Re: geom<->ata forever cycle

From: Nick H. -- Network Operations <nickh_at_supportteam.net>
Date: Sat, 22 Nov 2003 08:39:26 -0600
heh.  IBM?  It's bad.  All of the ones that I had (also running -current
from within 24 hours) that were spitting that were bad (All were POS IBMs
too!). Just my guess, however.



Regards,
Nick H.
Network Operations Center
nickh_at_supportteam.net

Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsupport.com/
-------------------------------------------
Privileged/Confidential Information may be contained in this message.  If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone.  In such case, you should destroy this message and kindly
notify the sender by reply email.  Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.

----- Original Message ----- 
From: "Valentin Nechayev" <netch_at_netch.kiev.ua>
To: "Nick H. -- Network Operations" <nickh_at_supportteam.net>
Cc: <current_at_freebsd.org>
Sent: Saturday, November 22, 2003 8:21 AM
Subject: Re: geom<->ata forever cycle


> Sat, Nov 22, 2003 at 05:45:09, nickh wrote about "Re: geom<->ata forever
cycle":
>
> > Personally I dont think this is GEOM related.  I had a drive start doing
>
> Yes, it is ATAng related, AFAIS, but triggers GEOM forever cycle.
>
> > this to me (happens often as I work in a large datacenter) and the drive
is
> > about to die.  What brand drive is it and how old is it?  You may waanna
> > look into replacing the drive if you have that option.  I had one
tonight
> > that did that to me, swap the drive, fixed.
>
> System has IBM DJNA-351520 and IBM IC35L040AVER07. They are alive and
good.
> All other systems, including Win98, RedHat 8.0, FreeBSD 4.9 and
> FreeBSD-5.1 of May 2003, works well with these drivers.
> Hence, only fresh -current is broken.
>
> Full dmesg.boot of oldest -current follows.
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.1-BETA-20030523 #2: Sun May 25 00:28:30 EEST 2003
>     root_at_:/var/obj/var/HEAD/src/sys/nn15
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc044c000.
> Preloaded elf module "/boot/modules/if_rl.ko" at 0xc044c1f4.
> Preloaded elf module "/boot/modules/miibus.ko" at 0xc044c2a0.
> Calibrating clock(s) ... i8254 clock: 1193010 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254"  frequency 1193182 Hz
> Calibrating TSC clock ... TSC clock: 799435869 Hz
> Timecounter "TSC"  frequency 799435869 Hz
> CPU: Intel Celeron (799.44-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
>
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 268369920 (255 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000473000 - 0x000000000fb31fff, 258732032 bytes (63167 pages)
> avail memory = 255709184 (243 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00fad00
> bios32: Entry = 0xfb190 (c00fb190)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xb1c0
> pnpbios: Found PnP BIOS data at 0xc00fbbb0
> pnpbios: Entry = f0000:bbe0  Rev = 1.0
> Other BIOS signatures found:
> null: <null device, zero device>
> random: <entropy source>
> mem: <memory & I/O>
> Pentium Pro MTRR support enabled
> VESA: information block
> 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
> 00 01 80 00 05 02 07 01 00 01 1a 01 00 01 23 01
> 00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01
> 07 01 08 01 09 01 0a 01 0b 01 0c 01 0e 01 0f 01
> VESA: 33 mode(s) found
> VESA: v3.0, 8192k memory, flags:0x1, mode table:0xc03ac7c2 (1000022)
> VESA: NVidia
> VESA: NVidia Corporation Riva TNT Chip Rev B1
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
> pcibios: BIOS version 2.10
> Using $PIR table, 10 entries at 0xc00fded0
> PCI-Only Interrupts: 5 9 11
> Location  Bus Device Pin  Link  IRQs
