Ah okay... that makes more sense and the results definately show more data that I'm sure will help pinpoint the problem. Here is the paste from the bootup. FreeBSD/i386 boot Default: 0:fd(0,a)/boot/loader boot: Uncompressing ... done Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 633kB/4061120kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root_at_ushi.jp.freebsd.org, Tue Nov 4 09:12:55 GMT 2003) >include /boot/device.hints >set hint.fdc.0.at="isa" >set hint.fdc.0.port="0x3F0" >set hint.fdc.0.irq="6" >set hint.fdc.0.drq="2" >set hint.fd.0.at="fdc0" >set hint.fd.0.drive="0" >set hint.fd.1.at="fdc0" >set hint.fd.1.drive="1" >set hint.ata.0.at="isa" >set hint.ata.0.port="0x1F0" >set hint.ata.0.irq="14" >set hint.ata.1.at="isa" >set hint.ata.1.port="0x170" >set hint.ata.1.irq="15" >set hint.adv.0.at="isa" >set hint.adv.0.disabled="1" >set hint.bt.0.at="isa" >set hint.bt.0.disabled="1" >set hint.aha.0.at="isa" >set hint.aha.0.disabled="1" >set hint.aic.0.at="isa" >set hint.aic.0.disabled="1" >set hint.atkbdc.0.at="isa" >set hint.atkbdc.0.port="0x060" >set hint.atkbd.0.at="atkbdc" >set hint.atkbd.0.irq="1" >set hint.atkbd.0.flags="0x1" >set hint.psm.0.at="atkbdc" >set hint.psm.0.irq="12" >set hint.vga.0.at="isa" >set hint.sc.0.at="isa" >set hint.sc.0.flags="0x100" >set hint.vt.0.at="isa" >set hint.vt.0.disabled="1" >set hint.apm.0.disabled="1" >set hint.apm.0.flags="0x20" >set hint.pcic.0.at="isa" >set hint.pcic.0.port="0x3e0" >set hint.pcic.0.maddr="0xd0000" >set hint.pcic.1.at="isa" >set hint.pcic.1.irq="11" >set hint.pcic.1.port="0x3e2" >set hint.pcic.1.maddr="0xd4000" >set hint.pcic.1.disabled="1" >set hint.sio.0.at="isa" >set hint.sio.0.port="0x3F8" >set hint.sio.0.flags="0x10" >set hint.sio.0.irq="4" >set hint.sio.1.at="isa" >set hint.sio.1.port="0x2F8" >set hint.sio.1.irq="3" >set hint.sio.2.at="isa" >set hint.sio.2.disabled="1" >set hint.sio.2.port="0x3E8" >set hint.sio.2.irq="5" >set hint.sio.3.at="isa" >set hint.sio.3.disabled="1" >set hint.sio.3.port="0x2E8" >set hint.sio.3.irq="9" >set hint.ppc.0.at="isa" >set hint.ppc.0.irq="7" >set hint.ed.0.at="isa" >set hint.ed.0.disabled="1" >set hint.ed.0.port="0x280" >set hint.ed.0.irq="10" >set hint.ed.0.maddr="0xd8000" >set hint.cs.0.at="isa" >set hint.cs.0.disabled="1" >set hint.cs.0.port="0x300" >set hint.sn.0.at="isa" >set hint.sn.0.disabled="1" >set hint.sn.0.port="0x300" >set hint.sn.0.irq="10" >set hint.ie.0.at="isa" >set hint.ie.0.disabled="1" >set hint.ie.0.port="0x300" >set hint.ie.0.irq="10" >set hint.ie.0.maddr="0xd0000" >set hint.fe.0.at="isa" >set hint.fe.0.disabled="1" >set hint.fe.0.port="0x300" >set hint.le.0.at="isa" >set hint.le.0.disabled="1" >set hint.le.0.port="0x300" >set hint.le.0.irq="5" >set hint.le.0.maddr="0xd0000" >set hint.lnc.0.at="isa" >set hint.lnc.0.disabled="1" >set hint.lnc.0.port="0x280" >set hint.lnc.0.irq="10" >set hint.lnc.0.drq="0" >load /kernel /kernel text=0x23bf5c data=0x2efa4+0x4bebc - >echo \007\007 >echo Please insert MFS root floppy and press enter: Please insert MFS root floppy and press enter: >read >load -t mfs_root /mfsroot >set hint.acpi.0.disabled=1 >set driver_floppy=YES >set module_path="/modules;/dist" >echo \007\007 >autoboot 10 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/kernel] in 7 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot -v SMAP type=01 base=0000000000000000 len=000000000009e400 SMAP type=02 base=000000000009e400 len=0000000000001c00 SMAP type=02 base=00000000000dc000 len=0000000000024000 SMAP type=01 base=0000000000100000 len=00000000f7df0000 SMAP type=03 base=00000000f7ef0000 len=000000000000c000 SMAP type=04 base=00000000f7efc000 len=0000000000004000 SMAP type=01 base=00000000f7f00000 len=0000000000080000 SMAP type=02 base=00000000f7f80000 len=0000000000080000 SMAP type=02 base=00000000fec00000 len=0000000000010000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ff800000 len=0000000000400000 SMAP type=02 base=00000000fff00000 len=0000000000100000 SMAP type=01 base=0000000100000000 len=0000000008000000 131072K of memory above 4GB ignored Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20031104-JPSNAP #0: Tue Nov 4 09:31:14 GMT 2003 root_at_ushi.jp.freebsd.org:/usr/obj/usr/src/sys/BOOTMFS Preloaded elf kernel "/kernel" at 