Intel SE7500WV2 not working with ACPI

From: Brooks Davis <brooks_at_one-eyed-alien.net>
Date: Tue, 25 Nov 2003 09:51:02 -0800
Since the interrupt changes, my dual Xeons based on the SE7500WV2 board
don't work with ACPI.  Specificly, the onboard nics (em0 and em1)
appear to not be recieving interupts.  Instead, they continiously get
watchdog timeouts.  In a stock current, this is an instant panic.  With
a minor fix to the watchdog function, the system sees to be more or less
funcitonal other then not having a network.  Disabling ACPI makes the
nics work.  I have updated the BIOS to the latest version[0].

I've included ACPI and non-ACPI dmesg output below.  What else is needed
to diagnose this problem?  Any patches I should try?

-- Brooks

[0] In a way, I'm glad the BIOS update didn't fix the problem because
that would probably mean I'd have to flash another 70 machines.

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Tue Nov 11 14:45:00 PST 2003
    brooks_at_fellow.sea.one-eyed-alien.net:/usr/home/brooks/working/freebsd/p4/xname/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a75000.
ACPI APIC Table: <INTEL  SWV20   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 2.20GHz (2193.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1023 MB)
avail memory = 1033482240 (985 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
lapic0: Forcing LINT1 to edge trigger
Pentium Pro MTRR support enabled
    ACPI-0660: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0660: *** Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope)
acpi0: <INTEL  SWV20   > on motherboard
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.SBRG.EC0_._REG] (Node 0xc29b4660), AE_NOT_EXIST
acpi0: Could not initialise SystemIO handler: AE_NOT_EXIST
device_probe_and_attach: acpi0 attach returned 6
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 19 entries at 0xc00f3060
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:29 INTA BIOS irq 5
pci_cfgintr: 0:29 INTB BIOS irq 10
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci2
pci4: <PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <PCIBIOS PCI-PCI bridge> at device 31.0 on pci2
pci3: <PCI bus> on pcib3
pci_cfgintr: 3:7 INTA BIOS irq 5
pci_cfgintr: 3:7 INTB BIOS irq 5
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x2040-0x207f mem 0xfeac0000-0xfeadffff irq 5 at device 7.0 on pci3
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x2000-0x203f mem 0xfeae0000-0xfeafffff irq 5 at device 7.1 on pci3
em1:  Speed:N/A  Duplex:N/A
pci0: <unknown> at device 3.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x3020-0x303f irq 5 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x3000-0x301f irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib4: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib4
pci_cfgintr: 1:2 INTA BIOS irq 9
pci_cfgintr: 1:12 INTA BIOS irq 11
atapci0: <Promise PDC20277 UDMA133 controller> port 0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407 mem 0xfe9e0000-0xfe9e3fff irq 9 at device 2.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x1400 on atapci0
ata2: [MPSAFE]
ata3: at 0x1410 on atapci0
ata3: [MPSAFE]
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH3 UDMA100 controller> port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)

Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6a48e70
ad0: 39266MB <IC35L040AVVA07-0> [79780/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
GEOM: create disk ad6 dp=0xc6a48c70
ad6: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata3-master UDMA100
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/ad0s1a
em1: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex
em0: watchdog timeout -- resetting
em1: watchdog timeout -- resetting
em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 1000 Mbps Full Duplex
em0: watchdog timeout -- resetting
em0: Link is up 1000 Mbps Full Duplex
em0: watchdog timeout -- resetting
em0: Link is up 1000 Mbps Full Duplex
em0: watchdog timeout -- resetting
em1: watchdog timeout -- resetting
em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 1000 Mbps Full Duplex
em0: watchdog timeout -- resetting
em1: watchdog timeout -- resetting
em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 1000 Mbps Full Duplex
em0: watchdog timeout -- resetting
em1: watchdog timeout -- resetting
em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 1000 Mbps Full Duplex
boot() called on cpu#1
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 15 14 11 11 1 1 
done
Uptime: 2m5s
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Tue Nov 11 14:45:00 PST 2003
    brooks_at_fellow.sea.one-eyed-alien.net:/usr/home/brooks/working/freebsd/p4/xname/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a75000.
MPTable: <INTEL    SWV20       >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 2.20GHz (2193.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1023 MB)
avail memory = 1033482240 (985 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 19 entries at 0xc00f3060
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 29 INTA routed to irq 16
pcib0: slot 29 INTB routed to irq 19
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 29.0 on pci2
pci4: <PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <MPTable PCI-PCI bridge> at device 31.0 on pci2
pci3: <PCI bus> on pcib3
pcib3: slot 7 INTA routed to irq 30
pcib3: slot 7 INTB routed to irq 31
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x2040-0x207f mem 0xfeac0000-0xfeadffff irq 30 at device 7.0 on pci3
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x2000-0x203f mem 0xfeae0000-0xfeafffff irq 31 at device 7.1 on pci3
em1:  Speed:N/A  Duplex:N/A
pci0: <unknown> at device 3.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x3020-0x303f irq 16 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x3000-0x301f irq 19 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib4
pcib4: slot 2 INTA routed to irq 18
pcib4: slot 12 INTA routed to irq 17
atapci0: <Promise PDC20277 UDMA133 controller> port 0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407 mem 0xfe9e0000-0xfe9e3fff irq 18 at device 2.0 on pci1
atapci0: [MPSAFE]
ata2: at 0x1400 on atapci0
ata2: [MPSAFE]
ata3: at 0x1410 on atapci0
ata3: [MPSAFE]
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH3 UDMA100 controller> port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)

Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6a3c570
ad0: 39266MB <IC35L040AVVA07-0> [79780/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master PIO4
GEOM: create disk ad6 dp=0xc6a3c370
ad6: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata3-master UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
em1: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex

-- 
Any statement of the form "X is the one, true Y" is FALSE.
PGP fingerprint 655D 519C 26A7 82E7 2529  9BF0 5D8E 8BE9 F238 1AD4

Received on Tue Nov 25 2003 - 08:51:07 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:31 UTC