Re: 5.1-beta2 failed upgrade install

>>   I want to upgrade from 5.1-BETA-20030522-JPSNAP to 5.1-BETA2
>> with CD-ROM (5.1-BETA2-i386-disc1.iso).
> 
> Can you retry the test and type 'trace' at the db> prompt, then post
> the results in an email?

  Hi, Scott-san.
  I upgraded from 5.1-BETA2 to 5.1-BETA2 for testing.  The following
message is displayed.

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x0
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc03046d3
stack pointer           = 0x10:0xe16afaf0
frame pointer           = 0x10:0xe16afb10
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 34 (syncer)
kernel: type 12 trap, code=0
Stopped at      _mtx_lock_flags+0x43:   cmpl    $0xc05541ac,0(%ebx)
db> trace
_mtx_lock_flags(0,0,c05041bd,8eb,c05c40c8) at _mtx_lock_flags+0x43
vfs_setdirty(d4642588,c05041bd,e16afb70,c03047f0,c84725b4) at vfs_setdirty+0x79
vfs_busy_pages(d4642588,1,c05041bd,35e,c05c21c0) at vfs_busy_pages+0x59
bwrite(d4642588,e16afc14,c043b580,d4642588,d4d98000) at bwrite+0x305
bawrite(d4642588,d4d98000,800,800,0) at bawrite+0x1c
ffs_sbupdate(c8453900,3,c05122d6,4b4,0) at ffs_sbupdate+0x110
ffs_sync(c82d5c00,3,c3ee7f00,c3f06ab0,c82d5c00) at ffs_sync+0x3c7
sync_fsync(e16afcd0,20002,c3f06ab0,6c6,0) at sync_fsync+0x16a
sched_sync(0,e16afd48,c04fc5b7,2f8,0) at sched_sync+0x17e
fork_exit(c0363c10,0,e16afd48) at fork_exit+0xc0
fork_trampoline() at fork_trampoline+0x1a
--- trap 0x1, eip = 0, esp = 0xe16afd7c, ebp = 0 ---
db>

------------- dmesg is shown below ----------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA2 #0: Tue May 20 16:08:27 GMT 2003
    root_at_wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b09000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0b09200.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2399326424 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2147483648 (2048 MB)
avail memory = 2078687232 (1982 MB)
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06cf3bc
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00f2fb0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 29.0 on pci2
pci4: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xd800-0xd83f mem 0xfe9e0000-0xfe9fffff irq 9 at device 1.0 on pci4
em0:  Speed:N/A  Duplex:N/A
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <PCI-PCI bridge> at device 31.0 on pci2
pci3: <PCI bus> on pcib3
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xe800-0xe81f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib4: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib4
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc400-0xc43f mem 0xfe7a0000-0xfe7bffff,0xfe7fe000-0xfe7fefff irq 5 at device 1.0 on pci1
fxp0: Ethernet address 00:e0:81:25:ef:f6
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <display, VGA> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 78167MB <IODATA DELTA2 RAID HDD> [158816/16/63] at ata0-master UDMA100
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
Mounting root from ufs:/dev/md0
/stand/sysinstall running as init on serial console