> slot 1      0    2    A   0x60  3 4 5 7 9 10 11 14 15
> slot 1      0    2    B   0x61  3 4 5 7 9 10 11 14 15
> slot 1      0    2    C   0x62  3 4 5 7 9 10 11 14 15
> slot 1      0    2    D   0x63  3 4 5 7 9 10 11 14 15
> slot 2      2    8    A   0x68  3 4 5 7 9 10 11 14 15
> slot 2      2    8    B   0x69  3 4 5 7 9 10 11 14 15
> slot 2      2    8    C   0x6a  3 4 5 7 9 10 11 14 15
> slot 2      2    8    D   0x6b  3 4 5 7 9 10 11 14 15
> slot 3      2    0    A   0x60  3 4 5 7 9 10 11 14 15
> slot 3      2    0    B   0x61  3 4 5 7 9 10 11 14 15
> slot 3      2    0    C   0x62  3 4 5 7 9 10 11 14 15
> slot 3      2    0    D   0x63  3 4 5 7 9 10 11 14 15
> slot 4      2    1    A   0x61  3 4 5 7 9 10 11 14 15
> slot 4      2    1    B   0x62  3 4 5 7 9 10 11 14 15
> slot 4      2    1    C   0x63  3 4 5 7 9 10 11 14 15
> slot 4      2    1    D   0x60  3 4 5 7 9 10 11 14 15
> slot 5      2    6    A   0x62  3 4 5 7 9 10 11 14 15
> slot 5      2    6    B   0x63  3 4 5 7 9 10 11 14 15
> slot 5      2    6    C   0x60  3 4 5 7 9 10 11 14 15
> slot 5      2    6    D   0x61  3 4 5 7 9 10 11 14 15
> slot 6      2    7    A   0x63  3 4 5 7 9 10 11 14 15
> slot 6      2    7    B   0x60  3 4 5 7 9 10 11 14 15
> slot 6      2    7    C   0x61  3 4 5 7 9 10 11 14 15
> slot 6      2    7    D   0x62  3 4 5 7 9 10 11 14 15
> slot 7      2    9    A   0x61  3 4 5 7 9 10 11 14 15
> slot 7      2    9    B   0x62  3 4 5 7 9 10 11 14 15
> slot 7      2    9    C   0x63  3 4 5 7 9 10 11 14 15
> slot 7      2    9    D   0x60  3 4 5 7 9 10 11 14 15
> slot 8      2   10    A   0x62  3 4 5 7 9 10 11 14 15
> slot 8      2   10    B   0x63  3 4 5 7 9 10 11 14 15
> slot 8      2   10    C   0x60  3 4 5 7 9 10 11 14 15
> slot 8      2   10    D   0x61  3 4 5 7 9 10 11 14 15
> embedded    0   31    A   0x60  3 4 5 7 9 10 11 14 15
> embedded    0   31    B   0x61  3 4 5 7 9 10 11 14 15
> embedded    0   31    C   0x6b  3 4 5 7 9 10 11 14 15
> embedded    0   31    D   0x63  3 4 5 7 9 10 11 14 15
> embedded    0    1    A   0x60  3 4 5 7 9 10 11 14 15
> embedded    0    1    B   0x61  3 4 5 7 9 10 11 14 15
> embedded    0    1    C   0x62  3 4 5 7 9 10 11 14 15
> embedded    0    1    D   0x63  3 4 5 7 9 10 11 14 15
> pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on
motherboard
> pci0: <PCI bus> on pcib0
> pci0: physical bus=0
> map[10]: type 3, range 32, base e4000000, size 26, enabled
> found-> vendor=0x8086, dev=0x1130, revid=0x02
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x1131, revid=0x02
> bus=0, slot=1, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x244e, revid=0x02
> bus=0, slot=30, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2440, revid=0x02
> bus=0, slot=31, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[20]: type 4, range 32, base 0000f000, size  4, enabled
> found-> vendor=0x8086, dev=0x244b, revid=0x02
> bus=0, slot=31, func=1
> class=01-01-80, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[20]: type 4, range 32, base 0000d000, size  5, enabled
> found-> vendor=0x8086, dev=0x2442, revid=0x02
> bus=0, slot=31, func=2
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=d, irq=11
> map[20]: type 4, range 32, base 0000d400, size  5, enabled
> found-> vendor=0x8086, dev=0x2444, revid=0x02
> bus=0, slot=31, func=4
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=11
> map[10]: type 4, range 32, base 0000d800, size  8, enabled
> map[14]: type 4, range 32, base 0000dc00, size  6, enabled
> found-> vendor=0x8086, dev=0x2445, revid=0x02
> bus=0, slot=31, func=5
> class=04-01-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=9
> agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem
