Hi all, Last night I cvsup-ed to -CURRENT and built world and kernel. Today this machine rebooted alot by itself, with absolutely no load on it whatsoever. I dont know how to determine what is causing the reboots, so if anyone can give me a hint, it would be greatly appreciated. This machine acts as a router/firewall. I know that this is not a hardware problem, seeing that for the last few months this machine was running pretty much stable under heavy load (building test kernels, compiling source code, etc) with 5.1-RELEASE. /var/log/messages does not really say anything. :( Attached is my dmesg output and my kernel config. If you need any other info please drop me a mail. Thank you! dmesg: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Thu Nov 6 01:13:55 SAST 2003 jacovt_at_firewall.symphiano:/usr/obj/usr/src/sys/FIREWALL Preloaded elf kernel "/boot/kernel/kernel" at 0xc06cf000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR> real memory = 134217728 (128 MB) avail memory = 124952576 (119 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fded0 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:8 INTA BIOS irq 11 pci_cfgintr: 0:10 INTA BIOS irq 10 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci_cfgintr: 0:1 INTA routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596 UDMA33 controller> port 0xe000-0xe00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached) xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe800-0xe87f mem 0xdf800000-0xdf80007f irq 11 at device 8.0 on pci0 xl0: Ethernet address: 00:50:da:45:92:81 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <multimedia, audio> at device 10.0 (no driver attached) orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 501140354 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 1000 packets/entry by default GEOM: create disk ad0 dp=0xc1c48370 ad0: 2014MB <ST32122A> [4092/16/63] at ata0-master UDMA33 acd0: CDROM <CD-ROM 50X> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 7.2 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 7.2 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 7.2 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 Kernel Config: firewall% cat /usr/src/sys/i386/conf/FIREWALL machine i386 cpu I686_CPU ident FIREWALL maxusers 0 options SCHED_4BSD #4BSD scheduler options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 #options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current makeoptions DEBUG=-g options DDB #Enable the kernel debugger options DDB_UNATTENDED #options INVARIANTS #Enable calls of extra sanity checking #options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed device isa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver # syscons is the default console driver, resembling an SCO console device sc #device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device ppi # Parallel port interface device # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # Firewall Stuff options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=1000 options IPDIVERT firewall% Jaco van Tonder Magic Developer :: Premsoft Development (Pty) Ltd Direct: +27 11 312 2122 :: Fax: +27 11 312 2122 :: Mobile: +27 83 417 5424 Email: jaco_at_premsoft.co.za :: Web: http://www.premsoft.co.za/ PGP: http://www.premsoft.co.za/jaco/jaco_premsoft.ascReceived on Thu Nov 06 2003 - 08:03:41 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:27 UTC