RE: xl0 watchdog timeout

From: Shin-ichi Yoshimoto <yosimoto_at_waishi.jp>
Date: Wed, 5 Nov 2003 01:04:45 +0900
Subject: RE: xl0 watchdog timeout,
On Tue, 04 Nov 2003 10:39:44 -0500 (EST), John Baldwin wrote:
> Can you please provide a full dmesg?

yes. 

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #7: Tue Nov  4 19:11:26 JST 2003
    yosimoto_at_daemon.bsddaemon.jp:/usr/obj/usr/src/sys/DAEMON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0793000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc07931f4.
Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc07932a0.
Preloaded elf module "/boot/kernel/mga.ko" at 0xc079334c.
ACPI APIC Table: <VIA694 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family      1266MHz (1267.16-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073676288 (1023 MB)
avail memory = 1037688832 (989 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdc80
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pcib0: could not get PCI interrupt routing table for \\_SB_.PCI0 - AE_BAD_DATA
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <Matrox G400/G450 (AGP)> mem 0xe7000000-0xe77fffff,0xe6000000-0xe6003fff,0xe4000000-0xe5ffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
atapci0: <Promise PDC20267 UDMA100 controller> port 0xd000-0xd03f,0xcc00-0xcc03,0x1800-0x1807,0xc400-0xc403,0x1000-0x1007 mem 0xea000000-0xea01ffff irq 19 at device 8.0 on pci0
atapci0: [MPSAFE]
ata2: at 0x1000 on atapci0
ata2: [MPSAFE]
ata3: at 0x1800 on atapci0
ata3: [MPSAFE]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233C UDMA100 controller> port 0xd400-0xd40f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 11 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xe400-0xe47f mem 0xea020000-0xea02007f irq 10 at device 18.0 on pci0
xl0: Ethernet address: 00:04:75:3c:6b:ad
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xd4000-0xdc7ff,0xcc000-0xd3fff,0xc0000-0xc8fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 5000 packets/entry by default
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-120> at ata1-master UDMA66
GEOM: create disk ad4 dp=0xc66ceb70
ad4: 117246MB <Maxtor 6Y120P0> [238216/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=0xc66ce770
ad6: 117246MB <Maxtor 6Y120P0> [238216/16/63] at ata3-master UDMA100
GEOM: create disk ar0 dp=0xc66c61e0
ar0: 117246MB <ATA RAID1 array> [14946/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad6 at ata3-master
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ar0s1a
Accounting enabled
xl0: watchdog timeout


-- 
Shin-ichi YOSHIMOTO <yosimoto_at_waishi.jp>
http://diary.waishi.jp/~yosimoto/diary/
Received on Tue Nov 04 2003 - 07:04:49 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:27 UTC