0xe4000000-0xe7ffffff at device 0.0 on pci0
> agp0: allocating GATT for aperture of size 64M
> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0xf000-0xfff
> pcib1:   memory decode     0xec000000-0xedffffff
> pcib1:   prefetched decode 0xea000000-0xebffffff
> pci1: <PCI bus> on pcib1
> pci1: physical bus=1
> map[10]: type 1, range 32, base ec000000, size 24, enabled
> map[14]: type 3, range 32, base ea000000, size 25, enabled
> found-> vendor=0x10de, dev=0x002c, revid=0x15
> bus=1, slot=0, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
> intpin=a, irq=5
> powerspec 1  supports D0 D3  current D0
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
> pcib2:   secondary bus     2
> pcib2:   subordinate bus   2
> pcib2:   I/O decode        0xc000-0xcfff
> pcib2:   memory decode     0xee000000-0xee0fffff
> pcib2:   prefetched decode 0xfff00000-0xfffff
> pci2: <PCI bus> on pcib2
> pci2: physical bus=2
> map[10]: type 4, range 32, base 0000c000, size  8, enabled
> map[14]: type 1, range 32, base ee000000, size  8, enabled
> found-> vendor=0x10ec, dev=0x8139, revid=0x10
> bus=2, slot=10, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
> intpin=a, irq=11
> powerspec 2  supports D0 D1 D2 D3  current D0
> rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee000000-0xee0000ff irq 11 at device 10.0 on pci2
> pcib2: device rl0 requested decoded I/O range 0xc000-0xc0ff
> rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
> rl0: Ethernet address: 00:40:f4:65:6e:f8
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: bpf attached
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f at device 31.1
on pci0
> ata0: pre reset mask=03 ostat0=50 ostat2=00
> ata0-master: ATAPI 00 00
> ata0-slave: ATAPI 14 eb
> ata0: after reset mask=03 stat0=50 stat1=00
> ata0-master: ATA 01 a5
> ata0: devices=09
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: pre reset mask=03 ostat0=50 ostat2=00
> ata1-master: ATAPI 00 00
> ata1-slave: ATAPI 00 00
> ata1: after reset mask=03 stat0=50 stat1=00
> ata1-master: ATA 01 a5
> ata1: devices=01
> ata1: at 0x170 irq 15 on atapci0
> pci0: <serial bus, USB> at device 31.2 (no driver attached)
> pci0: <serial bus, USB> at device 31.4 (no driver attached)
> pcm0: <Intel 82801BA (ICH2)> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 9 at
device 31.5 on pci0
> pcm0: <Realtek ALC100 AC97 Codec (id = 0x414c4326)>
> pcm0: Codec features 5 bit master volume, Realtek 3D Stereo Enhancement
> pcm0: Primary codec extended features AMAP
> pcm0: sndbuf_setmap 5f8000, 4000; 0xd1d90000 -> 5f8000
> pcm0: sndbuf_setmap 615000, 4000; 0xd1d94000 -> 615000
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> pnpbios: 17 devices, largest 156 bytes
> PNP0000: adding irq mask 0x4
> PNP0000: adding io range 0x20-0x21, size=0x2, align=0
> PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
> pnpbios: handle 0 device ID PNP0000 (0000d041)
> PNP0200: adding dma mask 0x10
> PNP0200: adding io range 0-0xf, size=0x10, align=0
> PNP0200: adding io range 0x81-0x83, size=0x3, align=0
> PNP0200: adding io range 0x87-0x87, size=0x1, align=0
> PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
> PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
> pnpbios: handle 1 device ID PNP0200 (0002d041)
> PNP0100: adding irq mask 0x1
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0
> pnpbios: handle 2 device ID PNP0100 (0001d041)
> PNP0b00: adding irq mask 0x100
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
> pnpbios: handle 3 device ID PNP0b00 (000bd041)
> PNP0303: adding irq mask 0x2
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0
> pnpbios: handle 4 device ID PNP0303 (0303d041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0
