.LNKB irq 10: [ 3 4 5 7 9 10 11] low,level,sharable 0.1.1 \\_SB_.PCI0.LPC_.LNKA irq 4: [ 5 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LPC_.LNKB irq 10: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.1 \\_SB_.PCI0.LPC_.LNKC irq 11: [ 3 4 5 9 10 11] low,level,sharable 0.2.2 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.2.3 \\_SB_.PCI0.LPC_.LNKE irq 9: [ 4 5 10 11] low,level,sharable 0.3.0 \\_SB_.PCI0.LPC_.LNKF irq 11: [ 4 5 10 11] low,level,sharable 0.3.1 \\_SB_.PCI0.LPC_.LNKG irq 10: [ 4 5 10 11] low,level,sharable 0.3.2 \\_SB_.PCI0.LPC_.LNKH irq 5: [ 4 5 10 11] low,level,sharable 0.3.3 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.4.0 \\_SB_.PCI0.LPC_.LNKC irq 11: [ 3 4 5 9 10 11] low,level,sharable 0.5.0 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.5.1 \\_SB_.PCI0.LPC_.LNKD irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.6.0 \\_SB_.PCI0.LPC_.LNKB irq 10: [ 3 4 5 7 9 10 11] low,level,sharable 0.10.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base e0000000, size 27, enabled found-> vendor=0x1039, dev=0x0646, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0001, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0008, revid=0x04 bus=0, slot=2, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base e8000000, size 12, memory disabled found-> vendor=0x1039, dev=0x7007, revid=0x00 bus=0, slot=2, func=3 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001000, size 4, enabled found-> vendor=0x1039, dev=0x5513, revid=0x00 bus=0, slot=2, func=5 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 00001400, size 8, port disabled map[14]: type 4, range 32, base 00001080, size 7, enabled found-> vendor=0x1039, dev=0x7012, revid=0xa0 bus=0, slot=2, func=7 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=c, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8001000, size 12, enabled pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.LPC_.LNKE) pcib0: slot 3 INTA is routed to irq 9 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=9 map[10]: type 1, range 32, base e8002000, size 12, enabled pcib0: matched entry for 0.3.INTB (source \\_SB_.PCI0.LPC_.LNKF) pcib0: slot 3 INTB is routed to irq 11 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=11 map[10]: type 1, range 32, base e8003000, size 12, enabled pcib0: matched entry for 0.3.INTC (source \\_SB_.PCI0.LPC_.LNKG) pcib0: slot 3 INTC is routed to irq 10 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=10 map[10]: type 1, range 32, base e8004000, size 12, memory disabled pcib0: matched entry for 0.3.INTD (source \\_SB_.PCI0.LPC_.LNKH) pcib0: slot 3 INTD is routed to irq 5 found-> vendor=0x1039, dev=0x7002, revid=0x00 bus=0, slot=3, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000e000, size 8, enabled map[14]: type 1, range 32, base e8005000, size 12, enabled pcib0: matched entry for 0.4.INTA (source \\_SB_.PCI0.LPC_.LNKD) pcib0: slot 4 INTA is routed to irq 9 found-> vendor=0x1039, dev=0x0900, revid=0x91 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, port disabled map[14]: type 1, range 32, base e8008000, size 14, memory disabled map[18]: type 1, range 32, base e8400000, size 22, enabled pcib0: matched entry for 0.5.INTA (source \\_SB_.PCI0.LPC_.LNKC) pcib0: slot 5 INTA is routed to irq 11 found-> vendor=0x14b9, dev=0xa504, revid=0x00 bus=0, slot=5, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0018, statreg=0x0090, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.LPC_.LNKB) pcib0: slot 10 INTA is routed to irq 10 found-> vendor=0x1524, dev=0x1410, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 128M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xe8800000-0xe88fffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 4, range 32, base 00009000, size 8, enabled map[18]: type 1, range 32, base e8800000, size 16, enabled pcib0: matched entry for 0.1.INTA (source \\_SB_.PCI0.LPC_.LNKA) pcib0: slot 1 INTA is routed to irq 4 pcib1: slot 0 INTA is routed to irq 4 found-> vendor=0x1002, dev=0x4c66, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0283, statreg=0x02b0, cachelnsz=4 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0x9000-0x90ff mem 0xe8800000-0xe880ffff,0xf0000000-0xf7ffffff irq 4 at device 0.0 on pci1 [drm:radeon_init] [drm:radeon_agp_init] agp_available = 1 info: [drm] AGP at 0xe0000000 128MB [drm:radeon_ctxbitmap_next] drm_ctxbitmap_next bit : 0 [drm:radeon_ctxbitmap_init] drm_ctxbitmap_init : 0 info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 fwohci0: vendor=1039, dev=7007 fwohci0: <1394 Open Host Controller Interface> mem 0xe8000000-0xe8000fff at device 2.3 on pci0 fwohci0: latency timer 64 -> 64. fwohci0: cache size 0 -> 8. pcib0: matched entry for 0.2.INTB (source \\_SB_.PCI0.LPC_.LNKB) pcib0: slot 2 INTB is routed to irq 10 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:50:eb:1d:00:00:22:d5 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xf864a002 -> 0xf864a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP2/SCSI over firewire> on firewire0 sbp_attach (cold=1) if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:50:eb:00:22:d5 fwe0: bpf attached fwohci0: Initiate bus reset fwohci0: fwphy_rddata: loop=1, retry=0 fwohci0: fwphy_rddata: loop=1, retry=0 atapci0: <SiS 96X UDMA133 controller> port 0x1000-0x100f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.5 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=51 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=10 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xe8001000-0xe8001fff irq 9 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe8002000-0xe8002fff irq 11 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xe8003000-0xe8003fff irq 10 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0xe000-0xe0ff mem 0xe8005000-0xe8005fff irq 9 at device 4.0 on pci0 sis0: Ethernet address: 00:50:eb:1d:26:b5 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached an0: <Cisco Aironet MPI350> port 0x2400-0x24ff mem 0xe8400000-0xe87fffff,0xe8008000-0xe800bfff irq 11 at device 5.0 on pci0 an0: got RSSI <-> dBM map an0: Ethernet address: 00:07:50:d5:78:d0 an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps an0: bpf attached cbb0: <PCI-CardBus Bridge> irq 10 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0x14101524 0x02100007 0x06070000 0x00022000 0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010a 0x40: 0xb7321019 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0c44d021 0x00000000 0x00000000 0x000c1002 0x90: 0x404482c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe010001 0x00c00100 0x00000000 0x00000009 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00001000 0x00800080 0x10080000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) npx0: <math processor> on motherboard npx0: INT 16 interface Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xd0000-0xd7fff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f 98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f 98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start system power profile changed to 'economy' acpi_acad0: Off Line acpi_cmbat0: battery initialization start ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: success setting UDMA33 on SiS 645DX chip ad0: <HITACHI_DK23DA-40/00J0A0A1> ATA-5 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=12 dmamode=34 udmamode=69 cblid=1 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1 ata1-master: success setting PIO4 on SiS 645DX chip acd0: <QSI CD-RW/DVD-ROM SBW-241/VX11> CD-RW drive at ata1 as master acd0: read 4125KB/s (32015KB/s) write 4136KB/s (4136KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet acd0: Writes: CD-R, CD-RW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:61593147 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:61593210 l:16546950 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 31535691264 end 31535723519 GEOM: Configure ad0s2, start 31535723520 length 8472038400 end 40007761919 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 1047224320 end 1315659775 GEOM: Configure ad0s2c, start 0 length 8472038400 end 8472038399 GEOM: Configure ad0s2d, start 1315659776 length 268435456 end 1584095231 GEOM: Configure ad0s2e, start 1584095232 length 268435456 end 1852530687 GEOM: Configure ad0s2f, start 1852530688 length 6619507712 end 8472038399 acpi_cmbat0: battery initialization done, tried 1 times (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init splash: image decoder found: blank_saver Linux ELF exec handler installed netsmb_dev: loaded acpi_acad0: acline initialization done, tried 7 timesReceived on Mon Jun 23 2003 - 05:38:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:12 UTC