Hi, I have an ASUS system with 2 CPUs that I need to run at HZ=10000. This worked until yesterday, but with the new interrupt code it doesn't boot anymore. It works for the standard HZ, but if I set HZ=1000 I get a double fault. I suspect a race condition in the interrupt handling. My config file has options SMP device apic options HZ=1000 I have commented out acpi, but that doesn't change anything. A verbose boot looks like: OK boot -v SMAP type=01 base=0000000000000000 len=000000000009f800 SMAP type=02 base=000000000009f800 len=0000000000000800 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000001feec000 SMAP type=03 base=000000001ffec000 len=0000000000003000 SMAP type=02 base=000000001ffef000 len=0000000000010000 SMAP type=04 base=000000001ffff000 len=0000000000001000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #29: Tue Nov 4 13:50:23 CET 2003 hbb_at_beagle.fokus.fraunhofer.de:/opt/obj/usr/src/sys/MARIPOSA Preloaded elf kernel "/boot/kernel/kernel" at 0xc069b000. Preloaded elf module "/boot/kernel/random.ko" at 0xc069b278. Calibrating clock(s) ... i8254 clock: 1193132 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1380009492 Hz CPU: AMD Athlon(TM) MP 1800+ (1380.01-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536788992 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000001f6c5fff, 518639616 bytes (126621 pages) avail memory = 516005888 (492 MB) MPTable: <ASUS PROD00000000> APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f2560 bios32: Entry = 0xf1d20 (c00f1d20) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1f20 pnpbios: Found PnP BIOS data at 0xc00fc5e0 pnpbios: Entry = f0000:c610 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: intpin 0 -> ExtINT ioapic0: intpin 1 -> irq 1 ioapic0: intpin 2 -> irq 2 ioapic0: intpin 3 -> irq 3 ioapic0: intpin 4 -> irq 4 ioapic0: intpin 5 -> irq 5 ioapic0: intpin 6 -> irq 6 ioapic0: intpin 7 -> irq 7 ioapic0: intpin 8 -> irq 8 ioapic0: intpin 9 -> irq 9 ioapic0: intpin 10 -> irq 10 ioapic0: intpin 11 -> irq 11 ioapic0: intpin 12 -> irq 12 ioapic0: intpin 13 -> irq 13 ioapic0: intpin 14 -> irq 14 ioapic0: intpin 15 -> irq 15 ioapic0: intpin 16 -> irq 16 ioapic0: intpin 17 -> irq 17 ioapic0: intpin 18 -> irq 18 ioapic0: intpin 19 -> irq 19 ioapic0: intpin 20 -> irq 20 ioapic0: intpin 21 -> irq 21 ioapic0: intpin 22 -> irq 22 ioapic0: intpin 23 -> irq 23 ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: active-lo ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: active-lo ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: active-lo ioapic0: intpin 18 trigger: level ioapic0: intpin 18 polarity: active-lo ioapic0: intpin 17 trigger: level ioapic0: intpin 17 polarity: active-lo ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: active-lo ioapic0: intpin 1 trigger: edge ioapic0: intpin 1 polarity: active-hi ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: active-hi ioapic0: intpin 4 trigger: edge ioapic0: intpin 4 polarity: active-hi ioapic0: intpin 5 trigger: edge ioapic0: intpin 5 polarity: active-hi ioapic0: intpin 6 trigger: edge ioapic0: intpin 6 polarity: active-hi ioapic0: intpin 7 trigger: edge ioapic0: intpin 7 polarity: active-hi ioapic0: intpin 8 trigger: edge ioapic0: intpin 8 polarity: active-hi ioapic0: intpin 9 trigger: edge ioapic0: intpin 9 polarity: active-hi ioapic0: intpin 13 trigger: edge ioapic0: intpin 13 polarity: active-hi ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: active-hi ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: active-hi lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: active-hi lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: active-hi ioapic0 <Version 17> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff mem: <memory & I/O> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source> npx0: [FAST] stray irq13 npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80012848 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700c1022) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00f24a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 B 0x01 3 4 5 7 9 10 11 12 embedded 0 7 C 0x02 3 4 5 7 9 10 11 12 embedded 0 7 D 0x03 3 4 5 7 9 10 11 12 slot 1 0 8 B 0x01 3 4 5 7 9 10 11 12 slot 1 0 8 C 0x02 3 4 5 7 9 10 11 12 slot 1 0 8 D 0x03 3 4 5 7 9 10 11 12 slot 2 0 9 A 0x01 3 4 5 7 9 10 11 12 slot 2 0 9 B 0x02 3 4 5 7 9 10 11 12 slot 2 0 9 C 0x03 3 4 5 7 9 10 11 12 slot 3 2 6 A 0x01 3 4 5 7 9 10 11 12 slot 3 2 6 B 0x02 3 4 5 7 9 10 11 12 slot 3 2 6 C 0x03 3 4 5 7 9 10 11 12 slot 4 2 5 A 0x02 3 4 5 7 9 10 11 12 slot 4 2 5 B 0x03 3 4 5 7 9 10 11 12 slot 4 2 5 D 0x01 3 4 5 7 9 10 11 12 slot 5 2 8 A 0x03 3 4 5 7 9 10 11 12 slot 5 2 8 C 0x01 3 4 5 7 9 10 11 12 slot 5 2 8 D 0x02 3 4 5 7 9 10 11 12 embedded 1 5 B 0x01 3 4 5 7 9 10 11 12 embedded 1 5 C 0x02 3 4 5 7 9 10 11 12 embedded 1 5 D 0x03 3 4 5 7 9 10 11 12 embedded 2 4 A 0x01 3 4 5 7 9 10 11 12 embedded 2 4 B 0x02 3 4 5 7 9 10 11 12 embedded 2 4 C 0x03 3 4 5 7 9 10 11 12 embedded 2 0 B 0x01 3 4 5 7 9 10 11 12 embedded 2 0 C 0x02 3 4 5 7 9 10 11 12 embedded 2 0 D 0x03 3 4 5 7 9 10 11 12 pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base fc000000, size 25, enabled map[14]: type 3, range 32, base fb800000, size 12, enabled map[18]: type 4, range 32, base 0000e800, size 2, port disabled found-> vendor=0x1022, dev=0x700c, revid=0x11 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x700d, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7440, revid=0x04 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d800, size 