> pnpbios: handle 5 device ID PNP0800 (0008d041)
> PNP0c04: adding irq mask 0x2000
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
> pnpbios: handle 6 device ID PNP0c04 (040cd041)
> INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
> pnpbios: handle 7 device ID INT0800 (0008d425)
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
> PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
> PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
> PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
> pnpbios: handle 8 device ID PNP0c01 (010cd041)
> PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
> PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
> PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
> PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
> pnpbios: handle 9 device ID PNP0c02 (020cd041)
> PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
> PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
> PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
> PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
> PNP0a03: adding io range 0x4000-0x40f7, size=0xf8, align=0
> pnpbios: handle 10 device ID PNP0a03 (030ad041)
> PNP0f13: adding irq mask 0x1000
> pnpbios: handle 11 device ID PNP0f13 (130fd041)
> PNP0501: adding irq mask 0x10
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
> pnpbios: handle 12 device ID PNP0501 (0105d041)
> PNP0400: adding irq mask 0x80
> PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
> PNP0400: adding io range 0x778-0x77b, size=0x4, align=0
> PNP0400: adding io range 0xb78-0xb7b, size=0x4, align=0
> PNP0400: adding io range 0xf78-0xf7b, size=0x4, align=0
> pnpbios: handle 14 device ID PNP0400 (0004d041)
> PNP0501: adding irq mask 0x8
> PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
> pnpbios: handle 16 device ID PNP0501 (0105d041)
> PNPb006: adding irq mask 0x400
> PNPb006: adding io range 0x330-0x331, size=0x2, align=0
> pnpbios: handle 17 device ID PNPb006 (06b0d041)
> PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
> PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
> pnpbios: handle 18 device ID PNPb02f (2fb0d041)
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> adv0: not probed (disabled)
> bt0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000000, packet size:4
> psm0: syncmask:08, syncbits:08
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x700ff
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
> bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> vt0: not probed (disabled)
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic1: not probed (disabled)
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: irq maps: 0x1 0x9 0x1 0x1
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> ppc0 failed to probe at irq 7 on isa0
> ed0: not probed (disabled)
> cs0: not probed (disabled)
> sn0: not probed (disabled)
> ie0: not probed (disabled)
> fe0: not probed (disabled)
> le0: not probed (disabled)
> lnc0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0303> at port 0x60 on isa0
> speaker0: <PC speaker> at port 0x61 on isa0
> unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff on isa0
> unknown: <PNP0f13> can't assign resources (irq)
> unknown: <PNP0f13> at irq 12 on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
> unknown: <PNP0400> failed to probe at port
0xf78-0xf7b,0xb78-0xb7b,0x778-0x77b,0x378-0x37f irq 7 on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
> unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 10 on isa0
> unknown: <PNPb02f> failed to probe at port 0x200,0x201-0x207 on isa0
> Device configuration finished.