0xc0af1000. Preloaded mfs_root "/mfsroot" at 0xc0af12cc. Calibrating clock(s) ... i8254 clock: 1193298 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2399327592 Hz CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 4160225280 (3967 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x00000000f3913fff, 4073644032 bytes (994542 pages) 0x00000000f7f00000 - 0x00000000f7f77fff, 491520 bytes (120 pages) avail memory = 4043706368 (3856 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6840 bios32: Entry = 0xfd650 (c00fd650) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd650+0x225 pnpbios: Found PnP BIOS data at 0xc00f68a0 pnpbios: Entry = f0000:9394 Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled md0: Preloaded image </mfsroot> 4423680 bytes at 0xc06b7dc0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=254c8086) pcibios: BIOS version 2.10 Using $PIR table, 29 entries at 0xc00fddf0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 6 2 1 A 0x68 3 4 5 7 10 11 12 14 15 slot 6 2 1 B 0x68 3 4 5 7 10 11 12 14 15 slot 6 2 1 C 0x68 3 4 5 7 10 11 12 14 15 slot 6 2 1 D 0x68 3 4 5 7 10 11 12 14 15 slot 7 2 2 A 0x68 3 4 5 7 10 11 12 14 15 slot 7 2 2 B 0x68 3 4 5 7 10 11 12 14 15 slot 7 2 2 C 0x68 3 4 5 7 10 11 12 14 15 slot 7 2 2 D 0x68 3 4 5 7 10 11 12 14 15 slot 5 3 1 A 0x68 3 4 5 7 10 11 12 14 15 slot 5 3 1 B 0x68 3 4 5 7 10 11 12 14 15 slot 5 3 1 C 0x68 3 4 5 7 10 11 12 14 15 slot 5 3 1 D 0x68 3 4 5 7 10 11 12 14 15 slot 11 3 2 A 0x68 3 4 5 7 10 11 12 14 15 slot 11 3 2 B 0x68 3 4 5 7 10 11 12 14 15 slot 11 3 2 C 0x68 3 4 5 7 10 11 12 14 15 slot 11 3 2 D 0x68 3 4 5 7 10 11 12 14 15 slot 3 5 1 A 0x69 3 4 5 7 10 11 12 14 15 slot 3 5 1 B 0x69 3 4 5 7 10 11 12 14 15 slot 3 5 1 C 0x69 3 4 5 7 10 11 12 14 15 slot 3 5 1 D 0x69 3 4 5 7 10 11 12 14 15 slot 2 5 2 A 0x69 3 4 5 7 10 11 12 14 15 slot 2 5 2 B 0x69 3 4 5 7 10 11 12 14 15 slot 2 5 2 C 0x69 3 4 5 7 10 11 12 14 15 slot 2 5 2 D 0x69 3 4 5 7 10 11 12 14 15 slot 1 5 3 A 0x69 3 4 5 7 10 11 12 14 15 slot 1 5 3 B 0x69 3 4 5 7 10 11 12 14 15 slot 1 5 3 C 0x69 3 4 5 7 10 11 12 14 15 slot 1 5 3 D 0x69 3 4 5 7 10 11 12 14 15 slot 4 6 1 A 0x69 3 4 5 7 10 11 12 14 15 slot 4 6 1 B 0x69 3 4 5 7 10 11 12 14 15 slot 4 6 1 C 0x69 3 4 5 7 10 11 12 14 15 slot 4 6 1 D 0x69 3 4 5 7 10 11 12 14 15 slot 9 6 2 A 0x69 3 4 5 7 10 11 12 14 15 slot 9 6 2 B 0x69 3 4 5 7 10 11 12 14 15 slot 9 6 2 C 0x69 3 4 5 7 10 11 12 14 15 slot 9 6 2 D 0x69 3 4 5 7 10 11 12 14 15 slot 8 17 1 A 0x63 3 4 5 7 10 11 12 14 15 slot 8 17 1 B 0x63 3 4 5 7 10 11 12 14 15 slot 8 17 1 C 0x63 3 4 5 7 10 11 12 14 15 slot 8 17 1 D 0x63 3 4 5 7 10 11 12 14 15 slot 7 18 1 A 0x63 3 4 5 7 10 11 12 14 15 slot 7 18 1 B 0x63 3 4 5 7 10 11 12 14 15 slot 7 18 1 C 0x63 3 4 5 7 10 11 12 14 15 slot 7 18 1 D 0x63 3 4 5 7 10 11 12 14 15 slot 10 7 1 A 0x60 3 4 5 7 10 11 12 14 15 slot 10 7 1 B 0x60 3 4 5 7 10 11 12 14 15 slot 10 7 1 C 0x60 3 4 5 7 10 11 12 14 15 slot 10 7 1 D 0x60 3 4 5 7 10 11 12 14 15 slot 11 7 2 A 0x61 3 4 5 7 10 11 12 14 15 slot 11 7 2 B 0x61 3 4 5 7 10 11 12 14 15 slot 11 7 2 C 0x61 3 4 5 7 10 11 12 14 15 slot 11 7 2 D 0x61 3 4 5 7 10 11 12 14 15 slot 12 7 3 A 0x62 3 4 5 7 10 11 12 14 15 slot 12 7 3 B 0x62 3 4 5 7 10 11 12 14 15 slot 12 7 3 C 0x62 3 4 5 7 10 11 12 14 15 slot 12 7 3 D 0x62 3 4 5 7 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 7 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 7 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 7 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 7 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 7 10 11 12 14 15 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x254c, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2541, revid=0x01 bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2543, revid=0x01 bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2545, revid=0x01 bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00002000, size 5, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:29 INTA BIOS irq 11 found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00002020, size 5, enabled pci_cfgintr_valid: BIOS irq 10 is valid pci_cfgintr: 0:29 INTB BIOS irq 10 found-> vendor=0x8086, dev=0x2484, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00002040, size 5, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 0:29 INTC BIOS irq 5 found-> vendor=0x8086, dev=0x2487, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 found-> vendor=0x8086, dev=0x244e, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2480, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00002060, size 4, enabled found-> vendor=0x8086, dev=0x248b, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001100, size 5, enabled found-> vendor=0x8086, dev=0x2483, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xf8100000-0xf82fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f8100000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x04 bus=1, slot=28, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1460, revid=0x04 bus=1, slot=29, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f8101000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x04 bus=1, slot=30, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1460, revid=0x04 bus=1, slot=31, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns) pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci1 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff pci2: <PCI bus> on pcib2 pci2: physical bus=2 pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib3: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci1 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x3000-0x3fff pcib3: memory decode 0xf8200000-0xf82fffff pcib3: prefetched decode 0xfff00000-0xfffff pci3: <PCI bus> on pcib3 pci3: physical bus=3 map[10]: type 1, range 64, base f8200000, size 17, enabled map[20]: type 4, range 32, base 00003000, size 6, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 3:2 INTA BIOS irq 11 found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=3, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base f8220000, size 17, enabled map[20]: type 4, range 32, base 00003040, size 6, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 3:2 INTB BIOS irq 11 found-> vendor=0x8086, dev=0x1010, revid=0x01 bus=3, slot=2, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci3: <network, ethernet> at device 2.0 (no driver attached) pci3: <network, ethernet> at device 2.1 (no driver attached) pcib4: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 6 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xf8300000-0xf84fffff pcib4: prefetched decode 0xfb000000-0xfdffffff pci4: <PCI bus> on pcib4 pci4: physical bus=4 map[10]: type 1, range 32, base f8300000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x04 bus=4, slot=28, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1460, revid=0x04 bus=4, slot=29, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f8301000, size 12, enabled found-> vendor=0x8086, dev=0x1461, revid=0x04 bus=4, slot=30, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0030, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1460, revid=0x04 bus=4, slot=31, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x24 (9000 ns), maxlat=0x00 (0 ns) pci4: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib5: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci4 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xfff00000-0xfffff pcib5: prefetched decode 0xfff00000-0xfffff pci5: <PCI bus> on pcib5 pci5: physical bus=5 pci4: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib6: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci4 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0xf8400000-0xf84fffff pcib6: prefetched decode 0xfb000000-0xfdffffff pci6: <PCI bus> on pcib6 pci6: physical bus=6 map[10]: type 1, range 32, base f8400000, size 20, enabled map[14]: type 3, range 32, base fb000000, size 24, enabled map[18]: type 3, range 32, base fc000000, size 25, enabled pci_cfgintr_valid: BIOS irq 12 is valid pci_cfgintr: 6:1 INTA BIOS irq 12 found-> vendor=0x1044, dev=0xa511, revid=0x01 bus=6, slot=1, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x2230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x01 (250 ns) intpin=a, irq=12 powerspec 2 supports D0 D3 current D0 asr0: <Adaptec Caching SCSI RAID> mem 0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8400000-0xf84fffff irq 12 at device 1.0 on pci6 asr0: major=154 pcib6: device asr0 requested decoded memory range 