Re: cbb cardbus activation failed

On Mon, 2003-11-17 at 08:44, Philippe Charnier wrote:
> Salut,
> 
> Doug Rabson <dfr_at_nlsystems.com> wrote:
> 
> >On Sat, 2003-11-15 at 22:32, Philippe Charnier wrote:
> >> Hello,
> >> 
> >> I have a Compaq armada 7800 with a noname pccard ethernet adapter
> >> which used to be detected as:
> >> 
> >> rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem 0x88000000-0x880001f
> >f irq 11 at device 0.0 on cardbus0
> >> rl0: Ethernet address: 00:10:60:58:60:b8
> >> miibus0: <MII bus> on rl0
> >> rlphy0: <RealTek internal media interface> on miibus0
> >> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> >> rl0: bpf attached
> >> 
> >> After revision 1.222 of src/sys/pci/if_rl.c, the card is not detected
> >> anymore and I get:
> >> 
> >> cardbus0: <network, ethernet> at device 0.0 (no driver attached)
> >> cbb0: CardBus card activation failed
> >
> >Which version of dev/cardbus/cardbus.c and dev/pci/pci.c do you have?
> >
> >
> 
> In a CET timezone (1 hour shift against UTC) I got a working kernel
> using cvs update -D "november 3" which gives if_rl.c(1.121)
> cardbus.c(1.42) and pci.c(1.234). I got a failing kernel using cvs
> update -D "november 5" which gives if_rl.c(1.122) cardbus.c(1.42) and
> pci.c(1.235). I don't think 1.234->1.235 of pci.c (committed by jhb_at_)
> is relevant here ("Enable PCI interrupt routing for i386 SMP kernels")
> because SMP is not defined in my kernel configuration file. Using
> if_rl.c(1.125 but with 1.121->1.122 reverted), I have a running kernel
> with cardbus(1.42) and pci.c(1.235) which is -current. I takes nearly
> 2 hours to get a new kernel, but if you need more testing, just ask.

Now I'm very confused. I can't see why the rl driver should be different
from any of the other cardbus-supporting drivers which still work. Could
I see your kernel config file?