In attached file 'shell.text' there is information from 'malloc.conf, uname -a, dmesg'. Also I attached my configuration file. Last night I cvsup-ed CURRENT and 'ifconfig tun0 down' problem appeared again on established modem connection. Once 'ddb' were started on tunopen(), but still I can't handle how to save information into log file from 'ddb' on one machine. Dimitar Peikov Development Software ___________________________ BORG INSTRUMENTS Ltd. 17 Washington str. BG - 1040, Sofia Tel.: +359 (0) 2 989 5523 Fax: +359 (0) 2 989 5585 mailto:Dimitar.Peikov_at_borg.de http://www.borg.de "Sergey A. Osokin" <osa_at_freebsd.org.ru> 05/14/2003 11:39 Please respond to osa To: Dimitar.Peikov_at_borg.de cc: freebsd-current_at_freebsd.org Subject: Re: ifconfig tun0 down -> reboot on current On Wed, May 14, 2003 at 09:14:10AM +0300, Dimitar.Peikov_at_borg.de wrote: > > Last night I try to down 'tun0' interface when my modem was connected to > internet, machine hangs and after 5-6 seconds just reboot. I didn't try to > reproduce this, because the time was too late, but I think that I can. At > that time I had opened Mozilla 1.02, one wget and 2-3 xterm's under > WindowMaker. > I'm using current from sunday evening - GMT+2. uname -a? -- Rgdz, /"\ ASCII RIBBON CAMPAIGN Sergey Osokin aka oZZ, \ / AGAINST HTML MAIL http://ozz.pp.ru/ X AND NEWS / \ (See attached file: mitko.conf) (See attached file: shell.text) bash-2.05a$ ls -la /etc/malloc.conf lrwxr-xr-x 1 root wheel 9 Aug 31 2002 /etc/malloc.conf -> >>>hrjzxv bash-2.05a$ uname -a FreeBSD mitko 5.1-BETA FreeBSD 5.1-BETA #6: Wed May 14 22:06:05 GMT 2003 mitko_at_mitko:/usr/obj/usr/src/sys/mitko i386 bash-2.05a$ dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-BETA #6: Wed May 14 22:06:05 GMT 2003 mitko_at_mitko:/usr/obj/usr/src/sys/mitko Preloaded elf kernel "/boot/kernel/kernel" at 0xc05a7000. Preloaded elf module "/boot/kernel/s3.ko" at 0xc05a71a4. Timecounter "i8254" frequency 1193397 Hz Timecounter "TSC" frequency 375069918 Hz CPU: Pentium II/Pentium II Xeon/Celeron (375.07-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x660 Stepping = 0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201326592 (192 MB) avail memory = 189530112 (180 MB) netsmb_dev: loaded Pentium Pro MTRR support enabled VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc00c0c7a (c0000c7a) VESA: S3 Incorporated. Savage4 npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00fdf20 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 s3pci0: <S3 graphic card> port 0x4ae8,0x3c0-0x3df mem 0xe8000000-0xefffffff,0xf1000000-0xf107ffff irq 11 at device 0.0 on pci1 start (4ae8) < sc->iobase (c000) pcib1: device s3pci0 requested unsupported I/O range 0x4ae8-0x4ae8 (decoding 0xc000-0xcfff) s3pci_attach: enhanced port resource allocation failed! device_probe_and_attach: s3pci0 attach returned 6 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xf2000000-0xf2000fff irq 11 at device 9.0 on pci0 usb1: OHCI version 1.0, legacy support usb1: <OPTi 82C861 (FireLink) USB controller> on ohci0 usb1: USB revision 1.0 uhub1: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcm0: <ESS Solo-1E> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdc0f,0xd800-0xd80f,0xd400-0xd43f irq 5 at device 10.0 on pci0 pci0: <multimedia> at device 11.0 (no driver attached) orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0a03> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. Profiling kernel, textsize=3062896 [c0132370..c041dfe0] cputime 139, empty_loop 5, nullfunc_loop_profiled 405, mcount 531, mexitcount 360 Profiling overheads: mcount: 133+391, 367+157; mexitcount: 133+221, 322+31 nsec Profiling overheads: mcount: 50+147, 138+59; mexitcount: 50+83, 121+12 cycles ad0: 32253MB <MAXTOR 4K040H2> [65531/16/63] at ata0-master UDMA33 ad1: 4110MB <QUANTUM FIREBALL SE4.3A> [14848/9/63] at ata0-slave UDMA33 acd0: CD-RW <CD-W58E> at ata1-master PIO4 acd1: CDROM <CD-524EA> at ata1-slave PIO3 Mounting root from ufs:/dev/ad0s3a Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point . swapon: adding /dev/ad0s3b as swap device Starting file system checks: /dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 1293994 free (57514 frags, 154560 blocks, 1.6% fragmentation) Setting hostname: mitko. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 Additional routing options: . /etc/rc: INFO: run_rc_command: cannot run (routed). hw.bus.devctl_disable: 0 -> 1 Mounting NFS file systems: . Starting syslogd. syslogd: /var/log/debug.log: No such file or directory May 15 08:02:52 mitko syslogd: kernel boot file is /boot/kernel/kernel Starting rpcbind. Setting NIS domain: mitko. ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting local daemons: . Updating motd. Configuring syscons: blanktime . Initial i386 initialization: . Additional ABI support: linux . Starting cron. Local package initialization: xfstt . Additional TCP options: . Starting moused: . Starting inetd. Starting background file system checks in 60 seconds. Thu May 15 08:03:00 GMT 2003 May 15 08:07:17 mitko login: ROOT LOGIN (root) ON ttyv0
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:08 UTC