Hi Jun, Thank you for your suggestion. I am now using the boot floppy with /boot/loader -hv and it has given me more information, but it still is not working... Does anyone have any thoughts on this? Should I try taking this box out of the rack and try it with a monitor? Will that make any diffrence? FreeBSD/i386 boot Default: 0:fd(0,a)/boot/loader boot: Uncompressing ... done Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 633kB/4061120kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root_at_ushi.jp.freebsd.org, Wed Oct 29 04:14:01 GMT 2003) >include /boot/device.hints >set hint.fdc.0.at="isa" >set hint.fdc.0.port="0x3F0" >set hint.fdc.0.irq="6" >set hint.fdc.0.drq="2" >set hint.fd.0.at="fdc0" >set hint.fd.0.drive="0" >set hint.fd.1.at="fdc0" >set hint.fd.1.drive="1" >set hint.ata.0.at="isa" >set hint.ata.0.port="0x1F0" >set hint.ata.0.irq="14" >set hint.ata.1.at="isa" >set hint.ata.1.port="0x170" >set hint.ata.1.irq="15" >set hint.adv.0.at="isa" >set hint.adv.0.disabled="1" >set hint.bt.0.at="isa" >set hint.bt.0.disabled="1" >set hint.aha.0.at="isa" >set hint.aha.0.disabled="1" >set hint.aic.0.at="isa" >set hint.aic.0.disabled="1" >set hint.atkbdc.0.at="isa" >set hint.atkbdc.0.port="0x060" >set hint.atkbd.0.at="atkbdc" >set hint.atkbd.0.irq="1" >set hint.atkbd.0.flags="0x1" >set hint.psm.0.at="atkbdc" >set hint.psm.0.irq="12" >set hint.vga.0.at="isa" >set hint.sc.0.at="isa" >set hint.sc.0.flags="0x100" >set hint.vt.0.at="isa" >set hint.vt.0.disabled="1" >set hint.apm.0.disabled="1" >set hint.apm.0.flags="0x20" >set hint.pcic.0.at="isa" >set hint.pcic.0.port="0x3e0" >set hint.pcic.0.maddr="0xd0000" >set hint.pcic.1.at="isa" >set hint.pcic.1.irq="11" >set hint.pcic.1.port="0x3e2" >set hint.pcic.1.maddr="0xd4000" >set hint.pcic.1.disabled="1" >set hint.sio.0.at="isa" >set hint.sio.0.port="0x3F8" >set hint.sio.0.flags="0x10" >set hint.sio.0.irq="4" >set hint.sio.1.at="isa" >set hint.sio.1.port="0x2F8" >set hint.sio.1.irq="3" >set hint.sio.2.at="isa" >set hint.sio.2.disabled="1" >set hint.sio.2.port="0x3E8" >set hint.sio.2.irq="5" >set hint.sio.3.at="isa" >set hint.sio.3.disabled="1" >set hint.sio.3.port="0x2E8" >set hint.sio.3.irq="9" >set hint.ppc.0.at="isa" >set hint.ppc.0.irq="7" >set hint.ed.0.at="isa" >set hint.ed.0.disabled="1" >set hint.ed.0.port="0x280" >set hint.ed.0.irq="10" >set hint.ed.0.maddr="0xd8000" >set hint.cs.0.at="isa" >set hint.cs.0.disabled="1" >set hint.cs.0.port="0x300" >set hint.sn.0.at="isa" >set hint.sn.0.disabled="1" >set hint.sn.0.port="0x300" >set hint.sn.0.irq="10" >set hint.ie.0.at="isa" >set hint.ie.0.disabled="1" >set hint.ie.0.port="0x300" >set hint.ie.0.irq="10" >set hint.ie.0.maddr="0xd0000" >set hint.fe.0.at="isa" >set hint.fe.0.disabled="1" >set hint.fe.0.port="0x300" >set hint.le.0.at="isa" >set hint.le.0.disabled="1" >set hint.le.0.port="0x300" >set hint.le.0.irq="5" >set hint.le.0.maddr="0xd0000" >set hint.lnc.0.at="isa" >set hint.lnc.0.disabled="1" >set hint.lnc.0.port="0x280" >set hint.lnc.0.irq="10" >set hint.lnc.0.drq="0" >load /kernel /kernel text=0x23b500 data=0x2f024+0x4bedc / >echo \007\007 >echo Please insert MFS root floppy and press enter: Please insert MFS root floppy and press enter: >read >load -t mfs_root /mfsroot >set hint.acpi.0.disabled=1 >set driver_floppy=YES >set module_path="/modules;/dist" >echo \007\007 >autoboot 10 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/kernel]... 131072K of memory above 4GB ignored Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20031029-JPSNAP #0: Wed Oct 29 04:30:49 GMT 2003 root_at_ushi.jp.freebsd.org:/usr/obj/usr/src/sys/BOOTMFS Preloaded elf kernel "/kernel" at 0xc0af1000. Preloaded mfs_root "/mfsroot" at 0xc0af12c0. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 4160225280 (3967 MB) avail memory = 4043710464 (3856 MB) Pentium Pro MTRR support enabled md0: Preloaded image </mfsroot> 4423680 bytes at 0xc06b7400 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 29 entries at 0xc00fddf0 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:29 INTA BIOS irq 11 pci_cfgintr: 0:29 INTB BIOS irq 10 pci_cfgintr: 0:29 INTC BIOS irq 5 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci1 pci2: <PCI bus> on pcib2 pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib3: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci1 pci3: <PCI bus> on pcib3 pci_cfgintr: 3:2 INTA BIOS irq 11 pci_cfgintr: 3:2 INTB BIOS irq 11 pci3: <network, ethernet> at device 2.0 (no driver attached) pci3: <network, ethernet> at device 2.1 (no driver attached) pcib4: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0 pci4: <PCI bus> on pcib4 pci4: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib5: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci4 pci5: <PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib6: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci4 pci6: <PCI bus> on pcib6 pci_cfgintr: 6:1 INTA BIOS irq 12 asr0: <Adaptec Caching SCSI RAID> mem 0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8400000-0xf84fffff irq 12 at device 1.0 on pci6 asr0: major=154 asr0: ADAPTEC 2010S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 10 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f irq 5 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci7: <PCI bus> on pcib7 pci_cfgintr: 7:1 INTA BIOS irq 11 pci7: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Thanks, Stephane. >From: Jun Kuriyama <kuriyama_at_imgsrc.co.jp> >To: "Stephane Raimbault" <segr_at_hotmail.com> >CC: <current_at_freebsd.org> >Subject: Re: 5.1-R and 5.1-C floppies will not boot on SuperMicro 6023P-8R >Date: Sat, 01 Nov 2003 15:41:36 +0900 > >At Fri, 31 Oct 2003 16:56:43 +0000 (UTC), >Stephane Raimbault wrote: > > Does anyone have any thoughts regarding this? I would like to get 5.1 >on > > this server. > >How about trying with -v at boot? > > >-- >Jun Kuriyama <kuriyama_at_imgsrc.co.jp> // IMG SRC, Inc. > <kuriyama_at_FreeBSD.org> // FreeBSD Project _________________________________________________________________ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-caReceived on Mon Nov 03 2003 - 08:46:44 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:27 UTC