Problems with clock

Hi everyone!

I have strange problems with my PC clock. Clock seems to be ~2 times faster.

What's up?

Andris

Here is dmesg output:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p6 #0: Fri Mar 28 11:45:46 EET 2003
    root_at_mezhs.buts.lv:/usr/obj/usr/src/sys/MEZHS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0407000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04070a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 333516074 Hz
CPU: AMD-K6(tm) 3D processor (333.52-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0xffffffff80000800<SYSCALL,3DNow!>
real memory  = 134152192 (127 MB)
avail memory = 125931520 (120 MB)
Initializing GEOMetry subsystem
K6-family MTRR support enabled (2 registers)
VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c4eeb (c0004eeb)
VESA: S3 Incorporated. 86C775/86C785
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ALi_ > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 6 entries at 0xc00f7c40
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Ali M1541 host to AGP bridge> mem 0xd0000000-0xd1ffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at device 8.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
0xebfeff00-0xebfeffff irq 10 at device 9.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 00:30:4f:16:8f:79
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdf80-0xdf9f irq 9 at device
10.0 on pci0
ed0: address 00:48:45:00:07:9e, type NE2000 (16 bit) 
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf at device
15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
accept, logging unlimited
DUMMYNET initialized (011031)
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 3098MB <ST33210A> [6296/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a