> linprocfs registered
> procfs registered
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert disabled, rule-based forwarding enabled, default
to accept, logging unlimited
> lo0: bpf attached
> Linux ELF exec handler installed
> ad0: success setting UDMA66 on Intel ICH2 chip
> ad0: <IBM-DJNA-351520/J56OA30K> ATA-4 disk at ata0-master
> ad0: 14664MB (30033360 sectors), 29795 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, UDMA66
> ad0: piomode=12 dmamode=34 udmamode=68 cblid=0
> GEOM: new disk ad0
> ar: FreeBSD check1 failed
> ad2: success setting UDMA100 on Intel ICH2 chip
> ad2: <IC35L040AVER07-0/ER4OA44A> ATA-5 disk at ata1-master
> ad2: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
> ad2: 16 secs/int, 1 depth queue, UDMA100
> ad2: piomode=12 dmamode=34 udmamode=69 cblid=1
> ar: FreeBSD check1 failed
> ata0-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1
> ata0-slave: success setting UDMA33 on Intel ICH2 chip
> acd0: <CD-540E/1.0A> CDROM drive at ata0 as slave
> acd0: read 6890KB/s (36026KB/s), 128KB buffer, UDMA33
> acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
> acd0: Writes:
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> pcm0: measured ac97 link rate at 48015 Hz, will use 48000 Hz
> [0] f:80 typ:6 s(CHS):0/1/1 e(CHS):186/254/63 s:63 l:3004092
> [1] f:00 typ:15 s(CHS):577/0/1 e(CHS):1023/254/63 s:9269505 l:20755980
> [2] f:00 typ:165 s(CHS):187/0/1 e(CHS):257/254/63 s:3004155 l:1140615
> [3] f:00 typ:165 s(CHS):258/0/1 e(CHS):576/254/63 s:4144770 l:5124735
> GEOM: Configure ad0s1, start 32256 length 1538095104 end 1538127359
> GEOM: Configure ad0s2, start 4745986560 length 10627061760 end 15373048319
> GEOM: Configure ad0s3, start 1538127360 length 583994880 end 2122122239
> GEOM: Configure ad0s4, start 2122122240 length 2623864320 end 4745986559
> GEOM: new disk ad2
> MBREXT Slice 5 on ad0s2:
> [0] f:00 typ:165 s(CHS):577/1/1 e(CHS):1023/254/63 s:63 l:15888222
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:15888285 l:2040255
> GEOM: Configure ad0s5, start 32256 length 8134769664 end 8134801919
> MBREXT Slice 6 on ad0s2:
> [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2040192
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17928540 l:16065
> GEOM: Configure ad0s6, start 8134834176 length 1044578304 end 9179412479
> MBREXT Slice 7 on ad0s2:
> [0] f:00 typ:3 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:16002
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17944605 l:16065
> GEOM: Configure ad0s7, start 9179444736 length 8193024 end 9187637759
> MBREXT Slice 8 on ad0s2:
> [0] f:00 typ:3 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:16002
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:17960670 l:2152710
> GEOM: Configure ad0s8, start 9187670016 length 8193024 end 9195863039
> MBREXT Slice 9 on ad0s2:
> [0] f:00 typ:3 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2152647
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:20113380 l:642600
> GEOM: Configure ad0s9, start 9195895296 length 1102155264 end 10298050559
> MBREXT Slice 10 on ad0s2:
> [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:642537
> [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure ad0s10, start 10298082816 length 328978944 end 10627061759
> GEOM: Configure ad0s3a, start 0 length 583994880 end 583994879
> GEOM: Configure ad0s3c, start 0 length 583994880 end 583994879
> GEOM: Configure ad0s4a, start 0 length 524288000 end 524287999
> GEOM: Configure ad0s4c, start 0 length 2623864320 end 2623864319
> GEOM: Configure ad0s4e, start 524288000 length 2097152000 end 2621439999
> [0] f:80 typ:2 s(CHS):0/1/1 e(CHS):249/254/63 s:63 l:4016187
> [1] f:00 typ:165 s(CHS):250/0/1 e(CHS):827/254/63 s:4016250 l:9285570