0xf8400000-0xf84fffff pcib4: device asr0 requested decoded memory range 0xf8400000-0xf84fffff pcib6: device asr0 requested decoded memory range 0xfb000000-0xfb400000 pcib4: device asr0 requested decoded memory range 0xfb000000-0xfb400000 asr0: ADAPTEC 2010S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 10 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f irq 5 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0x4000-0x4fff pcib7: memory decode 0xf8500000-0xf9ffffff pcib7: prefetched decode 0xfff00000-0xfffff pci7: <PCI bus> on pcib7 pci7: physical bus=7 map[10]: type 1, range 32, base f9000000, size 24, enabled map[14]: type 4, range 32, base 00004000, size 8, enabled map[18]: type 1, range 32, base f8500000, size 12, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 7:1 INTA BIOS irq 11 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=7, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci7: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata0: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=7f ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: reset tp2 mask=01 stat0=00 stat1=ff devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pnpbios: 20 devices, largest 164 bytes PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 PNP0c02: adding fixed memory32 range 0xfebffc00-0xfebfffff, size=0x400 pnpbios: handle 0 device ID PNP0c02 (020cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000 PNP0c01: adding fixed memory32 range 0x100000-0xffffffff, size=0xfff00000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 pnpbios: handle 3 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0c02: adding memory32 range 0xe0000-0xe3fff, size=0x4000, align=0x4000 pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1 PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1 PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1 pnpbios: handle 11 device ID PNP0c02 (020cd041) INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000 INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000 INT0800: adding fixed memory32 range 0xffa80000-0xffafffff, size=0x80000 INT0800: adding fixed memory32 range 0xffa00000-0xffa7ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff980000-0xff9fffff, size=0x80000 INT0800: adding fixed memory32 range 0xff900000-0xff97ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff880000-0xff8fffff, size=0x80000 INT0800: adding fixed memory32 range 0xff800000-0xff87ffff, size=0x80000 INT0800: adding fixed memory32 range 0xff000000-0xff07ffff, size=0x80000 pnpbios: handle 12 device ID INT0800 (0008d425) PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000 pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 pnpbios: handle 14 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xcf000-0xcffff, size=0x1000 pnpbios: handle 15 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 pnpbios: handle 17 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x8 pnpbios: handle 18 device ID PNP0501 (0105d041) PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x1 PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x1 PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x2 pnpbios: handle 21 device ID PNP0401 (0104d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 23 device ID PNP0700 (0007d041) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100. Failing probe. >From: Jun Kuriyama <kuriyama_at_imgsrc.co.jp> >To: "Stephane Raimbault" <segr_at_hotmail.com> >CC: current_at_freebsd.org >Subject: Re: 5.1-R and 5.1-C floppies will not boot on SuperMicro 6023P-8R >Date: Tue, 04 Nov 2003 07:53:18 +0900 > >At Mon, 3 Nov 2003 17:47:59 +0000 (UTC), >Stephane Raimbault wrote: > > >autoboot 10 > > Hit [Enter] to boot immediately, or any other key for command prompt. > > Booting [/kernel]... > >I meant to use "-v" at above. Hit any key at this 10 seconds waiting, >and type "boot -v" and enter at prompt. > > >-- >Jun Kuriyama <kuriyama_at_imgsrc.co.jp> // IMG SRC, Inc. > <kuriyama_at_FreeBSD.org> // FreeBSD Project _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/photos&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-caReceived on Tue Nov 04 2003 - 08:30:09 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:27 UTC