I have Acer TM 620 notebook with onboard fxp NIC that failed to work on FreeBSD. When I bring fxp up all userland is frozen and I got "fxp0: device timeout" message repeating. Seems that most devices are using IRQ 10 and I suspect ACPI. Disabling ACPI doesn't help so I tried also to correct ACPI DSDT but without success. I would appreciate any help with this problem. Thanks, Damjan Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Mon May 5 09:22:35 CEST 2003 root_at_:/usr/src/sys/i386/compile/DAMJAN-OLD Preloaded elf kernel "/boot/kernel/kernel" at 0xc0505000. Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc05050a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05050f0. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 999891727 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz (999.89-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 528285696 (503 MB) avail memory = 507650048 (484 MB) Pentium Pro MTRR support enabled ACPI: DSDT was overridden. ACPI-0375: *** Info: Table [DSDT] replaced by host OS npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <Acer TM530 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fb700 acpi_bus_number: root bus has no _BBN, assuming 0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_bus_number: root bus has no _BBN, assuming 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf108-0xf10b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_tz1: <thermal zone> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 0x90100000-0x9017ffff,0x98000000-0x9fffffff irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xa4a0-0xa4bf irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xa4e0-0xa4ff irq 10 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xa800-0xa81f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0x80104000-0x80107fff,0x80100000-0x801007ff irq 10 at device 3.0 on pci1 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 10:25:10:1f:00:02:f7:2f fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP2/SCSI over firewire> on firewire0 fwohci0: Initiate bus reset pci1: <network, ethernet> at device 8.0 (no driver attached) pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 9.0 on pci1 pcic0: Could not grab register memory device_probe_and_attach: pcic0 attach returned 12 pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 9.1 on pci1 pcic0: Could not grab register memory device_probe_and_attach: pcic0 attach returned 12 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xa890-0xa89f,0xa878-0xa87b,0xa860-0xa867,0xa848-0xa84b,0xa830-0xa837 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 8250 or not responding sio1 port 0x240-0x247,0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card 16-bit bus (classic)> on pcic0 pccard1: <PC Card 16-bit bus (classic)> on pcic0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA100 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4 pccard: card inserted, slot 1 Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 0 wi0 at port 0x240-0x27f irq 5 slot 0 on pccard0 wi0: 802.11 address: 00:02:2d:0b:01:b8 wi0: using Lucent Technologies, WaveLAN/IEEE wi0: Lucent Firmware: Station (6.16.1) wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps module_register: module pccard/wi already exists! Module pccard/wi failed to register: 17 module_register: module pci/wi already exists! Module pci/wi failed to register: 17 pcic2: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 9.0 on pci1 pcic2: Could not map register memory 0xfffff000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 9.1 on pci1 pcic2: Could not map register memory 0xfffff000 device_probe_and_attach: pcic2 attach returned 12 stray irq 7 fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x7000-0x703f mem 0x80101000-0x80101fff irq 10 at device 8.0 on pci1 device_probe_and_attach: fxp0 attach returned 12 pcic2: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 9.0 on pci1 pcic2: Could not map register memory 0xfffff000 device_probe_and_attach: pcic2 attach returned 12 pcic2: <O2micro 6933 PCI-Cardbus Bridge> irq 10 at device 9.1 on pci1 pcic2: Could not map register memory 0xfffff000 device_probe_and_attach: pcic2 attach returned 12Received on Mon May 05 2003 - 12:25:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:06 UTC