Re: new interrupts not working for me

From: Peter Schultz <pmes_at_btinet.net>
Date: Wed, 05 Nov 2003 19:50:47 -0600
John Baldwin wrote:
> On 05-Nov-2003 Peter Schultz wrote:
> 
>>I have a Tyan S1832DL w/dual pii 350s and it's not able to boot.  Seems 
>>to be having trouble with my adaptec scsi controller, I get a whole 
>>bunch of output like this hand transcribed bit, it comes after "waiting 
>>15 seconds for scsi devices to settle":
>>
>>ahc0 timeout SCB already complete interrupts may not be functioning
>>Infinite interrupt loop INTSTAT=0(probe3:ahc0:0:3:0): SCB 0x6 - timed out
>>
>>Anyone else seeing this?  There are probably 100+ related lines of 
>>output, I'll have to configure serial debugging if you need to see it.
> 
> 
> The dmesg output excluding all the ahc0 errors would help figure out
> why your interrupts aren't working.  However, I just committed a patch
> that might fix your problem.
> 
Now the kernel just dies and the machine reboots right in the beginning 
when it's setting up the ACPI/APIC stuff.  Of course, with ACPI off, 
there's no apparent problem with the kernel.

Pete...
Received on Wed Nov 05 2003 - 16:51:29 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:27 UTC