4, enabled found-> vendor=0x1022, dev=0x7441, revid=0x04 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7443, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f8000000, size 20, enabled pcib0: slot 8 INTA routed to irq 16 found-> vendor=0x1127, dev=0x0400, revid=0x00 bus=0, slot=8, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 found-> vendor=0x1022, dev=0x7448, revid=0x04 bus=0, slot=16, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0017, statreg=0x2220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xf8800000-0xf9bfffff pcib1: prefetched decode 0xf9f00000-0xfb7fffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base fa000000, size 24, enabled map[14]: type 1, range 32, base f9000000, size 14, enabled map[18]: type 1, range 32, base f8800000, size 23, enabled pcib1: slot 5 INTA routed to irq 16 found-> vendor=0x102b, dev=0x0521, revid=0x01 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=16 powerspec 1 supports D0 D3 current D0 pci1: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 UDMA100 controller> port 0xd800-0xd80f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x7f msb=0x7f ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <network, ATM> at device 8.0 (no driver attached) pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xf6000000-0xf7ffffff pcib2: prefetched decode 0xf9c00000-0xf9dfffff pci2: <PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000c800, size 7, enabled map[14]: type 1, range 32, base f7000000, size 7, enabled pcib2: slot 5 INTA routed to irq 18 found-> vendor=0x10b7, dev=0x9200, revid=0x74 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f6800000, size 20, enabled pcib2: slot 6 INTA routed to irq 17 found-> vendor=0x1127, dev=0x0400, revid=0x01 bus=2, slot=6, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=17 map[10]: type 1, range 32, base f6000000, size 20, enabled pcib2: slot 8 INTA routed to irq 19 found-> vendor=0x1127, dev=0x0400, revid=0x01 bus=2, slot=8, func=0 class=02-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0220, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x01 (250 ns) intpin=a, irq=19 pci2: <network, ethernet> at device 5.0 (no driver attached) pci2: <network, ATM> at device 6.0 (no driver attached) pci2: <network, ATM> at device 8.0 (no driver attached) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnpbios: 13 devices, largest 114 bytes PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 2 device ID PNP0501 (0105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 pnpbios: handle 4 device ID PNP0700 (0007d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 5 device ID PNP0f13 (130fd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000 PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xc8800-0xcbfff, size=0x3800 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 6 device ID PNP0c01 (010cd041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 8 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x75, size=0x6, align=0 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 10 device ID PNP0303 (0303d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0 pnpbios: handle 11 device ID PNP0c04 (040cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 pnpbios: handle 12 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 13 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 14 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0 PNP0c02: adding io range 0xe4e0-0xe4ff, size=0x20, align=0 pnpbios: handle 15 device ID PNP0c02 (020cd041) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0xe041 0xe051 0xe041 0xe041 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xe051 0xe051 0xe051 0xe051 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 psmcpnp0: <PS/2 mouse port> at irq 12 on isa0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 speaker0: <PC speaker> at port 0x61 on isa0 Device configuration finished. Timecounter "TSC" frequency 1380009492 Hz quality -100 Timecounters cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc0821bf4 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc08219a8 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc0821510 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc08212c4 frame pointer cpuicpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc0820e2c frame pointercpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc0820be0 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc0820994 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc0820748 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc08204fc frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc08202b0 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc0820064 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc081fe18 frame pointer cpuicpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc081f734 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc081f4e8 frame pointer cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x10:0xc081f29c frame pointer cpuicpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack cpuid = 0; apic id = 00 instruction pointer = 0x8:0xc048995d stack pointer = 0x1 0xc048995d is in critical_exit. It is the jmp after the popf from cpu_critical_exit. harti -- harti brandt, http://www.fokus.fraunhofer.de/research/cc/cats/employees/hartmut.brandt/private brandt_at_fokus.fraunhofer.de, harti_at_freebsd.orgReceived on Tue Nov 04 2003 - 04:16:41 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:27 UTC