> [2] f:00 typ:15 s(CHS):1010/0/1 e(CHS):1023/254/63 s:16225650 l:64179675
> [3] f:00 typ:3 s(CHS):828/0/1 e(CHS):1009/254/63 s:13301820 l:2923830
> GEOM: Configure ad2s1, start 32256 length 2056287744 end 2056319999
> GEOM: Configure ad2s2, start 2056320000 length 4754211840 end 6810531839
> GEOM: Configure ad2s3, start 8307532800 length 32859993600 end 41167526399
> GEOM: Configure ad2s4, start 6810531840 length 1497000960 end 8307532799
> WARNING: Expected rawoffset 9269505, found 9269568
> GEOM: Configure ad0s5b, start 8192 length 524288000 end 524296191
> GEOM: Configure ad0s5c, start 0 length 8134769664 end 8134769663
> GEOM: Configure ad0s5e, start 524296192 length 7603321344 end 8127617535
> GEOM: Configure ad2s2a, start 0 length 524288000 end 524287999
> GEOM: Configure ad2s2c, start 0 length 4754211840 end 4754211839
> GEOM: Configure ad2s2e, start 524288000 length 2097152000 end 2621439999
> MBREXT Slice 5 on ad2s3:
> [0] f:00 typ:131 s(CHS):1010/1/1 e(CHS):1013/254/63 s:63 l:64197
> [1] f:00 typ:5 s(CHS):1014/0/1 e(CHS):1017/254/63 s:64260 l:64260
> GEOM: Configure ad2s5, start 32256 length 32868864 end 32901119
> MBREXT Slice 6 on ad2s3:
> [0] f:00 typ:131 s(CHS):1014/1/1 e(CHS):1017/254/63 s:63 l:64197
> [1] f:00 typ:5 s(CHS):1018/0/1 e(CHS):1023/254/63 s:128520 l:16386300
> GEOM: Configure ad2s6, start 32933376 length 32868864 end 65802239
> MBREXT Slice 7 on ad2s3:
> [0] f:00 typ:165 s(CHS):1018/1/1 e(CHS):1023/254/63 s:63 l:16386237
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:16514820 l:16386300
> GEOM: Configure ad2s7, start 65834496 length 8389753344 end 8455587839
> MBREXT Slice 8 on ad2s3:
> [0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:16386237
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:32901120 l:1044225
> GEOM: Configure ad2s8, start 8455620096 length 8389753344 end 16845373439
> MBREXT Slice 9 on ad2s3:
> [0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1044162
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:33945345 l:2040255
> GEOM: Configure ad2s9, start 16845405696 length 534610944 end 17380016639
> MBREXT Slice 10 on ad2s3:
> [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2040192
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:35985600 l:10297665
> GEOM: Configure ad2s10, start 17380048896 length 1044578304 end
18424627199
> MBREXT Slice 11 on ad2s3:
> [0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:10297602
> [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:46283265 l:17896410
> GEOM: Configure ad2s11, start 18424659456 length 5272372224 end
23697031679
> MBREXT Slice 12 on ad2s3:
> [0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:17896347
> [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure ad2s12, start 23697063936 length 9162929664 end
32859993599
> WARNING: Expected rawoffset 16225650, found 16354233
> GEOM: Configure ad2s7b, start 0 length 262144000 end 262143999
> GEOM: Configure ad2s7c, start 0 length 8389753344 end 8389753343
> GEOM: Configure ad2s7e, start 262144000 length 524288000 end 786431999
> GEOM: Configure ad2s7f, start 786432000 length 7603321344 end 8389753343
> Mounting root from ufs:/dev/ad0s4a
> start_init: trying /sbin/init
> ad0: UDMA ICRC error cmd=read fsbn 4397730 of 4397730-4397857 retrying
> ad0: UDMA ICRC error cmd=read fsbn 4398442 of 4398442-4398569 retrying
> ad0: UDMA ICRC error cmd=read fsbn 4398442 of 4398442-4398569 retrying
> ad0: UDMA ICRC error cmd=read fsbn 4398442 of 4398442-4398569 retrying
> ad0: UDMA ICRC error cmd=read fsbn 4398442 of 4398442-4398569ad0: success
setting PIO4 on Intel ICH2 chip
>  falling back to PIO mode
>
> -netch-
Received on Sat Nov 22 2003 - 05:37:12 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:30 UTC