Hi, I'm running into the following when attempting to install the most recent BETA .iso (downloaded last night) on an IBM Netfinity 5500 M20 box with the following hardware: 4 x 550MHz P-III Xeon 2GB Ram AMD 79CXXX ethernet adapter on motherboard IBM ServeRAID 2 on motherboard - no disks attached at the moment bios version 4.70.17 Intel 82559 100B/T ether in PCI slot Adaptec 2940UW with bios v1.34.3 w/ 6 x 18G drives attached Machine's BIOS set to factory defaults. This machine boots & runs FreeBSD 4.8 just fine. It also boots from CDROM & installs & boots & runs FreeBSD 5.0 from CDROM. After the announcement by Scott Long on the scsi list that the ServeRAID drivers had been made available, I thougth I'd try to pound on them a little bit. I work for a shop that uses quite a bit of IBM Netfinity boxen and they like FreeBSD. Below is a screen dump (transcribed by hand - forgive the typos) of the boot off a 5.1BETA2 CDROM. If there is anything else that I can extract out of this, let me know. Thanks again for a great OS! Dexter McNeil dexter_at_backtech.com FreeBSD/i386 bootstrap loader, Revision 1.1 (root_at_wv1u.btc.adaptec.com, Tue May 20 14:07:42 GMT 2003) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x41eb3c data=0x7753c+0x7dc98 syms=[0x4+0x55a70+0x4+0x64c30] - Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... /boot/kernel/acpi.ko text=0x39b20 data=0x1638+0xf68 syms=[0x4+0x5990+0x4+0x75d9/] Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-BETA2 #0: Tue May 20 16:08:27 GMT 2003 root_at_wv1u.btc.adaptec.com:/usr/obj/user/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b53000. Preloaded mfs_root "/boot/mfsroot" at 0xc0b5321c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b53260. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 547585316 Hz CPU: Pentium III/Pentium III Xeon/Celeron (547.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147463168 (2047 MB) avail memory = 2078240768 (1981 MB) Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06cf3bc nxp0: <math processor> on motherboard nxp0: INT 16 interface acpi0: <IBM SERKQUAD> on motherboard pcibios: BIOS version 2.10 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 35979545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfd08-0xfd0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff onacpi0 pci0: <ACPI PCI bus> on pcib0 ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfebfe000-0xfebfffff irq11 at device 3.0 on pci0 ips0: reinitializing adapter, this could take several minutes. ips0: failed to get configuration data from device device_probe_and_attach: ips0 attach returned 6 pcn0: Ethernet address: 00:06:29:38:cf:c1 miibus0: <MII bus> on pcn0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <display, VGA> at device 15.0 (no driver attached) Memory modified after free 0xc7ef5800(252) panic: Most recently used by devbuf Debugger("panic") Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0 db>Received on Wed May 21 2003 - 20:10:17 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:08 UTC